Doubt about the element 15.3 (VDA) - Periodic cross-check and repeated inspections

M

Mayala

#1
Hello,

I have a doubt about the paragraph:

"In order to fulfill the obligation to show due care and attention, periodic cross-check and repeated inspections and test must be performed".

I do not understand the requirement for this paragraph. Could you help me?

Regards
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
Unfortunately, I haven't worked with the VDA document in over a year and do not even have a recent copy - so I can't help.
 
R

Roger Eastin

#3
For these incoming materials, you must show that you (the receiver of the incoming products) periodically check the supplier's product for important characteristics. This shows that you are not just taking their "word for it". Set up a periodic inspection plan based on what you think would allow a good cross-check and document it.
 
Thread starter Similar threads Forum Replies Date
K Doubt on insulation class of a device IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
T ISO 14971-2019 doubt - Evaluate if estimated risks are acceptable ISO 14971 - Medical Device Risk Management 9
A Doubt on multiple inspection carrying out for same balloon number during Stage Inspection and Final Inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M Doubt about Customer Changes to Product Design Features AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
N Doubt on Bias study for EOLT (End Of Line Tester) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
P Doubt about MSA for Attributes Gaging - Reference Value Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
K Standard Deviation - Doubt and Clarification of my Understanding Statistical Analysis Tools, Techniques and SPC 28
M Attribute Gage MSA - What is the width of the gray area of ​​doubt? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
S Is TS16949 a standard by itself? A basic doubt IATF 16949 - Automotive Quality Systems Standard 5
V Mandatory to send to the Customers FMEA in a PPAP level 3 - Doubt IATF 16949 - Automotive Quality Systems Standard 36
V MSA (Measurement System Analysis) Doubt on Analytic Method (Attribute Study) IATF 16949 - Automotive Quality Systems Standard 8
Z Doubt about the Location of Car GPS Navigators Funny Stuff - Jokes and Humour 13
A Doubt on "MSA 3rd Linearity Example.xls" formula Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S Doubt on Thread Measurement - Measuring Fluted (Odd) Taps for its pitch diameter Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
Marc Future of APQP and PPAP in Doubt? 2005 Update APQP and PPAP 26
N Infant radiant warmer - Heater Quartz Element type Other Medical Device Related Standards 0
S Cost of Poor Quality (CoPQ) - Scrap element of calculation includes lost margin? Misc. Quality Assurance and Business Systems Related Topics 7
A IEC 60601-1 cl.15.4.2.1 - Tubular Heating Element (Protection against Overheating) IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
S How does each element of OHSAS contribute to management of work place safety & health Occupational Health & Safety Management Standards 7
S Should there be a SME (Subject Matter Expert) for each element? Training - Internal, External, Online and Distance Learning 3
F ISO/TS 16949 - Definition Clause, sub clause, section, element IATF 16949 - Automotive Quality Systems Standard 8
somashekar Design as a Purchased Element in QMS ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 21
I Component Evaluation - Relevant Element of the Standard? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
Q How to Audit ISO 14001 Element 4.5.2: Evaluation of Compliances ISO 14001:2015 Specific Discussions 4
I IEC 62304:2006 Definitions - Software System, a Software Element and Software Unit IEC 62304 - Medical Device Software Life Cycle Processes 13
D Found Watch - Watch is "Element" and says "New York" Coffee Break and Water Cooler Discussions 16
A What is the difference between an ISO Section vs. ISO Element? ISO 13485:2016 - Medical Device Quality Management Systems 10
I Does a QMS defined by the element-by-element approach meet the intent of 4.1a? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 15
P Corporate Social Responsibility as an essential element to sustain a business Other ISO and International Standards and European Regulations 19
G "Prevent Pollution" element of Policy Statement Miscellaneous Environmental Standards and EMS Related Discussions 6
J Print asking for Straightness of 0.013 and it has a note "Any Radial Element" Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
A "Element of" in ISO 14001:2004 (3.6 - environmental aspect)? ISO 14001:2015 Specific Discussions 4
W Internal Auditing - Processs Audit vs. Element Audit - ISO 9001 Process Audits and Layered Process Audits 6
K How do I audit the Design Element of ISO 9001 including Verification and Validation? General Auditing Discussions 3
ccochran Laboratory Testing as a "Special Process" - element 7.5.2 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
J Reference Element for a Coordinate Measuring Machine General Measurement Device and Calibration Topics 3
A Queries about Element no 5.5.1 and 7.5.2 - Designation of "Authority" Design and Development of Products and Processes 11
B Audit by Element vs. Audit by Process Process Audits and Layered Process Audits 12
B Purchasing Element Audit Checklist to audit against ISO 9001 Document Control Systems, Procedures, Forms and Templates 6
Jen Kirley New Element Found! Governmentium (Gv) Funny Stuff - Jokes and Humour 1
D Newest element discovered: "Governmentium" Funny Stuff - Jokes and Humour 4
L Link to an example of a full 19 element PPAP example - Seeking APQP and PPAP 5
D ISO/TS Element Responsibility Matrix IATF 16949 - Automotive Quality Systems Standard 4
J Finite Element Analysis (FEA) - Preventive Action? Preventive Action and Continuous Improvement 18
C How to exclusion element 6.2.2.1, 7.5.1.8 of TS2 requirements? IATF 16949 - Automotive Quality Systems Standard 7
R Process Audit vs. Element Audit - The auditor focused on 13 different processes. Process Audits and Layered Process Audits 5
J Servicing element - Servicing of the automobile or the production of service parts QS-9000 - American Automotive Manufacturers Standard 3
J Do I have to write a procedure for every element in QS-9000? QS-9000 - American Automotive Manufacturers Standard 13
T Element 4.5 - Hand written correction to a controlled component drawing? QS-9000 - American Automotive Manufacturers Standard 1
Q What element from QS that is no longer in TS? IATF 16949 - Automotive Quality Systems Standard 1

Similar threads

Top Bottom