Electronic Coordinate Determination System

  • Thread starter SHIVAPRASAD N S
  • Start date
S

SHIVAPRASAD N S

#1
This is a requirement which we are willing to own to our industry. I want to know the details of this measuring System. Can you help me in giving a write up to understand this. Also I would like to know people who deals this item.


Dear Friends,

Thanks for your support. It seems discussion is deviating my original requirement.

As asked by you all I am giving you some more information on my requirement of "Electronic Coordinate Determination System"

1) This is actually a 8 mts shell where in we are welding the nozzels on to it. We need to check & confirm that the welded nozzels are in line or not. Pl look into the attachment for the drawing. Example :- Nozzel CR-2 must be in line to Nozzel CRH-2. This check has to be done at site.
2) Another one is 8 mts Shell where in we need to check the positional accurecy of the holes. Pl look into the attachment for the drawings.


Thanks & Regards

Shivaprasad N S
 
Last edited by a moderator:
Elsmar Forum Sponsor
B

bgudauskas

#2
I think you might be referring to a coordinate measuring machine (CMM). A Google search will yield much information. The wording could also imply electronic gaging too. I guess we'd need more information.

This is a requirement which we are willing to own to our industry. I want to know the details of this measuring System. Can you help me in giving a write up to understand this. Also I would like to know people who deals this item.
 
Last edited by a moderator:
P

prototyper

#3
This is a requirement which we are willing to own to our industry. I want to know the details of this measuring System. Can you help me in giving a write up to understand this. Also I would like to know people who deals this item.
What is it you want to measure?
 
T

True Position

#4
This is a requirement which we are willing to own to our industry. I want to know the details of this measuring System. Can you help me in giving a write up to understand this. Also I would like to know people who deals this item.
Here's a wikipedia link:
http://en.wikipedia.org/wiki/Coordinate-measuring_machine

The largest manufacturers are:
Mitutoyo
Brown and Sharpe
Zeiss

My personal opinion is that Zeiss makes the best machines. I've run all of the above 3 and find the Calypso software superior. Brown and Sharpe's PC-DMIS software is more popular though. Also, if your customer uses a particular machine, it can be very advantageous to have the same one if you don't have a particular preference.
 

Stijloor

Staff member
Super Moderator
#5
Here's a wikipedia link:
http://en.wikipedia.org/wiki/Coordinate-measuring_machine

The largest manufacturers are:
Mitutoyo
Brown and Sharpe
Zeiss

My personal opinion is that Zeiss makes the best machines. I've run all of the above 3 and find the Calypso software superior. Brown and Sharpe's PC-DMIS software is more popular though. Also, if your customer uses a particular machine, it can be very advantageous to have the same one if you don't have a particular preference.
Hi True Position!

:topic:

I like your tag line...:agree1:

However, the title of the new GD&T Standard is ASME Y14.5-2009. The famous "m" has also been removed...:D

Stijloor.
 
T

True Position

#6
Hi True Position!

:topic:

I like your tag line...:agree1:

However, the title of the new GD&T Standard is ASME Y14.5-2009. The famous "m" has also been removed...:D

Stijloor.
Really? Well, I don't have the updated standard anyway. I guess I'll revert to the 1994 version.
 
T

True Position

#8
Naah, you should go with the updated version. Lots of fun.. ;)

Stijloor.
When my customers start using it. For now most drawings I get are still at the 1994 standard. Also, I luckily rarely deal with free form surfaces so I get to avoid frustrating profile tolerances.
 

Stijloor

Staff member
Super Moderator
#9
When my customers start using it. For now most drawings I get are still at the 1994 standard. Also, I luckily rarely deal with free form surfaces so I get to avoid frustrating profile tolerances.
Good points! I still teach my GD&T Clients the 1994 version, but I am preparing for the new standard. "Fear not" I would say because there are still "engineering" drawings produced per obsolete standards, bastardized versions or even worse, no standard at all. I am sure you've seen it all.

Stijloor.
 
T

True Position

#10
Good points! I still teach my GD&T Clients the 1994 version, but I am preparing for the new standard. "Fear not" I would say because there are still "engineering" drawings produced per obsolete standards, bastardized versions or even worse, no standard at all. I am sure you've seen it all.

Stijloor.
This forum would be a good place to get some examples of 'What not to do' for your training classes. Make someone's problem your opportunity!
 
