DVP&R (Design Verification Plan and Report) for Vehicle Labels?

T

TinaFoster

#1
Hello Forum!
I need assistance. I am a SQE for interior parts and I was recently given Labels that go on the exterior. These labels are put on the vehicle independant from a supplied part. The labels are printed then put on durring general assembly. My question, does anyone PPAP these? If so, would someone like to share thier DVP with me? I really need assistance with tracking down the testing requirments for durrablity, etc. The Labels in question are Engine VIN, Anti-theft, Fuel Grade, Certification, Tire Pressure (on b-pillar above stricker) etc. Each one of these should have a seperate DVP but I need a place to start. Thanks in Advance!

-Tina
 
Elsmar Forum Sponsor
R

Reality99

#3
Re: DVP&R for Vehicle Labels?

I don't have a list or a program how to PPAP a label, but answering the question is it needed? I will say YES.
Maybe you heard about Toyota making a recall about labels with no correct tire pressure information. They placed the wrong one, I think it was the Sienna. Not sure if it was supplier or assy plant fault.
The other case was with my former employer. We shipped labels and then we found out that in the some cars in Middle East (Asia), the ink of our labels was melting down. All because we weren't PPAP'd by customer in these labels, so no addecuate care was sought with this ink.
 
T

tomvehoski

#4
Re: DVP&R for Vehicle Labels?

I worked with a label supplier years ago that did PPAP the same types of labels, but I don't have anything concrete to provide you. They also did drug labels and packaging, so their standards were incredibly high - you don't want a 6 looking like an 8 causing someone to overdose.

You need to look at the drawings and related specifications to determine what the requirements are. There should be adhesion, chemical resistance, UV resistance, abrasion or other things called out that can be tested.
 
Thread starter Similar threads Forum Replies Date
N Test plan of Design Validation Plan and Report (DVP & R) Design and Development of Products and Processes 7
Marc DVP&R Design Validation Plan and Report - A Ford, GM and Chrysler thing Design and Development of Products and Processes 2
Stijloor DFMEA & DVP&R Training Providers FMEA and Control Plans 1
L Who should prepare DVP for components? Our suppliers or our product engineering? APQP and PPAP 8
T Can I consider Reliability Test Plan part of the DVP&R, or the other way round Reliability Analysis - Predictions, Testing and Standards 3
L VW and GM DVP&R form needed APQP and PPAP 9
F Who pays for DVP? Subcontractors or Tier 1 Supplier? APQP and PPAP 1
X Design stage overview (Product specification) EU Medical Device Regulations 3
gohyl Fixture Setup Design Manufacturing and Related Processes 3
D IS0 13485 - Design perspective to regulatory requirement. ISO 13485:2016 - Medical Device Quality Management Systems 2
T Software item classification and Detailed Design IEC 62304 - Medical Device Software Life Cycle Processes 4
armani 7.1.5 and design and development of product ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
Sidney Vianna ISO 9001 News ISO 9001 Design Specification to be developed - May 2022 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
C Design output vs acceptance criteria ISO 13485:2016 - Medical Device Quality Management Systems 8
M Design Control Procedure Medical Device and FDA Regulations and Standards News 4
lisap Design falling outside ISO scope Misc. Quality Assurance and Business Systems Related Topics 11
S Link Between Essential Performance Requirements and Essential Design Outputs 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
G Calculating Ppk for Design Verification - Variable Sampling Design and Development of Products and Processes 15
G How many Design FMEAs do you have? FMEA and Control Plans 4
G Updating FMEAs after Design Updates FMEA and Control Plans 4
Stoic Details of Operational Qualification (OQ) test design for plastic extrusion processes, effect of material property noise, and GHTF/SG3/N99-10 US Medical Device Regulations 2
H R&D and Design procedures - can one procedure cover both activities Design and Development of Products and Processes 6
J Design Verification Testing and Statistics Reliability Analysis - Predictions, Testing and Standards 3
K Can I make an exclusion of Design and Development in ISO 13485:2016 if my product is not regulated ISO 13485:2016 - Medical Device Quality Management Systems 12
S Audit Finding - Design History File (DHF) Index: few (3 to 4) reports not identified ISO 13485:2016 - Medical Device Quality Management Systems 3
S Is the Design Service Provider required to be ISO 13485 certified? ISO 13485:2016 - Medical Device Quality Management Systems 13
M How to show the effect of the failure mode on the manufacturing process as a customer of product design process? FMEA and Control Plans 3
C MDR - Annex II _3. DESIGN AND MANUFACTURING INFORMATION_a EU Medical Device Regulations 3
C Items used for Design Verification Design and Development of Products and Processes 7
S Software design document NMPA guidance and consultant China Medical Device Regulations 4
L Corrective and Preventive Actions aligned to design related defects. After Work and Weekend Discussion Topics 5
E DESIGN VALIDATION, USABILITY AND CLINICAL EVALUATION request Medical Device and FDA Regulations and Standards News 0
Watchcat REGULATORY WATCHCAT De Novo Post-Mortem 4 – Design Controls Other US Medical Device Regulations 0
D Finding Optimum Design Parameters using Taguchi method? Using Minitab Software 2
S ISO13485:2016 7.3.9 design and development change ISO 13485:2016 - Medical Device Quality Management Systems 3
J Managing design verification regression testing of design changes Design and Development of Products and Processes 1
K Design History File - Looking for Examples of DHF's. 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
Watchcat Software validation vs design V&V? Other US Medical Device Regulations 27
S Design & Development records for Medical Devices Packaging and Labelling ISO 13485:2016 - Medical Device Quality Management Systems 9
D Using electronic lab notebooks in the design control process ISO 13485:2016 - Medical Device Quality Management Systems 3
L Essential Design Outputs for SAMD 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
T Justification of "Design Excluded" in IATF 16949 Design and Development of Products and Processes 5
H Contract Manufacturer as Design Owner ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 6
B Drawings - Design Rules Inspection, Prints (Drawings), Testing, Sampling and Related Topics 26
R Role of QA during Design and Development of Products and Processes Design and Development of Products and Processes 4
B Design Responsibilities for Mature Acquired Product Lines ISO 13485:2016 - Medical Device Quality Management Systems 3
I RWE Studies and Design Controls US Food and Drug Administration (FDA) 1
G How to record Regulations and Standards as Design Inputs? Design and Development of Products and Processes 15
T Design Traceability - Labelling / Instructions for Use ISO 13485:2016 - Medical Device Quality Management Systems 5
B How to exclude empty rows in full factorial design analysis? Using Minitab Software 0

Similar threads

Top Bottom