Dynamic Control Plan used by Ford Powertrain division

A

abhinav_sj

#1
Please help!!

I need the guidelines/ formats used by Ford Powertrain division for Dynamic Control Planning.

Also What is a Question Log?

What is characteristics matrix?
 
Elsmar Forum Sponsor
T

Teri - 2011

#2
Re: Dynamic Control Plan

Please help!!

I need the guidelines/ formats used by Ford Powertrain division for Dynamic Control Planning.

Also What is a Question Log?

What is characteristics matrix?
Attached is a sample one given to me by our customer.
Not sure about the question log or matrix.
 

Attachments

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#5
My thanks in advance to anyone who can add to this and/or tell us of any changes since 2008.
 

GRP

Involved In Discussions
#6
I need the guidelines/ formats used by Ford Powertrain division for Dynamic Control Planning
Also What is a Question Log?
A Question Log is one of the work elements in the Ford 1997 Dynamic Control Planning (DCP). The DCP team hold meetings and through the log coordinate activities, write questions and concerns which have to be addressed, track progress and record knowledge gained.

There is no standard form for this. The book gives an example of a question log, but clearly states DCP is driven by content and not forms.
 
Thread starter Similar threads Forum Replies Date
M Dynamic Control Plan Draft - need review FMEA and Control Plans 2
B Step by step methodology in Preparation of Dynamic Control Plan (DCP) FMEA and Control Plans 3
K DCP (dynamic control plan) and PFMEA - Effectiveness of the DCP method FMEA and Control Plans 6
Marc Acronym DCP - Dynamic Control Plan - Ford Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 8
W Ford Dynamic Control Plan (DCP) template in Excel .xls Excel .xls Spreadsheet Templates and Tools 14
G Re-numbering or editing Dynamic Stamps in Adobe Acrobat Document Control Systems, Procedures, Forms and Templates 0
T MSE for dynamic balance measurement? Manufacturing and Related Processes 1
E MSA Study on MTS dynamic rate measurements Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
O Determination of Test Cycles of Dynamic Forces (IEC 60601) IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
Marc NHTSA - Crash imminent braking and dynamic brake support to its New Car Assessment World News 1
S Is a Dynamic Controlled Form acceptable per 21CFR820 Document Control Systems, Procedures, Forms and Templates 3
T Ballooning/Bubbling PDF drawings - My Dynamic Stamp AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 29
W IR Camera - Heat Survey of parts during dynamic testing General Measurement Device and Calibration Topics 5
S Predicate Device Test Results - ASTM F1717 Static and Dynamic Testing 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
I Controlled Dynamic Forms vs. Fixed Forms US Food and Drug Administration (FDA) 3
Jim Wynne An interesting antivirus experience - A "dynamic" test After Work and Weekend Discussion Topics 14
B Dynamic Torque Transducers: Calibration or Verification? General Measurement Device and Calibration Topics 1
D Control Number for Class III and IV devices Canada Medical Device Regulations 0
J Document Control Metrics Document Control Systems, Procedures, Forms and Templates 3
I Document Control Software Document Control Systems, Procedures, Forms and Templates 2
T Controlling Expandable Forms in Paper-Based Document Control System Document Control Systems, Procedures, Forms and Templates 10
N ISO 13485 7.3.9 Change control in medical device software ISO 13485:2016 - Medical Device Quality Management Systems 6
C UDI Questions on Control Units Other US Medical Device Regulations 6
A Quality Control Datasheets Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
M Control-self assessment Internal Auditing 5
GreatNate Master Control QMS software Quality Tools, Improvement and Analysis 0
A Prototype control plan FMEA and Control Plans 2
J Records Control - Does each individual record need to be numbered? Records and Data - Quality, Legal and Other Evidence 2
shimonv Document Control Procedure Header Content Document Control Systems, Procedures, Forms and Templates 3
W FMEA - Current control and occurrence rating FMEA and Control Plans 3
S Which department should prepare the control plan? could you show me a standard regarding to this matter. FMEA and Control Plans 17
G Control Plan & PFMEA Review Procedure? FMEA and Control Plans 1
N What are the software audit and control steps Reliability Analysis - Predictions, Testing and Standards 2
A Fabric roll inspection - What type of Control Chart to use? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
C Monitoring and Control Instruments RoHS, REACH, ELV, IMDS and Restricted Substances 3
M ISO14971:2019 - Verification of implementation and effectiveness of risk control ISO 14971 - Medical Device Risk Management 3
T Risks arising from control measures vs. ineffective control measures ISO 14971 - Medical Device Risk Management 11
J Need Change Control Yes/No Decision Tree Template ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
P IQ, OQ, PQ protocol, and report templates for Distributed Control Systems in Pharmaceutical Manufacturing Systems. Qualification and Validation (including 21 CFR Part 11) 0
R Risk control measures as per ISO 14971 ISO 14971 - Medical Device Risk Management 6
T Linking Control Plans and PFMEA's FMEA and Control Plans 3
L How to add exemption or statement to control of document procedure? ISO 13485:2016 - Medical Device Quality Management Systems 5
T PFMEA and Control Plans on legacy product FMEA and Control Plans 5
P IATF 16949 requirement - error-proofing in control plan IATF 16949 - Automotive Quality Systems Standard 3
C 8.5.1.1 Control of Equipment, Tools, and Software Programs - Questions about the extent of control of NC programs AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
Q Version/Revision Control of CAD files Document Control Systems, Procedures, Forms and Templates 2
earl62 What is the best way to control special characteristics in Control plan? Is it Mandatory to have SPC for IATF 16949? IATF 16949 - Automotive Quality Systems Standard 12
I Control Plan (Product/Process specification/ Tolerance) acceptance FMEA and Control Plans 27
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 7
Z Putting back excluded rows/data points in a control chart Using Minitab Software 0

Similar threads

Top Bottom