Thread starter Similar threads Forum Replies Date
A Electronic forms QMS Document Control Systems, Procedures, Forms and Templates 7
S Reporting REACH - Electronic components distributor REACH and RoHS Conversations 5
K ISO 13485 and compliance of electronic signature ISO 13485:2016 - Medical Device Quality Management Systems 5
M MDR - eIFU - When you can supply an electronic IFU instead of a paper IFU EU Medical Device Regulations 5
D Advice on capturing electronic signatures ISO 13485:2016 - Medical Device Quality Management Systems 8
C Shelf life electronic components 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
C Cleaning of electronic transmitter Other Medical Device Related Standards 2
D Preservation of Electronic Data / Information Technology ISO 13485:2016 - Medical Device Quality Management Systems 5
M Is IEC 60601-1-2 required by FDA for all electronic medical devices? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
Anonymous16-2 21 CFR Part 11 - Steps to take if we want to validate an electronic system Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
R Electronic and hand-written footnotes for GDP Document Control Systems, Procedures, Forms and Templates 1
A 21 CFR part 11 - section 11.100 - Electronic Signature Certification Other US Medical Device Regulations 6
qualprod From paper to Electronic (records) in the QMS ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
S FDA's E submitter - For clinical electronic thermometer Medical Device and FDA Regulations and Standards News 6
J Integrity of electronic digital records - Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 4
T Electronic ECO/ECR Process - Software recommendations Document Control Systems, Procedures, Forms and Templates 3
M Informational EU – DSVG 03 – Cardiac Implantable Electronic Devices (CIED) – Guidance on the vigilance system for CE-marked medical devices Medical Device and FDA Regulations and Standards News 0
D Benefits of electronic QMS software Software Quality Assurance 5
M Informational US FDA Draft Guidance – Providing Regulatory Submissions for Medical Devices in Electronic Format – Submissions Under Section 745A(b) of the Federal F Medical Device and FDA Regulations and Standards News 0
R Electronic handwritten signatures for approvals - Signed with a Stylus or a Finger Document Control Systems, Procedures, Forms and Templates 2
WEAVER Electronic Weighing Scale Calibration Tolerance Manufacturing and Related Processes 1
S ISO 10993 Biocompatibility Evaluation - Electronic thermometer Other Medical Device Related Standards 3
P FDA inspections and electronic signatures Other US Medical Device Regulations 2
S Need Assistance in Visual Inspection - Tiny electronic components AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
G Looking to move to an electronic QMS software Software Quality Assurance 11
QIE Electronic IFU - new project, need input Other Medical Device and Orthopedic Related Topics 0
U Electronic templates for making paper control charts Reliability Analysis - Predictions, Testing and Standards 2
M Informational USFDA – Radiological Health Regulations; Amendments to Records and Reports for Radiation Emitting Electronic Products; Amendments to Performance Stand Medical Device and FDA Regulations and Standards News 0
P Electronic component failure analysis turnaround time Reliability Analysis - Predictions, Testing and Standards 0
W Part Change Request - Standard (OTS) electronic parts (resistors, capacitors etc.) IATF 16949 - Automotive Quality Systems Standard 3
C In cases where users of an electronic system change their names Qualification and Validation (including 21 CFR Part 11) 6
A How a test flow can be build for a car electronic sunroof control Reliability Analysis - Predictions, Testing and Standards 6
M Electronic signature - name.lastname or equal to handwritten Document Control Systems, Procedures, Forms and Templates 3
N Electronic Instructions for use (eIFU) EU Medical Device Regulations 2
M Electronic Signature - Certificate Qualification and Validation (including 21 CFR Part 11) 8
I GMP 21 CFR Part 11 Electronic Records Compliance Project Help Qualification and Validation (including 21 CFR Part 11) 9
M Medical Device News FDA News - 12-09-18 - MD Submissions to Electronic Format to Improve Efficiency Other US Medical Device Regulations 0
Q Real Time Electronic SPC/Control Charting Statistical Analysis Tools, Techniques and SPC 4
M Suggestions for Electronic Signature Software (FDA 21 CFR Part 11 Compliant) Qualification and Validation (including 21 CFR Part 11) 12
L Inspection Process for Electronic Parts from Brokers Supplier Quality Assurance and other Supplier Issues 1
N How is documentation affected moving to an electronic system? ISO 13485:2016 - Medical Device Quality Management Systems 13
K EQMS question - Implementing an electronic QMS to support ISO 13485:2016 Quality Assurance and Compliance Software Tools and Solutions 4
W ISO 14155 - Electronic clinical data systems - Definition Other Medical Device Related Standards 0
D 21 CFR Part 11 - Electronic Signature Management SOP Other US Medical Device Regulations 0
G Auto electronic signature on Calibration Form ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
S FDA electronic submission gateway (ESG): FAILED eMDR Submission Other US Medical Device Regulations 3
G What's your favourite method of Electronic Folder Filing? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
M How to get an electronic version of IATF 16949:2016 which is Searchable IATF 16949 - Automotive Quality Systems Standard 8
J Quality Testing for Tea, Electronic Noses and Such Manufacturing and Related Processes 5
L Sources for Searching Old Electronic Parts Specs (Counterfeit Inspection) Quality Manager and Management Related Issues 3

Similar threads

Top Bottom