Dr. Wheeler on "How Measurement Error Affects the Four Ways We Use Data"

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#1
Dr. Wheeler writes on the effects of measurement error and how understanding probable error and the intraclass correlation coefficient (ICC) makes it possible to quantify measurement uncertainty.

Check out the article here.
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
Miner Dr. Wheeler's series on Data Snooping (aka Data Mining) Statistical Analysis Tools, Techniques and SPC 1
S GR&R by MSA Rules vs. Wheeler & Lyday's EMP Method Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
bobdoering Dr. Wheeler article: What About p-Charts? - When should we use the specialty charts Statistical Analysis Tools, Techniques and SPC 2
P Analysis of the figures from Dr Wheeler's 'Short Run SPC' Using Minitab Software 3
bobdoering Dr. Wheeler: Myths About Process Behavior Charts Statistical Analysis Tools, Techniques and SPC 3
bobdoering Dr Wheeler gives his thoughts on "Estimating the Fraction Nonconforming" Capability, Accuracy and Stability - Processes, Machines, etc. 0
bobdoering Dr. Wheeler is back with his thoughts on MSA and Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Chennaiite Hero Honda No More - The Two-Wheeler Dominated Market World News 1
B Wheeler Honest Gauge R&R macro wanted Excel .xls Spreadsheet Templates and Tools 2
R Is TS 16949 applicable to Two Wheeler manufacturing companies? IATF 16949 - Automotive Quality Systems Standard 4
S Gage R&R - Wheeler's use of 0.675 x Sigma (equip. Var.) as the "Probable Error" Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
bobdoering Dr Wheeler pokes at the Theorem of Large Numbers Statistical Analysis Tools, Techniques and SPC 2
bobdoering Quick Overview of SPC Scaling Factors from Wheeler Statistical Analysis Tools, Techniques and SPC 0
bobdoering Dr Wheeler weighs in on "Individual Charts Done Right and Wrong" Statistical Analysis Tools, Techniques and SPC 2
M An Honest Gauge R&R Analysis - Proposed usage of Donald Wheeler Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
bobdoering Wheeler is back again! He says it is the last volley! Statistical Analysis Tools, Techniques and SPC 7
bobdoering Wheeler's back - Railing against Transformations Statistical Analysis Tools, Techniques and SPC 7
Miner Intro to MSA of Continuous Data – Part 7: R&R using Wheeler’s Honest Gage Study Imported Legacy Blogs 17
bobdoering Dr. Wheeler takes a shot at Normal-centrics Statistical Analysis Tools, Techniques and SPC 1
P A collection of Dr. Wheeler's Articles from SPC Toolkit column of Quality Digest Statistical Analysis Tools, Techniques and SPC 3
P Dr. Wheeler's not using p-chart for countable events? Statistical Analysis Tools, Techniques and SPC 5
Miner Don Wheeler article on MSA - Good Data, Bad Data and Process Behavior Charts Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
S Can a "Two Wheeler" Manufacturer Supplier Register? IATF 16949 - Automotive Quality Systems Standard 7
M Measurement Uncertainty in Optical Microscopy Measurement Uncertainty (MU) 1
B ISO 6508 and portable hardness measurement instruments General Measurement Device and Calibration Topics 0
C How to Establish the Calibration & Measurement Capability (CMC)? ISO 17025 related Discussions 1
Ron Rompen Measurement of residual magnetism General Measurement Device and Calibration Topics 2
M Surgical angle measurement guide device with an application software Medical Device and FDA Regulations and Standards News 1
M Disabling measurement data during fault conditions IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
J Most versatile measurement device General Measurement Device and Calibration Topics 2
P Surface scratch measurement General Measurement Device and Calibration Topics 1
N Drawing tolerance vs. Measurement device General Measurement Device and Calibration Topics 7
Ron Rompen MSA on automated measurement system - Multiple Step Vision System Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
P Thermo-Hygrometer - Measurement of 10DegC @10%RH ISO 17025 related Discussions 4
hogheavenfarm GDT Flatness measurement question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
K Software Validation for Measurement Tools used in Process Validation ISO 13485:2016 - Medical Device Quality Management Systems 2
K Best Measurement Systems Demos in California? General Measurement Device and Calibration Topics 1
M Measurement Error - How to determine what is acceptable? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K Process Mapping - Inputs/Outputs/Detail Activities/Control points/Measurement? Process Maps, Process Mapping and Turtle Diagrams 4
B IEC 60601-2-10 - Accuracy of Pulse Parameters - Required Measurement Uncertainty IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
N Program or application for standard time measurement in industry from video surveillance? Human Factors and Ergonomics in Engineering 1
M Defining frequency of measurement tools callibration Calibration and Metrology Software and Hardware 3
T How to “validate/qualify” a new measurement equipment? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
Bev D Verification and Validation of Measurement Systems Misc. Quality Assurance and Business Systems Related Topics 0
F How do you add accuracies for tools with different measurement devices? General Measurement Device and Calibration Topics 1
M Viable count Measurement ISO Standard Other Medical Device Related Standards 1
J Gauge R&R on a torque measurement Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
W Air Quality Measurement Hardware and Software General Measurement Device and Calibration Topics 11
O Dimension Measurement Tool Recommendation General Measurement Device and Calibration Topics 21
G Does pitch/increment/resolution of a ruled scale apply to measurement uncertainty as line item? Measurement Uncertainty (MU) 10

Similar threads

Top Bottom