Dial Gauge (gage) Calibration Software

P
#1
I am looking for Dial Gauge Calibration software which is QS 9000 certified and can run under windows NT. Any good suggestions will be welcomed.
 
Elsmar Forum Sponsor

Jerry Eldred

Forum Moderator
Super Moderator
#2
I am drawing a blank on that one. My first instinct would be to call a vendor rep (such as a Mitutoyo office, etc.) or sales office for one of the manufacturer's. I am assuming you are referring to what I have normally called dial indicators.

If anyone else has particular experience in this, please feel free to add comments.

------------------
 
Thread starter Similar threads Forum Replies Date
I What is Gauge Capability? Dial Thickness Gage and Digital Vernier Calipers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 17
G Uncertainty Budget Examples for Caliper, Micrometer and Dial Gauge Measurement Uncertainty (MU) 3
N Procedure/calculation for determining the foot pressure of dial thickness gauge General Measurement Device and Calibration Topics 10
A Magnification for One Stage Dial Gauge Mechanism General Measurement Device and Calibration Topics 1
L Calibration of Dial Thickness Gauge - What reference standard need I follow? General Measurement Device and Calibration Topics 5
R Validation of A Procedure for Calibrating Dial Calipers using Traceable Gauge Blocks General Measurement Device and Calibration Topics 6
M Lever type dial gauge - Usage of a dimensional 'test indicator' for measurement General Measurement Device and Calibration Topics 10
N Digital vs Dial Caliper Comparison Measurement Uncertainty (MU) 17
C ISO 9001:2008 Audit Major Finding - Dial Calipers not set to zero ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
E How to perform Discrimination check for Dial Indicator? General Measurement Device and Calibration Topics 2
N Calibration Method of Dial Thermometer Gauges General Measurement Device and Calibration Topics 7
R Pressure Test Dial Gage Selection Quality Tools, Improvement and Analysis 1
S Interpreting the Calibration Report for my Dial Indicator General Measurement Device and Calibration Topics 3
D Calibration of a Dial Indicator only used to indicate 0 General Measurement Device and Calibration Topics 7
W Measuring the Dial Torque of Plastic Insulin Pen devices Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
F What are the Advantages of a Digital Caliper Compared with a Dial Caliper? General Measurement Device and Calibration Topics 8
G Dial Indicator Calibration Frequency - ASME/ANSI B89.1.10M-1987 Calibration Frequency (Interval) 4
J I'm looking for a Thin Drop Dial Indicator Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
U Dial Gages of all types in company flood - How to recover them General Measurement Device and Calibration Topics 6
M Looking for a copy or template of a In House Calibration Report for a Dial Indicator General Measurement Device and Calibration Topics 1
Q Mitutoyo USB Cables for Variables Data Collection using a Dial Snap Gage Statistical Analysis Tools, Techniques and SPC 2
A Dial Test Indicator Repair Procedure General Measurement Device and Calibration Topics 3
C Dial Bore Gage Contact Points leaving witness/burnish marks General Measurement Device and Calibration Topics 10
J Performing Internal Calibrations - Dial gauges, micrometers, height gauges, calipers General Measurement Device and Calibration Topics 8
1 Acceptance criteria and related standard for 1 micron Lever Type dial Indicator General Measurement Device and Calibration Topics 5
Z Dial Test Indicator Flaw General Measurement Device and Calibration Topics 7
A Dial Test Indicator Design & Operation when Approach Angle is Different General Measurement Device and Calibration Topics 5
S Digital Dial Indicator Recommendation General Measurement Device and Calibration Topics 4
N Basic MSA - A simple way to complete an MSA study on Dial Calipers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
Q Dial Indicator Verification Procedure - ANSI/ASME B89.1.10M-2001 General Measurement Device and Calibration Topics 13
D Calibration vs. Verification - Can we calibrate dial indicators in-house? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
apestate Etalon Dial Caliper Gage Information Needed General Measurement Device and Calibration Topics 2
C Verification vs. Calibration of Dial Weight Dynamometer General Measurement Device and Calibration Topics 4
L Best Caliper for Shop Use? Digital vs. Dial Caliper vs. Vernier-type General Measurement Device and Calibration Topics 53
J How to Calibrate a Digimatic Dial Indicator? General Measurement Device and Calibration Topics 5
D ANSI B89.1.10, AGD and Mil A-A-2348 Dial Indicator Standards Various Other Specifications, Standards, and related Requirements 2
T How to calibrate dial indicators, gauges and scales General Measurement Device and Calibration Topics 22
J Dial Caliper or Digital Caliper - Which is the best? General Measurement Device and Calibration Topics 27
C Struggling to teach a co-worker how to read dial calipers, any advice? General Measurement Device and Calibration Topics 13
J Caliper repair procedure - I need a caliper repair procedure for dial calipers General Measurement Device and Calibration Topics 2
C What is the proper method for cleaning dial calipers? General Measurement Device and Calibration Topics 4
apestate Calibrating .001" resolution Dial Calipers - Calibration and safeguarding procedure General Measurement Device and Calibration Topics 6
E What is the smallest graduation (resolution) available for a Dial Test Indicator? General Measurement Device and Calibration Topics 2
Q Calibration Wording for a Dial Indicator WI General Measurement Device and Calibration Topics 1
B How to Calibrate a Dial Indicator General Measurement Device and Calibration Topics 13
J Dial Calipers vs. Digital Calipers - Has anyone replaced all their dial indicators? General Measurement Device and Calibration Topics 5
D Dial Indicator (Analogue) Calibration Work Instructions General Measurement Device and Calibration Topics 3
J Standard used to determine if check fixture gauge is acceptable Reliability Analysis - Predictions, Testing and Standards 2
J Designing new gauge tracking software IATF 16949 - Automotive Quality Systems Standard 4
R Gauge R&R on pre-set torque wrench Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Similar threads


















































Top Bottom