Doing MSA Variables Data Study on Threads

B

Black arrow

#1
Hello,

Do anyone has some experience of MSA variable study on threads? What measuring equipment was used?

Thanks in advanced!
 
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#2
Re: MSA Variable-threads

Screw threads? What kind of variables study is done on screw threads? Generally speaking, the MSA should be done with whatever is being used for measurement in production. If you could give us more information we can give better advice.
 
B

Black arrow

#3
Re: MSA Variable-threads

Hi,

We have been asked to temporary manufacture parts with internal threads and we should verify the pitch diameter with our CMM.
 

Jim Wynne

Staff member
Admin
#4
Re: MSA Variable-threads

Hi,

We have been asked to temporary manufacture parts with internal threads and we should verify the pitch diameter with our CMM.
You could possibily verify the minor diameter of internal threads with a CMM, but I don't know why you would want to. Usually pin gages will suffice for that. There's no way I know of to measure the pitch diameter with a CMM.
 
Thread starter Similar threads Forum Replies Date
D Do I need part variation while doing Destructive Variable Gage R&R MSA study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
Q Doing an MSA on a Climatic Chamber Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
M Requirement to complete an MSA when doing Comparative Tests Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
G Dealing with Excessive Within-Part Variation when doing MSA and Cpk studies Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
Courier MSA Tools - Excel templates for doing the Linearity & Bias, & Stability Studies Excel .xls Spreadsheet Templates and Tools 13
A MSA (Measurement Systems Analysis) - Is MSA worth doing? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
qualprod What do CB´s change when doing a partial moving ? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
M What to be careful about/focus on when doing a Technical File review EU Medical Device Regulations 4
K The correct way of doing a 2 Sample T test Reliability Analysis - Predictions, Testing and Standards 7
V CE Mark under MDD or IVDR - IVD company doing Virtual Manufacturing Other Medical Device Regulations World-Wide 3
Sidney Vianna Are the Accreditation Bodies doing their job? Keeping CB's accountable Registrars and Notified Bodies 0
GreatNate QMS in SharePoint - Is anyone doing this? Manufacturing and Related Processes 10
D Doing both a top-down and a bottom-up risk assessment - How to combine ISO 14971 - Medical Device Risk Management 13
A True purpose of doing EST (Electrical Safety Test) on medical device Other Medical Device Related Standards 3
supadrai d/b/a doing business as and the FDA US Food and Drug Administration (FDA) 1
Raffy What is the first step in doing PIA (Privacy Impact Assessment)? IEC 27001 - Information Security Management Systems (ISMS) 3
I AS9100D - Interview Request - I'm doing research Misc. Quality Assurance and Business Systems Related Topics 1
N Explanation - Quality means doing it right when no one is looking ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
R CMDCAS and dba's (Doing Business As) Canada Medical Device Regulations 2
Sidney Vianna As a profession we, auditors, are not doing enough - Simon Feary speech Registrars and Notified Bodies 36
D Are we doing enough to meet Identification and Traceability 7.5.3 Requirements? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
S Who is doing BGA cross sectional analysis in assembled PCBA in INDIA? Reliability Analysis - Predictions, Testing and Standards 1
G Thoughts on Audit Finding for not doing Gage R and R for Visual Inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
AnaMariaVR2 What the Internet is Doing to Our Brains Coffee Break and Water Cooler Discussions 5
J Doing a "yearly" mass calibration of gages over the weekend. Any advice? General Measurement Device and Calibration Topics 4
P Root Cause for not doing Management Review ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
P Testing Standards - Regulatory agency doing Enforcement Testing of Medical Devices EU Medical Device Regulations 5
T DOE Multi level Taguchi - I am doing a Capstone Project Using Minitab Software 10
M To find the Optimum Parameter Setting using Minitab (Doing DOEs) Using Minitab Software 18
O NET-INSPECT is it worth it? Small Machine Shop doing AS9100 Quality Manager and Management Related Issues 8
R First Pass Yield - Am I doing correct the First Pass Yield Metric Quality Tools, Improvement and Analysis 2
P Environmental Aspects and Impacts while doing Software Development ISO 14001:2015 Specific Discussions 6
L Must Calibration Labs have IEC 17025 before doing Calibration Jobs for Customers ISO 17025 related Discussions 13
F Regulatory Affairs Certification (RAC) April/May EU Exam - Anyone doing it? Professional Certifications and Degrees 10
D Is anyone familiar with doing a DVI (Dossier de Validation Industrielle) for Snecma AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
E Should FDA implement 3rd party (PMAs) reviews? What are the pros and cons of doing so Other US Medical Device Regulations 2
Q Methods for doing Production Process Risk Analysis ISO 14971 - Medical Device Risk Management 4
V Help doing 6sigma Green Belt Professional Certifications and Degrees 6
Anerol C What activities are you doing daily as QMS Coordinator? Career and Occupation Discussions 3
C Setting Up Part Masters in ERP Systems - How are others doing it? Document Control Systems, Procedures, Forms and Templates 1
C Handling Repeated Non-Conformities when doing Layered Process Audits Process Audits and Layered Process Audits 11
A MR (Management Representative) also doing Internal Audits? Internal Auditing 27
J Registrars Doing Synchronized (Combined) Audits to AS9100 and ISO 13485 Registrars and Notified Bodies 8
C Volkswagen Quality System - Is Volkswagen doing anything different? Customer and Company Specific Requirements 1
Marc What are Toyota's idled U.S. workers doing? World News 4
M FOC (3 lots) - First of Code - Are you still doing 3 lots for FOC? Other Medical Device and Orthopedic Related Topics 1
D Greening of Standard Specifications - What is your company/ organization doing Sustainability, Green Initiatives and Ecology 10
S Please tell me how to start doing an FMEA FMEA and Control Plans 6
D Currently doing battle with IT - IT Help Desk procedure wanted Service Industry Specific Topics 5
B 'Doing Quality' - But calling it something else Quality Manager and Management Related Issues 12

Similar threads

Top Bottom