SBS - The Best Value in QMS software

Design of Dimensional Measurement Gage for Bolt

N

nishant55555

#1
Can anyone tell me how can I design Gage for Bolt? What things we measure in Bolt? Do I need double Gage? I am little bit confused about double gage? Please if anyone know about it, let me know.
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#3
Re: Design of Gage for Bolt

Can anyone tell me how can I design Gage for Bolt? What things we measure in Bolt? Do I need double Gage? I am little bit confused about double gage? Please if anyone know about it, let me know.
Can you provide us with some details? Some of our Fellow Covers are thread gage experts, but need a little more to help you. Can you post/attach a sketch?

Stijloor.
 
N

nishant55555

#4
Jim.
yes its threaded fastener. Its like nut and bolt. I am not sure exactly what various parameters we can measure in bolt. So can you please tell me about it?
Stijloor, I not looking at specific bolt as such. But for example we can take M16*1.25 bolt.I don't have any sketch of bolt.

And guys, can you please help me in double gage, if you have heard about it? I am confused about it.

Nishant
 

Stijloor

Staff member
Super Moderator
#5
Jim.
yes its threaded fastener. Its like nut and bolt. I am not sure exactly what various parameters we can measure in bolt. So can you please tell me about it?
Stijloor, I not looking at specific bolt as such. But for example we can take M16*1.25 bolt.I don't have any sketch of bolt.

And guys, can you please help me in double gage, if you have heard about it? I am confused about it.

Nishant
I am sure that our Fellow Covers will chime in soon.

Threads can be measured with a pitch micrometer (variables measurement).
I have also used (in a previous life ;)) thread gages such as a ring gage and a snap-type gage (Go-No Go, attributes gage).

The "double gage" you are referring to may be the snap-gage type.

Stijloor.
 
N

nishant55555

#6
Thank you for reply.
Can you please tell me how to design a gage for this particular application? What parameters we measure in this bolt?
Is there any standard procedure to design such a gage?

Nishant
 

Jim Wynne

Staff member
Admin
#7
Thank you for reply.
Can you please tell me how to design a gage for this particular application? What parameters we measure in this bolt?
Is there any standard procedure to design such a gage?

Nishant
Please tell us more about the application. Why can't you use standard thread gages? Why do you feel you need to design a gage? If you're not sure what parameters to measure, how do you know you need to measure at all?
 
N

nishant55555

#8
Actually its about the measurement of bolt for fitting application. I can use standard gage. I am learning to design gages. And I am not sure what all parameter we can measure in bolt so i need to find out.
I know things I am asking are little confusing but I am learning basics of gage design .So I am in need of this information. I hope you understand what I am looking for.
Nishant
 

Stijloor

Staff member
Super Moderator
#9
Actually its about the measurement of bolt for fitting application. I can use standard gage. I am learning to design gages. And I am not sure what all parameter we can measure in bolt so i need to find out.
I know things I am asking are little confusing but I am learning basics of gage design .So I am in need of this information. I hope you understand what I am looking for.
Nishant
I already sensed that. Maybe you should start here. Including this and this.

It's very difficult to help you with a specific question if you do not understand the basics of gage design and development.

Stijloor.
 
