Designing a gauge to check the Axis of Snorkel of Axles

K

kiran karthik

#1
hai every one ,
my name is kiran karthik , am studying BE final year , and am doing a project based on designing gauges .
so please help me

i have to design a gauge to check the AXIS OF SNORKEL OF AXLES .,.

i really dont have any idea about it .,.,

i request to help me in this one ( please ):)


THANK U
 
Elsmar Forum Sponsor

Jim Wynne

Leader
Admin
#2
Re: Designing a gauge to check the Axis of Snorlel of Axles

hai every one ,
my name is kiran karthik , am studying BE final year , and am doing a project based on designing gauges .
so please help me

i have to design a gauge to check the AXIS OF SNORKEL OF AXLES .,.

i really dont have any idea about it .,.,

i request to help me in this one ( please ):)

THANK U
Welcome to the Cove. :bigwave:

For the benefit of those here (me, for instance) who are unaware that axles have snorkels, could you explain?
 
K

kiran karthik

#3
Re: Designing a gauge to check the Axis of Snorlel of Axles

Welcome to the Cove. :bigwave:

For the benefit of those here (me, for instance) who are unaware that axles have snorkels, could you explain?
sorry i dont knw how to explain it .,,.

can u tel me how to design a gauge to check the drills axis
 

Jim Wynne

Leader
Admin
#4
Re: Designing a gauge to check the Axis of Snorlel of Axles

sorry i dont knw how to explain it .,,.

can u tel me how to design a gauge to check the drills axis
You're asking for help in theoretically designing a gage for a characteristic that you can't explain or identify. You're now asking about a "drills axis." Are you sure you can't be more specific about what you're trying to do?
 
K

kiran karthik

#5
Re: Designing a gauge to check the Axis of Snorlel of Axles

You're asking for help in theoretically designing a gage for a characteristic that you can't explain or identify. You're now asking about a "drills axis." Are you sure you can't be more specific about what you're trying to do?
check this one
 

Attachments

K

kiran karthik

#6
actually i hv design a gauge for snorkel in axle which checks whether d axis of d snorkel is with in the tolerance or not with respect to the bearing axis and with respect to the boring axis at the center ...:)
 
Thread starter Similar threads Forum Replies Date
J Designing new gauge tracking software IATF 16949 - Automotive Quality Systems Standard 4
P Designing a "part-specific" Receiving Gauge - Gauge first or job? Design and Development of Products and Processes 4
S Earthing of moving parts, designing tips IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
A Leadership Role in Designing QMS - Upper Management Support Quality Manager and Management Related Issues 16
S Designing the experiment with minimum run Statistical Analysis Tools, Techniques and SPC 0
S Designing the experiment with minimum run Statistical Analysis Tools, Techniques and SPC 0
B Designing a Sampling Plan - AQL AQL - Acceptable Quality Level 19
F Designing a Hollow Medical Device for Autoclavability Other Medical Device and Orthopedic Related Topics 2
Claes Gefvenberg Designing Supplier Questionnaire Forms Supplier Quality Assurance and other Supplier Issues 25
M Designing a Quality Assurance and Control System Quality Manager and Management Related Issues 3
P Sheet Metal Design: Standard method for designing Electrical Knockouts Design and Development of Products and Processes 7
N Designing an attribute MSA for a new piece of metrology equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
R Line Balance Simulation when Designing a New Production Line Lean in Manufacturing and Service Industries 1
D Designing a Training Course called "Role of the Laboratory Quality Manager" Training - Internal, External, Online and Distance Learning 13
A Designing a Documents Control System from scratch (in a php intranet) Document Control Systems, Procedures, Forms and Templates 5
A Designing a Closed Loop Water System using Adiabatic Cooling Towers Manufacturing and Related Processes 5
R AS9100C Clause 7.3 Design & Development - Designing a System and Procedures AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S API Std 620 vs. API 650 standard? Which is the least restrictive in designing a tank? Manufacturing and Related Processes 1
A Designing an Ethylene Oxide Sterilization Process Other Medical Device Regulations World-Wide 7
M Designing a Nonconformance Management Process Nonconformance and Corrective Action 35
Q Are there any threads specifically concerned with designing with AutoCAD? Design and Development of Products and Processes 1
C Designing Control Charts - Variable with Small Variation and Tight Control Limit Statistical Analysis Tools, Techniques and SPC 20
C Designing control chart for non-normal variables Statistical Analysis Tools, Techniques and SPC 3
A Is the Assembly of the Prototype after Designing considered a Production Process? Design and Development of Products and Processes 11
M Designing a scope for APQP Design and Development of Products and Processes 2
B Designing a Test Part to Assess CMM Operator's Knowledge Design and Development of Products and Processes 9
D Designing an ISO 9001 Internal Audit Training Course - Need Help Internal Auditing 6
S Project Management QMS - Manufacturing and Designing of Special Purposed Machines Design and Development of Products and Processes 5
L Categories for data collection - Designing a form for when errors occur Nonconformance and Corrective Action 6
J Designing a Mil-Std-105 or ANSI/ASQ Z1.4 Sampling Plan Inspection, Prints (Drawings), Testing, Sampling and Related Topics 49
R Designing and building our own machines Design and Development of Products and Processes 5
V Designing an integrated ISO 9000 - ISO 14000 System in a Big Marine Port Design and Development of Products and Processes 3
S US Success in Designing & Manufacturing World-Class Goods Design and Development of Products and Processes 2
Claes Gefvenberg Document control applications - Be very wary about designing your own Document Control Systems, Procedures, Forms and Templates 4
F 8.2.1 Customer Satisfaction - Designing & Building a Solid waste disposal facility ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 36
O Need documentation - Designing a data acquisition system for the enviromental chamber Design and Development of Products and Processes 3
M Why do we call it "Gauge" R&R Quality Tools, Improvement and Analysis 1
CaliperJim Double Ended Thread Plug Gauge Calibration General Measurement Device and Calibration Topics 9
C Pressure Gauge Calibration General Measurement Device and Calibration Topics 3
J Gauge Management - with ambiguous requirements & no support ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
C Gauge R&R Question Using Minitab Software 1
S Calibration Frequency for Slip Gauge Kit used for CMM Calibration? General Measurement Device and Calibration Topics 0
J Gauge Suggestion: Specialty or Custom General Measurement Device and Calibration Topics 1
F Calibrating Taper Sleev/Plug Gauge General Measurement Device and Calibration Topics 0
I How many gauges in a Go/No Go Gauge? General Measurement Device and Calibration Topics 7
J Standard used to determine if check fixture gauge is acceptable Reliability Analysis - Predictions, Testing and Standards 2
R Gauge R&R on pre-set torque wrench Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
C Aluminum galling on thread plug gauge Manufacturing and Related Processes 10
J Gauge R&R on a torque measurement Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
K I’m looking for a square probe for my linear height gauge Manufacturing and Related Processes 1

Similar threads

Top Bottom