Doubts about SPC taken in Machining - Part has +-0.01 Tolerance

#1
I have doubt on spc taking in cnc machine.part have tol +-0.01
when running part on cnc target value was set.after produced 8 or 10 parts insert gets wear out..evalute proceess need to produced 40 nos.
In spc studies offset given in cnc is correct or wrong..if offset given means what action taken in spc
 
Elsmar Forum Sponsor

Eredhel

Quality Manager
#2
Did the machinist make any tool offset wear adjustments for insert wear? Or are you saying the insert is worn so bad it has to be indexed/replaced after just 8 or so parts?
 
#3
the machinist make tool offset wear adjustments for insert wear.so how can take a cp,cpk,pp,ppk, for the process.tool wear offset negligible or considerable when taking SPC data.

in machine capabality index(cpm) also tool wear considerable or not
 

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#6
the machinist make tool offset wear adjustments for insert wear.so how can take a cp,cpk,pp,ppk, for the process.tool wear offset negligible or considerable when taking SPC data.

in machine capabality index(cpm) also tool wear considerable or not
Cp, Cpk, Pp and Ppk do not apply to tool wear. They only apply to normal distributions with a target in the center of the tolerance. Tool wear is non-normal IF controlled correctly - which is allowing tool wear to a control limit, and THEN adjusting. If you "run to the mean" you are overadjusting! More details are in the blog - including the correct way to control for tool wear and calculate capability.
 
Thread starter Similar threads Forum Replies Date
A Some doubts about traditional 510(k) submission US Food and Drug Administration (FDA) 5
R Endless doubts and questions concerning procedure vs process. Process Maps, Process Mapping and Turtle Diagrams 22
qualprod Auditing Product and Services doubts ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
E Doubts about the FCC regulations for the use of Bluetooth in medical equipment Other Medical Device Related Standards 3
B Selling Medical devices to Iran - OFAC doubts Other Medical Device Regulations World-Wide 6
thisby_ Intended Use vs. Intended Purpose vs. Intended by the Manufacturer - Doubts ISO 13485:2016 - Medical Device Quality Management Systems 9
I 6.2.2.1 Product Design Skill - Doubts - No Product Design Responsibility Design and Development of Products and Processes 3
I ISO 9001 - Exclusions Doubts - Placement consultancy services ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
A I have two doubts about PFMEA failure modes - How should I describe a "failure mode" FMEA and Control Plans 24
S MDD class IIa Annex V or VI: specific doubts when implented ISO 13485:2016 - Medical Device Quality Management Systems 6
earl62 What is the best way to control special characteristics in Control plan? Is it Mandatory to have SPC for IATF 16949? IATF 16949 - Automotive Quality Systems Standard 6
J SPC - Stamping parts - Small batch size Statistical Analysis Tools, Techniques and SPC 6
T Attributes SPC study - Attributive control (Go gage) Statistical Analysis Tools, Techniques and SPC 5
S Anyone Familiar with "SPC for Excel" add-in? Lean in Manufacturing and Service Industries 4
G Assignable cause/corrective action list for SPC Software Statistical Analysis Tools, Techniques and SPC 3
H SPC for special characteristics - CSR - Control of SC and CC Statistical Analysis Tools, Techniques and SPC 1
J Determining SPC tolerance Statistical Analysis Tools, Techniques and SPC 21
L SPC - Methods to collect data IATF 16949 - Automotive Quality Systems Standard 7
Marc Steve Prevette's Statistical Process Control (SPC) "Library" Statistical Analysis Tools, Techniques and SPC 0
A SPC for Eddy Current Testing Statistical Analysis Tools, Techniques and SPC 28
S SPC (Statistical Process Control) for Unilateral Tolerance - Questions Statistical Analysis Tools, Techniques and SPC 6
Proud Liberal Informational Use of Classical SPC in Precision Machining Statistical Analysis Tools, Techniques and SPC 9
J Recommendations on Inspection/SPC Software Statistical Analysis Tools, Techniques and SPC 4
Q Real Time Electronic SPC/Control Charting Statistical Analysis Tools, Techniques and SPC 4
Rameshwar25 Other types of Control Charts described in Chapter II of SPC Manual Statistical Analysis Tools, Techniques and SPC 6
A Electric terminal crimping machines - Is SPC appropriate for this process? Manufacturing and Related Processes 4
J Properly understanding SPC - Newbie SPC questions Statistical Analysis Tools, Techniques and SPC 29
bobdoering SPC Charting frequency calculator for X hi/lo chart Imported Legacy Blogs 0
bobdoering Handy training tip for SPC - the Check Engine Light Analogy Statistical Analysis Tools, Techniques and SPC 0
QMMike SPC Software for MAC computers Statistical Analysis Tools, Techniques and SPC 2
Marc SPC based Dashboards - By Steve Prevette (November 2017) Statistical Analysis Tools, Techniques and SPC 1
H SPC Work Instructions (WI) Statistical Analysis Tools, Techniques and SPC 2
A Short Term vs. Long Term SPC Study - Where is Cp and Cpk Defined Statistical Analysis Tools, Techniques and SPC 8
E SPC for Dummies - The correct meaning of all the graphs Statistical Analysis Tools, Techniques and SPC 3
Tagin Can/should SPC be applied to Computer Assembly and Software Imaging? Statistical Analysis Tools, Techniques and SPC 8
P Recommendations on SPC Software or Excel SPC add-in(s) Quality Assurance and Compliance Software Tools and Solutions 6
A Not all characteristics follow a Normal Distribution - How do you do SPC Chart Capability, Accuracy and Stability - Processes, Machines, etc. 5
T SPC in Insurance Back Office Operations Service Industry Specific Topics 4
C SPC for Particulate Alert/Action Levels Statistical Analysis Tools, Techniques and SPC 3
E SPC Production - Getting Cpk and Ppk Statistical Analysis Tools, Techniques and SPC 8
M SPC with many data points from one dimension Statistical Analysis Tools, Techniques and SPC 16
Q Mixed data collection (SPC) for different mold cavities Statistical Analysis Tools, Techniques and SPC 2
M How to Start SPC from the ground up! Statistical Analysis Tools, Techniques and SPC 8
bobdoering Available SPC and Metrology Consultants Paid Consulting, Training and Services 0
I SPC on Cyclic Data Statistical Analysis Tools, Techniques and SPC 10
S SPC Card for One Sample Size - Customer requires for all critical dimensions Statistical Analysis Tools, Techniques and SPC 8
R Quality Management & SPC Manufacturing and Related Processes 1
B Is SPC data For Special Characteristics always required? TS 16949 clause 8.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
S How to Start SPC in a Shaft Grinding Section Statistical Analysis Tools, Techniques and SPC 1
A I-MR SPC used for Inspection Statistical Analysis Tools, Techniques and SPC 7

Similar threads

Top Bottom