Thread starter Similar threads Forum Replies Date
M Design Review/Dimensional Analysis feasibility program or spreadsheet? Design and Development of Products and Processes 1
T Design Traceability - Labelling / Instructions for Use ISO 13485:2016 - Medical Device Quality Management Systems 5
B How to exclude empty rows in full factorial design analysis? Using Minitab Software 0
M Handling design changes with use-as-is inventory disposition Quality Manager and Management Related Issues 6
M Design Control - Management of Electronic CAD files Design and Development of Products and Processes 11
S Examples of FDA acceptable Software Design Specification (SDS) Medical Device and FDA Regulations and Standards News 6
A Design Change/ECO Related Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
R Using R package to implement Bayesian phase I/II dose-finding design for three outcomes ISO 13485:2016 - Medical Device Quality Management Systems 6
C ISO 9001:2015 8.3.2. h) Design and Development Planning - What is required? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Z Software for design control ISO 13485:2016 - Medical Device Quality Management Systems 5
E Design and Development file Procedure ISO 13485:2016 - Medical Device Quality Management Systems 0
DuncanGibbons Section 8.3 relevant for design organisations AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
P DFMEA - Machinery Design Best Practices FMEA and Control Plans 0
R Is a FAIR required on parts that we design? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
U API Spec Q1 - 5.6.1.2 C (3) - Design software Oil and Gas Industry Standards and Regulations 3
N Example for design and development planning,input,output,review,verification,validation and transfer Misc. Quality Assurance and Business Systems Related Topics 4
A 8.6 Release of products and services, 8.3 Design and development - evidence required ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
C Stress / Challenge Conditions for Design Verification Testing to Reduce Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
J Significant change related to design and intended use EU Medical Device Regulations 3
S Traceability of requirements to design and risk Design and Development of Products and Processes 3
U NOC - What is considered a "design change" EU Medical Device Regulations 5
Q PPT used as Design Review ISO 13485:2016 - Medical Device Quality Management Systems 3
D Design Verification Sample Size vs Repeats Statistical Analysis Tools, Techniques and SPC 9
A Design and development procedure for API Spec Q2 Oil and Gas Industry Standards and Regulations 6
D Design controls - Inputs, outputs, V&V, DHF, DMR ISO 13485:2016 - Medical Device Quality Management Systems 10
LostLouie Manufacturer divorced from Design process, is he justified in design process deficiencies? ISO 13485:2016 - Medical Device Quality Management Systems 9
R DFA & DFM - Examples for Design for assembly and design for manufacturability Lean in Manufacturing and Service Industries 2
D Using Laboratory Notebooks in R&D and Design and Development ISO 13485:2016 - Medical Device Quality Management Systems 3
D ISO 13485 - 7.3.6 Design and development verification - Do most folks create a separate SOP? ISO 13485:2016 - Medical Device Quality Management Systems 6
K Joint approval between OEM and Manufacturer on Design Documents ISO 13485:2016 - Medical Device Quality Management Systems 4
M API 4F/7K/8C Design Package Validation Oil and Gas Industry Standards and Regulations 2
A Design History File - Not ready to share the design drawings or Bill of Material US Food and Drug Administration (FDA) 2
W Need for current design or process control FMEA and Control Plans 2
A What is the difference between Design Process, Process Design and Design Control? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
D Test summary report example for design validation wanted - ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 1
B Why the Greek god Hephaestus should have done a design FMEA (DFMEA) on his giant robot APQP and PPAP 1
S Documenting Design Verification Test Results (ISO 9001) Design and Development of Products and Processes 1
DuncanGibbons Understanding the applicability of Design of Experiments to the IQ OQ PQ qualification approach Qualification and Validation (including 21 CFR Part 11) 5
S Requirement to Conduct New Shelf-life Testing? (re-do testing for design change) EU Medical Device Regulations 3
A Sample Agreement available for Outsourcing Medical Device Design activity? ISO 13485:2016 - Medical Device Quality Management Systems 1
DuncanGibbons How is the arrangement between Design and Production organisation envisaged? EASA and JAA Aviation Standards and Requirements 4
L Design & Development of a SERVICE Service Industry Specific Topics 13
C Documentation for items used for Design Verification 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
P Design verification driven by new equipment. How is this different than process validation? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
A AS9102B - 3.6 Design Characteristics and form 3 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
P Design FMEA - Detection Rating criteria ISO 14971 - Medical Device Risk Management 3
U Medical Device Design finalization testing ISO 13485:2016 - Medical Device Quality Management Systems 2
S MDR Delay - MDD design Change? (before new MDR DOA) EU Medical Device Regulations 8
J Iterative design and production for custom made products ISO 13485:2016 - Medical Device Quality Management Systems 3
T Design Input detail & specificity ISO 13485:2016 - Medical Device Quality Management Systems 6

Similar threads

Top Bottom