Does anybody know how to get older versions of Minitab to work in Windows 10?

Bill Levinson

Industrial Statistician and Trainer
#1
I have not been able to run Minitab 16 since I installed Windows 10. It says it cannot retrieve the license information, even though I have a license for the software. Also, Windows 10 gives me the message that the app cannot run because it may cause security or performance issues in Windows.
 
Elsmar Forum Sponsor

AMIT BALLAL

Super Moderator
#3
Check whether windows-10 supports Minitab-16 or not.
If not, you can use VirtulBox (virtual machine) to install windows-7 or any other version of windows (you can also install other OS supporting Minitab-16) and then install Minitab16 on it.
 

optomist1

A Sea of Statistics
Super Moderator
#10
and a peripheral word of caution; there are limits to re: the conversion of old MT files and conversion to new or later releases, i.e MT 16 to MT 19
 
Thread starter Similar threads Forum Replies Date
I Does anybody use Detection in medical device Design FMEA? ISO 14971 - Medical Device Risk Management 25
L Does anybody have quiz's available? ISO 13485:2016 Training Material Training - Internal, External, Online and Distance Learning 2
A Does anybody know in which Standard can this attached Alarm Symbol be found? Other Medical Device Related Standards 3
A Does Anybody use APIS (IQ-FMEA) Software in this forum? FMEA and Control Plans 2
Y Does anybody have any knowledge in Statistical Bin Limit (SBL)? Statistical Analysis Tools, Techniques and SPC 2
T Does anybody know about EN45014? (Replaced by ISO/IEC 17050-1) Other Medical Device Related Standards 1
M Does Anybody have an ISO 22000 internal audit checklist for sharing? Internal Auditing 11
Stijloor Does anybody get a job from listings in the Cove? Career and Occupation Discussions 18
W Preventive 5S - Does anybody have any idea about Preventive 5S? Preventive Action and Continuous Improvement 1
M When is a system not a single device? Does anybody know of a guidance document? ISO 13485:2016 - Medical Device Quality Management Systems 11
A IC: 5.15 vs 6.00 sigma - Does anybody here use 5.15 sigma for MSA calculations? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
R Iso/tc69/sc4/wg6n48 - Does anybody here know captioned standard? Statistical Analysis Tools, Techniques and SPC 3
J Does anybody have an audit checklist focused on Manufacturing processes? Manufacturing and Related Processes 8
J Does anybody can give a help about GR&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
J Does anybody can give me a help about the calcuation about no defect on 6 sigma level Six Sigma 3
S Does anybody have any idea about EAQF94 standards? IATF 16949 - Automotive Quality Systems Standard 2
W FPS (Ford production system) - Does anybody have any interesting comments? Customer and Company Specific Requirements 8
N Blueprint reading training - Does anybody have any recommendations? Training - Internal, External, Online and Distance Learning 6
A Does anybody have any information about the Firestone tire problem? Nonconformance and Corrective Action 18
A Does anybody have an audit check list for ISO/IEC 17025 to replace ISO/IEC Guide 25 ISO 17025 related Discussions 14
T What does VW mean by annual requalification? Customer and Company Specific Requirements 1
I Does BSI require suppliers to be ISO 9001 Certified? EU Medical Device Regulations 12
Watchcat Does Regulatory Affairs put the "no" in innovation? Other US Medical Device Regulations 14
Q Does anyone know what this call out means? Manufacturing and Related Processes 3
K COPLANARITY: Composite profile tolerance on multiple surfaces- what does" lower dimensional reference frame tolerance" control? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
P Does FDA require certification for quality system internal audit for auditor? Qualification and Validation (including 21 CFR Part 11) 1
H Does anyone has feedback on a notified body for small companies? EU Medical Device Regulations 3
M Does 4.5 - Alternative RISK CONTROL apply to the Particular Standards? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
E Does IVD need to integrate with hospital IT infrastructure? Medical Information Technology, Medical Software and Health Informatics 2
D What does a level 1 (PSW) PPAP actually promise? APQP and PPAP 16
R GS1 DataMatrix code does not meet GS1 Specification EU Medical Device Regulations 0
M Does the scope of ISO 9001:2015 applies to tenders, pricing and sales department of a medical devices distributor? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
K Why does load cell supplier requires force verification General Measurement Device and Calibration Topics 3
M Does C=0 strictly mean 1 bad, all bad, all the time? ISO 13485:2016 - Medical Device Quality Management Systems 6
C Does a medical device active (zinc oxide) needs BPR registration in EU? Other ISO and International Standards and European Regulations 5
D Does Risk Management apply to re-labeler (MDR) EU Medical Device Regulations 1
Ed Panek Does this FDA Requirement Apply to international (not USA) distributors for USA based manufacturing companies? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 0
S Does anyone have a checklist to prepare for ISO 13485, Stage I audit? ISO 13485:2016 - Medical Device Quality Management Systems 3
S Does a refurbished product required a new UDI? US Food and Drug Administration (FDA) 3
D Change to labelling - does it require a new 510(k)? US Food and Drug Administration (FDA) 5
M What does "constantly" mean ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
N Does anyone use SGS for ISO 13485 / CE certification Registrars and Notified Bodies 0
G Does FDA allows remote approvals of quality documentation. Is there any specific guidance on signing any quality records remotely? Document Control Systems, Procedures, Forms and Templates 1
B Does FDA Registration QSR need to cover non-medical devices for contract repackager? US Food and Drug Administration (FDA) 1
lanley liao Does all of the suppliers need to integrated into the supplier list qualified of the company? Oil and Gas Industry Standards and Regulations 2
0 To which part of 13485 does this refer? ISO 13485:2016 - Medical Device Quality Management Systems 3
A Medical Device Contract Manufacturer - Does the CM need to register with FDA? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
J Records Control - Does each individual record need to be numbered? Records and Data - Quality, Legal and Other Evidence 2
lanley liao Does the customer`s trademark belong to customer-supplied property? Oil and Gas Industry Standards and Regulations 2
H How does a gas turbine work on diesel fuel? Oil and Gas Industry Standards and Regulations 12

Similar threads

Top Bottom