DMM Calibrations - ANSI-C39.6 - Use 10%, 50% and 90% of every range

Marc

Hunkered Down for the Duration
Staff member
Admin
#1
Date: Fri, 10 Sep 1999 12:19:58 -0400
From: SERGIO_LOPEZ-CARMONA
Subject: Re: DMM Calibrations

Hello Luiz Fernando:

There is a standard (document) which recommends to use the 10%, 50% and 90% of every range as the key calibration points to be tested in every DMM. The document is ANSI-C39.6 and can be bought in ANSI.

Sergio Lopez-Carmona
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
F DMM - Capacitance - +/- % of reading + digits? Measurement Uncertainty (MU) 3
K Digital vs. Analog Megohmmeter - Analog vs. DMM - Seeking Reviews / Opinions ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
G ISO 9001:2000 Calibration Procedures for DMM/Oscilloscopes/Power Supplies General Measurement Device and Calibration Topics 12
G DMM Ratio Specifications - Uncertainty for the Ratio function of a digital multimeter Measurement Uncertainty (MU) 9
A HP E34401A Digital multimeter - "< 1/5 dmm 24 hour spec" what does this mean? General Measurement Device and Calibration Topics 7
A Resistance (ohm) Electrical Measurements with a DMM - Verify Shunt? General Measurement Device and Calibration Topics 14
M DMM Multimeter - Perform a complete MSA study? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
D Naming of SOP doc's - Specific to Calibrations ISO 13485:2016 - Medical Device Quality Management Systems 2
A Large outside micrometers calibrations General Measurement Device and Calibration Topics 2
S Internal calibrations - Part of an ISO 17025 accredited testing laboratory (Automotive) ISO 17025 related Discussions 3
H Can a calibration lab still use ISO 6789:2003 as guide for torque calibrations Other ISO and International Standards and European Regulations 1
M Vernier Calibrations & more General Measurement Device and Calibration Topics 5
M Calibration Records Requirements for all the Calibrations and Verifications we do General Measurement Device and Calibration Topics 4
K Hexalobe Go/NoGo Gage Calibrations General Measurement Device and Calibration Topics 3
Y Identifying lighting requirements for in house Calibrations General Measurement Device and Calibration Topics 8
C User Measurement Equipment Calibrations In Companies General Measurement Device and Calibration Topics 7
J Appropriate Test Environments for In-Glass Liquid Thermometer Calibrations General Measurement Device and Calibration Topics 2
J Is it possible to train our lab technician to perform balance calibrations? General Measurement Device and Calibration Topics 2
L Is Uncertainty Calculation Mandatory for Field calibrations? General Measurement Device and Calibration Topics 5
M Limited Calibrations - An instrument that will not pass a full calibration, OOT General Measurement Device and Calibration Topics 8
J Performing Internal Calibrations - Dial gauges, micrometers, height gauges, calipers General Measurement Device and Calibration Topics 8
A Quality Audit Advice - Past Due Device Calibrations due to Cal Supplier Issues Quality Manager and Management Related Issues 14
P How to handle Out of Tolerance during Calibrations and exceeded Alert Action Limits Quality Manager and Management Related Issues 4
G Are One-Point ISO 17025 Equipment Calibrations OK ISO 17025 related Discussions 12
D Torque Calibrations - Uncertainty Components Measurement Uncertainty (MU) 3
T Training Employees to Perform Calibrations / Minor Adjustments to Inspection tools Training - Internal, External, Online and Distance Learning 6
L Would like to start in-house calibrations and would like to know requirments General Measurement Device and Calibration Topics 1
J Temperature / Pressure / Vacuum training - In-House Calibrations to save money Training - Internal, External, Online and Distance Learning 13
S MU of Mass & Pressure Calibrations Measurement Uncertainty (MU) 1
D Electrical Calibrations - Uncertainty Components General Measurement Device and Calibration Topics 2
B Room temperature for calibrations on basic equipment like calipers, micrometers, etc. General Measurement Device and Calibration Topics 14
K Subcontracting of Tests and Calibrations - ISO 17025 Sec: 4.5 ISO 17025 related Discussions 11
J Using Outside Accredited Calibration Laboratories vs. In-house Calibrations General Measurement Device and Calibration Topics 10
B Calculating Contributors to MU - Developing MU budgets for in house calibrations Measurement Uncertainty (MU) 7
F Certifying for Calibrations of Network Analyzers - Looking for classes/training General Measurement Device and Calibration Topics 1
A Controlled Environment - Environmental Requirements for calibrations General Measurement Device and Calibration Topics 10
C Bringing Simple Calibrations Back In-House General Measurement Device and Calibration Topics 16
B Request: Procedures for BASIC in-house Calibrations - Small Company General Measurement Device and Calibration Topics 11
J Is it permissible to use data from calibrations as part of a gage R&R? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Jerry Eldred How does your company perform calibrations? General Measurement Device and Calibration Topics 3
Jerry Eldred In-Laboratory Audit of Calibrations General Measurement Device and Calibration Topics 1
A ANSI/AAMI versions of 60601-1-2 and related testing requirements Other Medical Device Related Standards 0
S Is using ANSI/ASQ Z1.4-2008 the correct sampling plan to determine Pass/Fail of Apparel measurements? AQL - Acceptable Quality Level 4
B FAI and ANSI Y14.5 Trailing Zeros and Print Tolerances Manufacturing and Related Processes 3
Nicole Desouza Sampling plan for a customer who wants AQL 1.0 (per ANSI Z1.4) AQL - Acceptable Quality Level 5
Q ASQ/ANSI Z1.4–2003 (R2018) Change Log? Various Other Specifications, Standards, and related Requirements 2
S Medical Device Endotoxin Testing for ANSI/AAMI ST72:2011/2016 Other Medical Device Related Standards 1
Sidney Vianna ANSI acquires full ownership of ANAB - December 2018 ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 0
C AS9100 rev D 8.5.1 c 2 - Defining the Machine in-process frequency per ANSI/ASQ Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
Proud Liberal Surface finish measurement (roughness) - Rz under the ISO standard vs ANSI standard Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0

Similar threads

Top Bottom