Electronic Templates for making Paper Control Charts

rmf180

Involved In Discussions
#1
Does anyone have electronic templates for making paper control charts? I am looking to print blank control charts for use on the manufacturing floor. It seems that everyone has migrated to electronic SPC. What good is a control chart in your computer unless you have a computer at every manufacturing process???
 
Elsmar Forum Sponsor

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#2
Re: Paper Control Charts

Does anyone have electronic templates for making paper control charts? I am looking to print blank control charts for use on the manufacturing floor. It seems that everyone has migrated to electronic SPC. What good is a control chart in your computer unless you have a computer at every manufacturing process???
Which charts are you looking for?

A correct paper chart is better than any incorrect electronic chart!
 

Ninja

Looking for Reality
Trusted Information Resource
#3
Re: Paper Control Charts

FWIW
We print control charts for use on the messier areas, then update them in the computer every X lots (5-10 depending on history or need). These printed copies can be marked up by hand, then replaced with new printed copies with recalculated control limits based on inclusion of the new data.

Rather than use a "template", we simply use SPC software and a printer...
Rather than post a blank, we use a chart that shows the history and control limits of that product for reference...
 

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#4
Re: Paper Control Charts

There is always scanning to a file, too, to maintain the paper chart history!
 

rmf180

Involved In Discussions
#5
I'm really just looking for charts like are in the AIAG SPC manual with areas to write in the data, calcualte average, x, p, np, etc and plot the point. The problem I've seen with printing a computer generated chart, is that it doesn't facilitate more samples and hand charting.
 
D

dunsie

#9
thank you for the excel template, but all I need is a blank paper P chart where I can hand write info into.
 
Thread starter Similar threads Forum Replies Date
U Electronic templates for making paper control charts Reliability Analysis - Predictions, Testing and Standards 2
K Is implementing Electronic Signatures a Significant Change to the QMS? ISO 13485:2016 - Medical Device Quality Management Systems 10
D Question on electronic signatures and initials on batch records ISO 13485:2016 - Medical Device Quality Management Systems 3
H Electronic care product on patient bed side - Flammability requirements (62368-1) Hospitals, Clinics & other Health Care Providers 0
blackholequasar Price Gouging? (Electronic components) Manufacturing and Related Processes 9
H Prodigit DC Electronic Load - Drawing current but showed 0 on the screeen Manufacturing and Related Processes 0
M Design Control - Management of Electronic CAD files Design and Development of Products and Processes 14
M Correcting Electronic QMS Records AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
A Electronic forms QMS Document Control Systems, Procedures, Forms and Templates 12
S Reporting REACH - Electronic components distributor REACH and RoHS Conversations 5
K ISO 13485 and compliance of electronic signature ISO 13485:2016 - Medical Device Quality Management Systems 5
M MDR - eIFU - When you can supply an electronic IFU instead of a paper IFU EU Medical Device Regulations 6
D Advice on capturing electronic signatures ISO 13485:2016 - Medical Device Quality Management Systems 8
C Shelf life electronic components 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
C Cleaning of electronic transmitter Other Medical Device Related Standards 2
D Preservation of Electronic Data / Information Technology ISO 13485:2016 - Medical Device Quality Management Systems 5
M Is IEC 60601-1-2 required by FDA for all electronic medical devices? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
Anonymous16-2 21 CFR Part 11 - Steps to take if we want to validate an electronic system Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
R Electronic and hand-written footnotes for GDP Document Control Systems, Procedures, Forms and Templates 1
A 21 CFR part 11 - section 11.100 - Electronic Signature Certification Other US Medical Device Regulations 6
qualprod From paper to Electronic (records) in the QMS ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
S FDA's E submitter - For clinical electronic thermometer Medical Device and FDA Regulations and Standards News 6
J Integrity of electronic digital records - Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 4
T Electronic ECO/ECR Process - Software recommendations Document Control Systems, Procedures, Forms and Templates 3
M Informational EU – DSVG 03 – Cardiac Implantable Electronic Devices (CIED) – Guidance on the vigilance system for CE-marked medical devices Medical Device and FDA Regulations and Standards News 0
D Benefits of electronic QMS software Software Quality Assurance 5
M Informational US FDA Draft Guidance – Providing Regulatory Submissions for Medical Devices in Electronic Format – Submissions Under Section 745A(b) of the Federal F Medical Device and FDA Regulations and Standards News 0
R Electronic handwritten signatures for approvals - Signed with a Stylus or a Finger Document Control Systems, Procedures, Forms and Templates 2
WEAVER Electronic Weighing Scale Calibration Tolerance Manufacturing and Related Processes 1
S ISO 10993 Biocompatibility Evaluation - Electronic thermometer Other Medical Device Related Standards 3
P FDA inspections and electronic signatures Other US Medical Device Regulations 2
S Need Assistance in Visual Inspection - Tiny electronic components AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
G Looking to move to an electronic QMS software Software Quality Assurance 11
QIE Electronic IFU - new project, need input Other Medical Device and Orthopedic Related Topics 1
M Informational USFDA – Radiological Health Regulations; Amendments to Records and Reports for Radiation Emitting Electronic Products; Amendments to Performance Stand Medical Device and FDA Regulations and Standards News 0
P Electronic component failure analysis turnaround time Reliability Analysis - Predictions, Testing and Standards 0
W Part Change Request - Standard (OTS) electronic parts (resistors, capacitors etc.) IATF 16949 - Automotive Quality Systems Standard 3
C In cases where users of an electronic system change their names Qualification and Validation (including 21 CFR Part 11) 6
A How a test flow can be build for a car electronic sunroof control Reliability Analysis - Predictions, Testing and Standards 6
M Electronic signature - name.lastname or equal to handwritten Document Control Systems, Procedures, Forms and Templates 3
N Electronic Instructions for use (eIFU) EU Medical Device Regulations 2
M Electronic Signature - Certificate Qualification and Validation (including 21 CFR Part 11) 8
I GMP 21 CFR Part 11 Electronic Records Compliance Project Help Qualification and Validation (including 21 CFR Part 11) 9
M Medical Device News FDA News - 12-09-18 - MD Submissions to Electronic Format to Improve Efficiency Other US Medical Device Regulations 0
Q Real Time Electronic SPC/Control Charting Statistical Analysis Tools, Techniques and SPC 4
M Suggestions for Electronic Signature Software (FDA 21 CFR Part 11 Compliant) Qualification and Validation (including 21 CFR Part 11) 12
L Inspection Process for Electronic Parts from Brokers Supplier Quality Assurance and other Supplier Issues 1
N How is documentation affected moving to an electronic system? ISO 13485:2016 - Medical Device Quality Management Systems 13
K EQMS question - Implementing an electronic QMS to support ISO 13485:2016 Quality Assurance and Compliance Software Tools and Solutions 4
W ISO 14155 - Electronic clinical data systems - Definition Other Medical Device Related Standards 0

Similar threads

Top Bottom