Dimensional Inspection Procedure - Sample wanted

H

haripachan

#1
I have to write a dimensional inspection plan of a component. The component has 10 specified dimensions and baseline reference is the drawing(print).

Each dimension has been identified with measurement tool. It may be a conventional instrument, like Outside micrometer or CMM.

Including a plan with measurment tool like micrometer is quite clear, where in I can mention the range, accuracy and least count of the instrument and number of readings to be taken etc.... but in case of CMM, its complicated(like to include referencing details, features involved etc).

Can I get a sample plan where in all my doubts get cleared.

Please help:)
 
Elsmar Forum Sponsor

Jim Wynne

Leader
Admin
#2
Re: Sample dimensional inspection procedure

I have to write a dimensional inspection plan of a component. The component has 10 specified dimensions and baseline reference is the drawing(print).

Each dimension has been identified with measurement tool. It may be a conventional instrument, like Outside micrometer or CMM.

Including a plan with measurment tool like micrometer is quite clear, where in I can mention the range, accuracy and least count of the instrument and number of readings to be taken etc.... but in case of CMM, its complicated(like to include referencing details, features involved etc).

Can I get a sample plan where in all my doubts get cleared.

Please help:)
I don't know of a sample inspection plan that includes the information you're looking for, but I'm not sure you need one. Work with the CMM programmer/operator in developing and validating a program for measurement of the features in question, then reference the program in your inspection plan, including any necessary setup instructions.
 
H

Hodgepodge

#3
Re: Sample dimensional inspection procedure

I have to write a dimensional inspection plan of a component. The component has 10 specified dimensions and baseline reference is the drawing(print).

...but in case of CMM, its complicated(like to include referencing details, features involved etc).

Can I get a sample plan where in all my doubts get cleared.
Keep it simple. I've attached an instructional Detailed Inspection Plan to show how such a plan could be put together. Hover over the cells with a red marker to view the instructional comment. Each drawing characteristic and the method for inspecting each characteristic must be listed on the plan. When "CMM" is listed as the Method of Inspection, list the program number used to verify the characteristic. Some of the instructions are the same as the instructions for using the AS9102 Forms.
 

Attachments

Last edited by a moderator:
Thread starter Similar threads Forum Replies Date
N Dimensional Inspection - Symbology cheat sheet Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Slotted Hole Dimensional Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
P Dimensional Mechanical Inspection only as a Service - ISO17025 or ISO17020 ISO 17025 related Discussions 5
H Dimensional Measurement Uncertainity - Inspection of a component Measurement Uncertainty (MU) 5
K Inspection Dimensional Check Sheets - Over 500 part numbers Document Control Systems, Procedures, Forms and Templates 2
L Acceptance Activities-Dimensional Inspection was missed. Parts already assembled 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 6
K Dimensional Inspection of Molded Plastic Parts in Seoul, Korea Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
I Contract Visual, Basic Dimensional Inspection Services Service Industry Specific Topics 2
A X-Ray for Dimensional Inspection and Scanning for Defects within Polyurethane Foam Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
Q Measurement Uncertainty (MU) in Dimensional Inspection in a QC Laboratory Measurement Uncertainty (MU) 2
S Dimensional Inspection Technique for a small Silicone Part Inspection, Prints (Drawings), Testing, Sampling and Related Topics 17
S Layout and Dimensional Inspection Training Training - Internal, External, Online and Distance Learning 0
T General convention used for dimensional inspection - 4x Accuracy? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
J Just accredited!!! CMM Dimensional Inspection Laboratory General Measurement Device and Calibration Topics 8
E Looking for Dimensional Inspection Service Service Industry Specific Topics 15
N Dimensional Inspection Business Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
K COPLANARITY: Composite profile tolerance on multiple surfaces- what does" lower dimensional reference frame tolerance" control? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
G What information to put on measurement Dimensional Results APQP and PPAP 7
V Recording CMM dimensional results on CFG-1003 APQP and PPAP 3
N How to resolve discrepancies in Level 3 PPAP supplier dimensional reports? APQP and PPAP 11
K Guard-banding and relaxed acceptance for dimensional gauges General Measurement Device and Calibration Topics 1
G Calibration Laboratory Dimensional Temperature Question General Measurement Device and Calibration Topics 2
G Procedure Creation specifically for dimensional (caliper, micrometer, dti) Document Control Systems, Procedures, Forms and Templates 8
G Caliper or Micrometer's Dimensional Flatness General Measurement Device and Calibration Topics 5
G Looking for a Metrology Course preferably Dimensional and Electronics Training - Internal, External, Online and Distance Learning 5
B Is Gage R&R required on a 100% Dimensional Layout? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
W Dimensional Measurement of 10% accuracy and 25% uncertainty standard General Measurement Device and Calibration Topics 6
G Out of Dimensional Tolerance - MRB Audit Issue Nonconformance and Corrective Action 11
T How to report Basic Dimensions on a Dimensional Report (ISIR) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
knightarmourus Initial Samples with dimensional deviation in Serial Production Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
V Ford Dimensional Tag Characteristics requirements APQP and PPAP 2
M How to calculate Cg and Cgk for a 2-Dimensional Area Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
G MSA (Measurement System Analysis) and Dimensional Tolerances Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
B Changing dimensional tolerances to approve rejected product ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
S Dimensional Issues because of the last years FORD Recall Manufacturing and Related Processes 2
T Variable Dimensions / Part of Production / PPAP Dimensional Report Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
W Dimensional Calibration Training Class Training - Internal, External, Online and Distance Learning 2
C Building a Dimensional Metrology Laboratory to Inspect various Physical Measurements General Measurement Device and Calibration Topics 2
J Equipment required for a Dimensional Calibration Laboratory Document Control Systems, Procedures, Forms and Templates 1
C Content of PPAP Dimensional Report APQP and PPAP 8
I Machine Capability Analysis in Multi-Dimensional Cases Capability, Accuracy and Stability - Processes, Machines, etc. 2
O Dimensional Results Requirements for PPAPs APQP and PPAP 6
R Environmental Controls Procedure for Calibration of Dimensional Gages General Measurement Device and Calibration Topics 3
O The Layout of Dimensional Results and What to Provide the Customer APQP and PPAP 16
S Standard Equipment List for Stocking a Dimensional Metrology Laboratory General Measurement Device and Calibration Topics 8
A Criteria for taking Dimensional Measurements of a Painted Hole in a Part Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
R Reference Standard for the Calibration of Dimensional Measuring Tools General Measurement Device and Calibration Topics 2
R Self Calibration of Dimensional Measuring Tools General Measurement Device and Calibration Topics 3
M Design Review/Dimensional Analysis feasibility program or spreadsheet? Design and Development of Products and Processes 1
N Design of Dimensional Measurement Gage for Bolt General Measurement Device and Calibration Topics 13

Similar threads

Top Bottom