EN 10204 Clause 3.1B - Definition, Summary and Form

RoxaneB

Super Moderator
Super Moderator
#1
Just received an email indicating that we needed to provide a letter indicating that we meet the requirements of EN-10204, 3.1B.

Sooooo.....can anyone out there shed some light on what EN-10204, 3.1B is?

Thanks in advance!
 
Elsmar Forum Sponsor

Al Rosen

Staff member
Super Moderator
#2
RCBeyette said:
Just received an email indicating that we needed to provide a letter indicating that we meet the requirements of EN-10204, 3.1B.

Sooooo.....can anyone out there shed some light on what EN-10204, 3.1B is?

Thanks in advance!
the title of that documenty is
METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS

This may provide a clue to the specific requirement
EN-10204 Certificates.pdf
 

RoxaneB

Super Moderator
Super Moderator
#5
Thanks, Al and Badgerman! Having *finally* reached someone in our QC department, I was told that we have, in the past, added a line to our product certificate indicating the compliance with EN10204 (similar to what was shown in Al's sample).
 
S

skumar

#6
Please be informed that in recent change of EN 10204:2004, the earlier called type 3.1.B certificate in now type 3.1 certificate.

Earlier types 3.1A, 3.1.C and 3.2 are now replaced by 3.2

sandeep-kumar
 
A

alekra

#7
3.1B replaceb by 3.1

skumar said:
Please be informed that in recent change of EN 10204:2004, the earlier called type 3.1.B certificate in now type 3.1 certificate.
That absolutely correct: the 2004 version of the EN 10204 has changed the titles of the certificates... But the information inside them remains the same, at least in the 3.1 type.

The above model can be followed.
 
C

Chrisqa

#8
Howdy!

I am in the same situation: I have been requested to supply a EN 10204 3.1 Certificate and I am looking for additional examples or templates for such a Certificate 3.1 EN 10204.

Any help would be greatly appreciated.

Thanks,

Chris
:)
 
A

alekra

#9
Hi,
You can follow the 3.1 B example given above, the template and format of 3.1 B "outdated" is the same as 3.1 "updated".
 
T

todd wise

#10
the din statement en 10204 3.1.b vs. 3.1

skumar said:
Please be informed that in recent change of EN 10204:2004, the earlier called type 3.1.B certificate in now type 3.1 certificate.

Earlier types 3.1A, 3.1.C and 3.2 are now replaced by 3.2

sandeep-kumar
where is this change information located?
 
Thread starter Similar threads Forum Replies Date
K Inspection Certificate EN 10204 2.1 - Distribution company Other ISO and International Standards and European Regulations 4
T EN 10204 3.1 Inspection Certificate - Machine Shop Various Other Specifications, Standards, and related Requirements 4
J Is there an ISO doc that is similar to DIN EN 10204? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
B QCP (Quality Control Plan) from client with EN 10204 type 3.1 Material Certificates Various Other Specifications, Standards, and related Requirements 2
C Certificate EN 10204 for Elastomer (materials other than metals)? CE Marking (Conformité Européene) / CB Scheme 6
D Is EN 10204 3.1 an Equivalent Standard to 'COD QC 3.1 Rev 7 2009'? CE Marking (Conformité Européene) / CB Scheme 5
L Is En 10204:2004 (e) 3.1 equivalent to ASTM A788? Various Other Specifications, Standards, and related Requirements 4
J Compliance to EN 10204 Type 3.2 Certification Various Other Specifications, Standards, and related Requirements 3
B EN 10204 type 3.1 question - Chinese Steel Mill Certificate Various Other Specifications, