Do you control your policies with control numbers?

S

SRivers

#1
Good afternoon All,
My company has been TS certified since 2003 and recently completed one of our bi-anual audits. A question was raised about our TS Policies manual. The policies are not 'controlled' with control numbers. They reflect only the revision date at the top of the form. The auditor asked why we didn't control the policies. As you can imagine, all of us had that 'deer in the head lights look', silently asking ourselves why don't we? Is it a requirement that they be controlled? Do we consider them living documents? No one knew! So, my question to you fine folks is this...." Do your policies have to be controlled with control numbers?" Before I assign control numbers to all those policies I want to make sure this guy just isn't yanking our chain because 'he' feels they should be. :eek:
Thanks for all your replies ahead of time!
Susan
Laurinburg NC

"Action without philosopy is a lethal weapon; Philosophy without action is worthless." ~ Soichiro Honda
 
Last edited by a moderator:
Elsmar Forum Sponsor
B

Boscoeee

#2
Good afternoon All,
My company has been TS certified since 2003 and recently completed one of our bi-anual audits. A question was raised about our TS Policies manual. The policies are not 'controlled' with control numbers. They reflect only the revision date at the top of the form. The auditor asked why we didn't control the policies. As you can imagine, all of us had that 'deer in the head lights look', silently asking ourselves why don't we? Is it a requirement that they be controlled? Do we consider them living documents? No one knew! So, my question to you fine folks is this...." Do your policies have to be controlled with control numbers?" Before I assign control numbers to all those policies I want to make sure this guy just isn't yanking our chain because 'he' feels they should be. :eek:
Thanks for all your replies ahead of time!
Susan
Laurinburg NC

"Action without philosopy is a lethal weapon; Philosophy without action is worthless." ~ Soichiro Honda
IMHO - The Standard does not require you to have "control numbers"

Having said that I have found it useful to number my procedures and work instruction in alignment with the Standard they are written to satisfy. This make it easier for employees to find what they are looking for when it comes to instructions and forms. Additionally, it talks to the Auditor's frame of reference as well.

I am sure others will comments.:D
 
#3
Susan:

Don't do anything. Why is it that this is the first time this has come up since 2003? The requirements haven't changed!

Is your auditor saying it isn't working? Is there any evidence of ineffective controls?

Sounds like a chain yanking ( as you put it!)
 

ScottK

Not out of the crisis
Staff member
Super Moderator
#4
what Andy said.
It's been fine for 5 years, why is there an issue now?

was this a new auditor to your organization?
We all know different auditors have different "interpretations" of different standards.
 
#5
As Ralph indicated, there is no requirement in the Technical Specification about control numbers. You would have to check to see if your own documentation puts that requirement there.

But not having control numbers is a totally different thing than not being controlled. In order for a document to be controlled, it must meet the requirements of 4.2.3 a-g. Well, actually your document controll procedure must ensure the document meets those points. If, through your procedure, your policies (which are not required either, btw) are controlled, then there should be no problem.......

Unless, however, your document control procedure states that all controlled documents will be identified with a control number.
 

Wes Bucey

Quite Involved in Discussions
#6
Good afternoon All,
My company has been TS certified since 2003 and recently completed one of our bi-anual audits. A question was raised about our TS Policies manual. The policies are not 'controlled' with control numbers. They reflect only the revision date at the top of the form. The auditor asked why we didn't control the policies. As you can imagine, all of us had that 'deer in the head lights look', silently asking ourselves why don't we? Is it a requirement that they be controlled? Do we consider them living documents? No one knew! So, my question to you fine folks is this...." Do your policies have to be controlled with control numbers?" Before I assign control numbers to all those policies I want to make sure this guy just isn't yanking our chain because 'he' feels they should be. :eek:
Thanks for all your replies ahead of time!
Susan
Laurinburg NC

"Action without philosopy is a lethal weapon; Philosophy without action is worthless." ~ Soichiro Honda
One of the most often used phrases around the Cove when discussing auditor "rulings, observations, NC, OFI, etc." will be
"Show me the shall!"
[a citation to a specific clause in the Standard being audited which applies to the situation]
which is the demand/command an auditee should ALWAYS make to the auditor who presents a "requirement" unfamiliar to the auditee.

The second part of that demand is
"What will you expect from us to cure this and when?"
[if the citation to the Standard is verified and you agree to the auditor's interpretation.]

The final part of this little drama is WHEN should the interchange between auditor and auditee take place? -
ANSWER: Ideally, before the auditor leaves your building.

On Topic: I don't know of any clause in either TS 16949 or ISO 9001:2000 which would be applicable to this statement by your auditor. It appears to me the auditor may have a radically different definition of "control"as it applies to the Standard than my own definition or that of most quality professionals I know. As part of my questioning of the original auditor, I'd ask for a written definition of "control" as he thinks it applies to meeting the Standard.
 

Coury Ferguson

Moderator here to help
Staff member
Super Moderator
#7
I agree with everyone that has posted the response that: "The auditor is pulling your chains."

I would also like to add to Wes's post: There is no requirement in AS9100 either. I can't say it also applies to ISO13485, but most likely it doesn't.
 
