SBS - The Best Value in QMS software

DFMEA (Design FMEA) - Plastic Injection Molding

#1
Hi~
I'm the new comer of Cove. :)
Recently i work in a plastic injection company, and responsible to co-ordinate a team to prepare DFMEA when design the mold and prepare Process FMEA. However, before i'm working a OEM company, so i just need to prepare PFMEA and no experience on DFMEA.
Is there anyone who have experience on prepare DFMEA on injecton industry?
Please help...
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Staff member
Admin
#2
A design FMEA is for product use / function so it is somewhat process independent. What is the product?

Also, have you looked through the Design FMEA part of this series of slides?
 
D

D.Scott

#3
kapo01 said:
Hi~
I'm the new comer of Cove. :)
Recently i work in a plastic injection company, and responsible to co-ordinate a team to prepare DFMEA when design the mold and prepare Process FMEA. However, before i'm working a OEM company, so i just need to prepare PFMEA and no experience on DFMEA.
Is there anyone who have experience on prepare DFMEA on injecton industry?
Please help...
Welcome to the Cove.

The first thing you should do is get a copy of the AIAG FMEA Manual (Third Edition). The Design FMEA section certainly would be useful to you. We do DFMEAs for our molds even though we are not design responsible for the part itself. Many times the mold design creates a necessity to change the part design which in turn must be approved by the customer.

You can get a copy of the manual from AIAG. Information can be obtained by calling 01-248-358-3003 or in Europe contact Carwin Continuous at 44-1708-861333.

Dave
 
Thread starter Similar threads Forum Replies Date
B Why the Greek god Hephaestus should have done a design FMEA (DFMEA) on his giant robot APQP and PPAP 1
Marc Definition DFMEA (Design FMEA) - Definition Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
K Determining Effect of Failure without a DFMEA (Design FMEA) FMEA and Control Plans 1
M Severity Reduction in a Design FMEA (DFMEA) FMEA and Control Plans 26
G How to identify Key Characteristics (KC) in a Design FMEA (DFMEA) FMEA and Control Plans 2
R DFMEA (Design FMEA) on Printed Circuit Boards (PCB's) FMEA and Control Plans 2
R Rear Axle Gear Group DFMEA (Design FMEA) - Example wanted FMEA and Control Plans 2
M ISO 14971 Risk Analysis and use of a DFMEA (Design FMEA) ISO 14971 - Medical Device Risk Management 8
Chennaiite DFMEA (Design FMEA) at Vehicle Level - Some inputs needed. FMEA and Control Plans 4
P Design FMEA (DFMEA) Basics - Help needed IATF 16949 - Automotive Quality Systems Standard 3
S DFMEA (Design FMEA) for a New Line Operation of the Underground Operation FMEA and Control Plans 10
T Electronic Assembly Design FMEA (DFMEA) FMEA and Control Plans 6
michellemmm Reverse Engineering a Design FMEA using aerospace DFMEA guidelines FMEA and Control Plans 2
T DFMEA (Design FMEA) - We already have a PFMEA (Process FMEA) FMEA and Control Plans 5
P Design FMEA (DFMEA) required on all products and their parts? Design and Development of Products and Processes 5
R Can a DFMEA (Design FMEA) effectively analyse design modifications? FMEA and Control Plans 12
C DFMEA (Design FMEA) and PFMEA (Process FMEA) - Who should lead? FMEA and Control Plans 14
A DFMEA (Design FMEA) - Occurance and Detection Ratings FMEA and Control Plans 2
B How to fill s/c and c/c in DFMEA (Design FMEA)? Design and Development of Products and Processes 3
S DFMEA - Is a Design FMEA required? FMEA and Control Plans 3
M DFMEA (Design FMEA) for Trailers or any heavy vehicle design Design and Development of Products and Processes 1
N How to Calculate RPN in Design FMEA (DFMEA) vs. Process FMEA (PFMEA) FMEA and Control Plans 9
M When to start a DFMEA (Design FMEA)? APQP and PPAP 2
B What is the meaning of the Occurrence in the DFMEA (Design FMEA)? FMEA and Control Plans 8
R DFMEA (Design FMEA) - Document or Record? Document Control Systems, Procedures, Forms and Templates 3
W DFMEA (Design FMEA) for Bulk Material - Resin for Plastic Injection Moulding FMEA and Control Plans 1
T Ballpoint Pen DFMEA (Design FMEA) FMEA and Control Plans 13
L Special Characteristics in DFMEA (Design FMEA) - Carry over to PFMEA? FMEA and Control Plans 9
Y Design (DFMEA) and Process (PFMEA) FMEA Failure Mode Identification Design and Development of Products and Processes 8
S Control Plan and Design FMEA (DFMEA) Links FMEA and Control Plans 4
P DFMEA - Machinery Design Best Practices FMEA and Control Plans 0
G DFMEA buy-in strategies for Design Engineers APQP and PPAP 22
S DFMEA when the supplier doesn't have design responsibility APQP and PPAP 15
C Design for Assembly in DFMEA - Failure Effect of Sub-System(s) FMEA and Control Plans 5
M DFMEA and its linkage to Design Verification FMEA and Control Plans 1
J Selection Matrix for DFMEA Focus in New Product Design FMEA and Control Plans 7
T DME (design margin evaluation) vs. DFMEA Design and Development of Products and Processes 3
A Commerical off the shelf items (COTS) in DFMEA's (Design FMEAs) FMEA and Control Plans 5
M 7.3.2.2 - Process Design in Remanufacturing - Registration Finding for no DFMEA Design and Development of Products and Processes 8
G Detection Rating in Design FMEAs (DFMEA) FMEA and Control Plans 2
Casana DFMEA Design Control response FMEA and Control Plans 4
OpExPro The note at the bottom of DFMEA occurrence tables in AIAG VDA FMEA FMEA and Control Plans 0
OpExPro AIAG VDA DFMEA Template Required FMEA and Control Plans 2
P Equipment URS, pFMEA and dFMEA ISO 14971 - Medical Device Risk Management 3
R DFMEA/PFMEA mitigation of high severity (9-10) in low volume products IATF 16949 - Automotive Quality Systems Standard 1
J Looking for a training organization that can provide in house DFMEA training FMEA and Control Plans 4
P Understanding DFMEA and PFMEA - Supplier Related IATF 16949 - Automotive Quality Systems Standard 21
DuncanGibbons Best practice for identifying "items" of parts for DFMEA analysis AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
Q Is that any difficulty to do software DFMEA and PFMEA in ISO 13485? ISO 13485:2016 - Medical Device Quality Management Systems 5
M How to complete structure Analysis and Function analysis sections' columns of AIAG-VDA DFMEA form FMEA and Control Plans 0

Similar threads

Top Bottom