Domain of the component (EASA CM No.: CM-SWCEH-001 Issue 01 Revision 02) Point 9.3.3 (Usage domain aspects)

#1
Hi. I read the document (EASA CM No.: CM-SWCEH-001 Issue 01 Revision 02) and I do not understand the point 9.3.3 (Usage domain aspects). what is understood for "domain of the component" Thank you
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
Q Is a Domain Registrar a Critical Supplier? ISO 13485:2016 - Medical Device Quality Management Systems 11
F Seeking Internship/Co-op Opportunities in Regulatory Affairs/QA/Clinical Domain (USA) Career and Occupation Discussions 4
Wesley Richardson Domain Name Registrars and Hosting Services Solutions After Work and Weekend Discussion Topics 5
Le Chiffre Domain name registrar scam? After Work and Weekend Discussion Topics 7
V Process, component or full product re-qualification: leaded to unleaded solder Qualification and Validation (including 21 CFR Part 11) 7
J Traceability of component parts - Bolts, screws and washers ISO 13485:2016 - Medical Device Quality Management Systems 3
R When does the FDA consider a component a medical device? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 17
G Control Plan - Include the processes for each sub component? APQP and PPAP 2
J What is the minimum standard for automotive component traceability? Manufacturing and Related Processes 2
M Informational US FDA – URGENT/11 Cybersecurity Vulnerabilities in a Widely-Used Third-Party Software Component May Introduce Risks During Use of Certain Medical Dev Medical Device and FDA Regulations and Standards News 0
D Standard guide for shelf life determination of non sterile component with degradation materials Reliability Analysis - Predictions, Testing and Standards 1
F Component Molding and Over-molding - Handling Resin Inventory Manufacturing and Related Processes 2
S REF and CE mark symbols on multi-component device EU Medical Device Regulations 3
J EC REP information and CE Mark - Component of a system that is not a medical device EU Medical Device Regulations 2
R IMDS for double sourced component RoHS, REACH, ELV, IMDS and Restricted Substances 3
C PCBA Hardware Component different failure types - How to rate detection? FMEA and Control Plans 8
N FDA Traceability Requirements - Component lots ISO 13485:2016 - Medical Device Quality Management Systems 2
P Electronic component failure analysis turnaround time Reliability Analysis - Predictions, Testing and Standards 0
S Medical Device Supplier Component Qualification Service Industry Specific Topics 0
A Is a Manufacturing Process Sheet required for each Component? Manufacturing and Related Processes 4
R 21 CFR Part 820 Contract Manufacturer of Medical Device Component 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
D Design FMEA for a component - Should I make the following assumptions? FMEA and Control Plans 7
I Medical device manufacturer and component supplier miscommunication Other Medical Device Related Standards 5
M Methods of reducing/eliminating the systematic component of error General Measurement Device and Calibration Topics 0
B Non Applications in ISO 13485:2016 for component contract manufacturers ISO 13485:2016 - Medical Device Quality Management Systems 2
S The difference between a Medical Device Accessory and Component Canada Medical Device Regulations 2
R Determining Sample Size for Medical Device Component Validation Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
K Biocompatibility Testing - Component Level or Assembled Medical Device? ISO 13485:2016 - Medical Device Quality Management Systems 7
S Who compiles the Critical Component List, Insulation Diagram etc.? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
MDD_QNA What is the function of the Critical Component List? ISO 14971 - Medical Device Risk Management 2
M Cleanliness and Contamination question (Medical Device Component Manufacturer) ISO 13485:2016 - Medical Device Quality Management Systems 2
M Component Manufacturer of Food Stuffs Mfg. Equipment Parts - Eat Drink Policy ISO 13485:2016 - Medical Device Quality Management Systems 1
E Updating DHF (Design History File) to include Alternative Component 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
S ISO 13485 Definitions - Medical Device Component Supplier ISO 13485:2016 - Medical Device Quality Management Systems 4
M ISO 13485:2016 - IQ/OQ Requirements applicable to Electronic Component Suppliers ISO 13485:2016 - Medical Device Quality Management Systems 4
MDD_QNA Medical Device PCB component change IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
R Is pre-conditioning supplier component before incoming inspection tests allowed? Quality Manager and Management Related Issues 16
M Component Lot Number Traceability - Class I reusable and "resposable" Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 10
R USB power between Medical Device Data Collection Device Component IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
O What is the definition of d.c component in standard IEC 60601-2-10? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Who's name should be on component certification? Other ISO and International Standards and European Regulations 2
R RoHS Compliance Problem with One Component RoHS, REACH, ELV, IMDS and Restricted Substances 5
J Biocompatibility Evaluation component other than Testing Other Medical Device Regulations World-Wide 1
alonFAI Component Failure (Relay) during ICT Testing after Surface Mount Assembly Manufacturing and Related Processes 5
V AQL for Component Level and Assembled Finished Product AQL - Acceptable Quality Level 1
alonFAI Solderability test and component's life expectency Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
R ERAI - Counterfeit Component Database (Listed on page 39 of AS5553A) AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
O Changes to Component Parts within an Assembly AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
B IEC 60825-1 Kit Component Requirement questions Other ISO and International Standards and European Regulations 2
M Molded Component Color Tolerance Specification Manufacturing and Related Processes 6
Similar threads


















































Top Bottom