S

SRivers

#8
Thanks Everyone for your replys. They solidified my thoughts on the matter. This was a new auditor for us and I have to say that it was a totally different style than we had seen in any past audit. There was no evident rhyme or reason to his scattered audit. We ended up with two minors on the TS side and one minor on the ISO side. All in all, not too shabby. OH! He made a comment that kind of suprised me. He stated that one of the minors on the TS side should actually be a room for improvement BUT he couldn't write room for improvements on the TS side...only the ISO side. We've had many auditors give us room for improvements on the TS side in the past. Was this dude correct? Is a room for improvement not allowed on the TS side? Strange. But like I said earlier, this guy was different than anything we had seen before and I am very new to the whole TS/ISO management rep role. It's gonna be a fun ride. lol Have a wonderful day everyone!
Susan:thanx::beerdive:
 
#9
Susan

What's the 'ISO side' and 'TS side' your auditor is referring to? Specific requiements of TS compared to the 'general' requirements of ISO 9001?

TS is TS, the auditor should treat them all equally, surely?
 
S

SRivers

#10
Hi Andy,
My company makes both automotive and off road clutch/clutch component parts for Honda. The audits usually are seperate for those two sections. The automotive parts are subject to the TS/ISO standards but the ATV sections are only subject to the ISO portion. We are also ISO 14000 but thankfully I do not have my hands in that one. Wheww!
Susan
 
Thread starter Similar threads Forum Replies Date
G Making everyone follow documentation (document control) policies Document Control Systems, Procedures, Forms and Templates 24
D Control Number for Class III and IV devices Canada Medical Device Regulations 0
J Document Control Metrics Document Control Systems, Procedures, Forms and Templates 3
I Document Control Software Document Control Systems, Procedures, Forms and Templates 2
T Controlling Expandable Forms in Paper-Based Document Control System Document Control Systems, Procedures, Forms and Templates 10
N ISO 13485 7.3.9 Change control in medical device software ISO 13485:2016 - Medical Device Quality Management Systems 6
C UDI Questions on Control Units Other US Medical Device Regulations 6
A Quality Control Datasheets Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
M Control-self assessment Internal Auditing 5
GreatNate Master Control QMS software Quality Tools, Improvement and Analysis 0
A Prototype control plan FMEA and Control Plans 2
J Records Control - Does each individual record need to be numbered? Records and Data - Quality, Legal and Other Evidence 2
shimonv Document Control Procedure Header Content Document Control Systems, Procedures, Forms and Templates 3
W FMEA - Current control and occurrence rating FMEA and Control Plans 3
S Which department should prepare the control plan? could you show me a standard regarding to this matter. FMEA and Control Plans 17
G Control Plan & PFMEA Review Procedure? FMEA and Control Plans 1
N What are the software audit and control steps Reliability Analysis - Predictions, Testing and Standards 2
A Fabric roll inspection - What type of Control Chart to use? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
C Monitoring and Control Instruments RoHS, REACH, ELV, IMDS and Restricted Substances 3
M ISO14971:2019 - Verification of implementation and effectiveness of risk control ISO 14971 - Medical Device Risk Management 3
T Risks arising from control measures vs. ineffective control measures ISO 14971 - Medical Device Risk Management 11
J Need Change Control Yes/No Decision Tree Template ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
P IQ, OQ, PQ protocol, and report templates for Distributed Control Systems in Pharmaceutical Manufacturing Systems. Qualification and Validation (including 21 CFR Part 11) 0
R Risk control measures as per ISO 14971 ISO 14971 - Medical Device Risk Management 6
T Linking Control Plans and PFMEA's FMEA and Control Plans 3
L How to add exemption or statement to control of document procedure? ISO 13485:2016 - Medical Device Quality Management Systems 5
T PFMEA and Control Plans on legacy product FMEA and Control Plans 5
P IATF 16949 requirement - error-proofing in control plan IATF 16949 - Automotive Quality Systems Standard 3
C 8.5.1.1 Control of Equipment, Tools, and Software Programs - Questions about the extent of control of NC programs AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
Q Version/Revision Control of CAD files Document Control Systems, Procedures, Forms and Templates 2
earl62 What is the best way to control special characteristics in Control plan? Is it Mandatory to have SPC for IATF 16949? IATF 16949 - Automotive Quality Systems Standard 12
I Control Plan (Product/Process specification/ Tolerance) acceptance FMEA and Control Plans 27
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 7
Z Putting back excluded rows/data points in a control chart Using Minitab Software 0
J Control Plan use on the manufacturing floor FMEA and Control Plans 4
E Change in control plan - Do I have to do sampling? IATF 16949 - Automotive Quality Systems Standard 1
D All Dimensions listed on control plan FMEA and Control Plans 10
W Need for current design or process control FMEA and Control Plans 2
Q ISO 9001 8.5.1 - Control of production and service performance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
A What is the difference between Design Process, Process Design and Design Control? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
A Beginners help with ISO3951-2 Combined control s-method n>5 what is Phi ?? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
C Corrective action for failure in documents control ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
B Control chart and sample time Statistical Analysis Tools, Techniques and SPC 1
DuncanGibbons Manufacturing Plan vs Material Specification vs Control Plan Manufacturing and Related Processes 5
J Control chart for huge sample size Statistical Analysis Tools, Techniques and SPC 9
K Contamination Control - Class Is medical devices (Clause 6.4.2 ISO 13485:2016 (E)) ISO 13485:2016 - Medical Device Quality Management Systems 12
J 510(k) for a control kit for an external IVD test kit 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
T Assessing Hazard-Related Use Scenarios where control measures exist through standards IEC 62366 - Medical Device Usability Engineering 32
adir88 Documenting Risk Control Option Analysis ISO 14971 - Medical Device Risk Management 8
T Design Control Procedures later in the Development Process ISO 13485:2016 - Medical Device Quality Management Systems 6

Similar threads

Top Bottom