Design Review: Can I exclude Custom Products

S

Sign-Chrissie

#1
We have been primarily a job shop in the past, producing custom signs. We are adding ISO as we move more towards production work. Is there a way to write the design review section of our manual so it's less cumbersome for the one off products or just exclude them? As it stands right now this is going to be the most difficult requirement for us to meet.
 
Elsmar Forum Sponsor
S

somerqc

#2
Design review is ALWAYS one of the hardest elements to resolve.

That being said, I work for a company that has a very similar model to yours. We do custom as well as production work. There is no way you can omit it. It will be too obvious to any auditor worth anything that it is an integral part of your operations.

When you no longer do custom signs you can likely omit it; however, until then it would be awfully difficult to have a CB consider omitting it.

It is tough, but, over the years we have come up with a process that works for us.
 

harry

Super Moderator
#3
.................. As it stands right now this is going to be the most difficult requirement for us to meet.
Why? Why has it to be so - because the standard doesn't add any new requirements. It only recommend that you need to review your design and there are good reasons for doing it.

Upon completion of your design, do you check if you had met with customers requirements, any applicable legal requirements, any applicable engineering standards/requirements and your own business requirements. If you do, you're reviewing the design and a simple checklist could be all you need to show evidence of having done so.
 
Thread starter Similar threads Forum Replies Date
N Example for design and development planning,input,output,review,verification,validation and transfer Misc. Quality Assurance and Business Systems Related Topics 4
Q PPT used as Design Review ISO 13485:2016 - Medical Device Quality Management Systems 3
C Design Transfer Review - Before or after PQ validation? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
M Does a CDR (Critical Design Review) have to have a moderator that is unconnected to the team? Design and Development of Products and Processes 4
A What to expect in a Design Dossier Review for CE Marking by a Notified Body CE Marking (Conformité Européene) / CB Scheme 3
S Annex II List A - Notified Body Fees - Design dossier review and batch release EU Medical Device Regulations 2
G ISO 14001 & Product Design Process Environmental Aspect Review Requirements ISO 14001:2015 Specific Discussions 7
H How to make the Design Review Process Effective Design and Development of Products and Processes 1
H Form that will satisfy Design Review and Design Verification Requirements (7.3) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
P Please Review my Design and Development Plan Design and Development of Products and Processes 2
P How to separate Product Design Review, Verification, and Validation Activities ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 26
M 7.2.2 Review of Requirements Related to the Product (Design-Manufacturing Service) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
M MHRA (Medical & Healthcare Regulatory Agency) Design Dossier Review Delays EU Medical Device Regulations 2
L Time and Cost for a Notified Body to review a Design Dossier ISO 13485:2016 - Medical Device Quality Management Systems 7
S Design and Development - Review vs. Verification vs. Validation Design and Development of Products and Processes 15
U Medical Device Design Review Records Requirements Design and Development of Products and Processes 16
kedarg6500 Manufacturing Process Design and Development Review ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
S Checklist for RA and QA Review of DVT (design verification test) for Software Other US Medical Device Regulations 2
R Who should document the Design Review Meeting and Design History File? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
T Design Review Checklist for an Electrical Engineering Consultancy Design and Development of Products and Processes 4
A QSR (820.30 part e) Design Review and Design Control Responsibilities 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
M Manufacturing Process Design and Development Review - TS 16949 Clause 7.3.4 IATF 16949 - Automotive Quality Systems Standard 12
Q ISO 9001:2008 - 7.3.7 - Review of Evaluation of Design and Development Changes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
S Design Review Checklist Format Example wanted Design and Development of Products and Processes 16
A Design Review OR Design Change - Software development company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
Q Supplier Design Review Worksheet from a customer Supplier Quality Assurance and other Supplier Issues 1
M Design Review/Dimensional Analysis feasibility program or spreadsheet? Design and Development of Products and Processes 1
S Engineering Design Review minutes as Verification & Validation Records Design and Development of Products and Processes 7
J Design Review Participants - Medical Devices - Question Design and Development of Products and Processes 10
S Enhanced Design Review section - ISPE Commisioning and Qualification Guide Design and Development of Products and Processes 4
K Review of Design Dossier Design and Development of Products and Processes 1
B When is a Design Review required? - ISO9001:2000 Clause 7.3 Design and Development of Products and Processes 7
R Medical Device Product Requirements Document (PRD) a "Design Review"? Design and Development of Products and Processes 4
M Document Review Audit Findings - Design and Process Approach Design and Development of Products and Processes 2
P What results of a design review are documented in a DHF? Design and Development of Products and Processes 9
J DRBFM (Design Review Based on Failure Mode) - Toyota method Design and Development of Products and Processes 46
1 Design Review Process - Need a step by step methodology Design and Development of Products and Processes 4
H Design and Development Review 7.3.4 - Planned intervals for outputs and validation Design and Development of Products and Processes 3
Y ISO 9001 Design & Development - 7.3.4 Review, 7.3.5 Verify, 7.3.6 Validate Design and Development of Products and Processes 30
B Design - Simple System - ISO 9001 Clause 7.3 - Review vs. Verification vs. Validation Design and Development of Products and Processes 12
Z Reliability and Maintainability Design Review Guidelines Design and Development of Products and Processes 0
Z Appropriate Content for Design Review Documents Design and Development of Products and Processes 6
K Design Review Checklists Design and Development of Products and Processes 1
A Design Review Documentation Design and Development of Products and Processes 2
R Role of QA during Design and Development of Products and Processes Design and Development of Products and Processes 3
B Design Responsibilities for Mature Acquired Product Lines ISO 13485:2016 - Medical Device Quality Management Systems 3
I RWE Studies and Design Controls US Food and Drug Administration (FDA) 1
G How to record Regulations and Standards as Design Inputs? Design and Development of Products and Processes 15
T Design Traceability - Labelling / Instructions for Use ISO 13485:2016 - Medical Device Quality Management Systems 5
B How to exclude empty rows in full factorial design analysis? Using Minitab Software 0

Similar threads

Top Bottom