Dielectric Strength of Electroshock - IEC 60601-1

#1
please help me about means of patient protection and test voltage
related to defibrillator device.
main capacitor charge to 1500vDC at 200j.
how much insulation should exist between paddles of defibrillator
and main capacitor? ?mopp ?vrms or DC
Thank you very very much.:confused::confused::confused::confused::confused::confused:
 
Elsmar Forum Sponsor

Peter Selvey

Staff member
Moderator
#2
Have you read IEC 60601-2-4? That standard has a bunch of special requirements for different parts of the defib circuit.

It's not simple any you should be laying out in a block diagram. There are different circuits including the paddles, capacitor bank, ECG monitoring circuits, control circuit and so on.
 
Thread starter Similar threads Forum Replies Date
B IEC 61010-1 - Voltage / Dielectric strength tests IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
A IEC 60601-1 Dielectric Strength test for battery operated devices IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
K Dielectric strength test as per IEC 60601-1 -Infant incubator IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
B Operator protection - When to apply table 7, Dielectric strength test voltage IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
O Is it mandatory for Medical Devices to work properly after dielectric strength tests? IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
B Standard for Dielectric Strength Test IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
E IEC 61010-1 Dielectric strength test of inner power supply Other ISO and International Standards and European Regulations 0
S IEC 60601-1 Electrical safety testing - Dielectric Strength Test - 8.8.3 IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
S Leakage Current test and Dielectric strength for Battery operated ECG device? IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
M HF/RF Generator for dielectric strength IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
P Humidity Pre-Conditioning before leakage current and dielectric strength tests IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
S Input to Ouput Dielectric Strength PSU IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
C INMETRO 350 Dielectric Strength Test to IEC 60601-1 clauses 18, 19 and 20 Other Medical Device Regulations World-Wide 5
S Issues with Dielectric Strength Testing - IEC 60601 IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
R Current Limit in IEC 60601 Dielectric Strength Testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
R Dielectric Strength of Triple Insulated Wire to comply with 2MOPP IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
A Internally Powered Medical Device and Dielectric Strength IEC 60601 - Medical Electrical Equipment Safety Standards Series 17
J Production Line Test Brasil - High Voltage Dielectric Strenght Test Other Medical Device Regulations World-Wide 5
T Tests IEC 60601-1 - Grounding Resistance, Leakage Current and Dielectric Rigidity in an automated way IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
B Dielectric Test of Battery Powered Medical Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
J Transformer Compliance Testing, overheat then humidity treat, then dielectric test? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
R Dielectric Test for Ambulatory ECG Medical Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
I Dielectric Test for HF Surgical Equipment (IEC 60601-2-2 clause 201.8.5.1.2) IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
D IEC 60601-2-37 - No Dielectric testing specifications? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
P Average Peel Strength - Interpretation of BS EN 868-5:2018 and ASTM F0088/F0088M Other Medical Device Related Standards 2
M Testing Tensile Strength of Materials AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
P Test Method Validation for Tensile Strength Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
A Tensile Strength Testing of Rubber Underwear Manufacturing and Related Processes 2
D What is your Sterile Medical Device Pouch Peel Strength Spec? Other Medical Device Related Standards 3
N Strength verification of surgical instruments ISO 13485:2016 - Medical Device Quality Management Systems 5
A Capability Analysis for Packaging Seal Strength with spec. >0.1 Kgf using Minitab Using Minitab Software 6
D Hot Plate Welded Plastic Strength Validation Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S GRR (Gage Repeatability and Reproducibility) for Material Strength Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
triathlonx13 Rubber - Tear and Adhesion Strength Peel Cross Head Speed Design and Development of Products and Processes 3
R How to Inspect the Weld Strength of High Pressure Vessel & Oil Pipe Line Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
E Laser Marking effects on the Fatigue Strength of Alloys CE Marking (Conformité Européene) / CB Scheme 6
B Management Tool - Does each of them have their STRENGTH and WEAKNESSES? Misc. Quality Assurance and Business Systems Related Topics 10
A Sample Size Selection for Peel Strength for Variable Data using a 95%/99% Confidence Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
7 Data Analysis of Tensile Strength Test - Graphical Presentation of Results Statistical Analysis Tools, Techniques and SPC 2
B Laser Weld Strength - Laser Welding Medical Instruments Reliability Analysis - Predictions, Testing and Standards 8
G Tensile Strength Distribution - Why a Weibull distribution is used? Reliability Analysis - Predictions, Testing and Standards 6
J Flexural Strength Testing - Analytical Laboratory recommendations for Testing Alumina Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
7 SPC Monitoring for Pouches Manufactured Last Year - Tensile Strength Statistical Analysis Tools, Techniques and SPC 8
M HSLA100 (High Strength Low Alloy Steel) Welding Procedure and Consumables Manufacturing and Related Processes 3
D ESD Quantification - Standalone instrument that can log ESD field strength ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
N ISO 34: Rubber, vulcanized or thermoplastic - Determination of tear strength Other ISO and International Standards and European Regulations 1
H Testing the Durability and Strength of Copper Wire Manufacturing and Related Processes 2
M ASTM F88 Standard Test Method for Seal Strength - Designation F88-09/M88-09 ver 15.1 Reliability Analysis - Predictions, Testing and Standards 5
Q COAs for 21 CFR 111 - Identity, Purity, Strength - Dietary Supplement Industry US Food and Drug Administration (FDA) 4
G Definition ASTM D624 - Test Method for Tear Strength of Vulc. Rubber & Thermo. Elastomers Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 1

Similar threads

Top Bottom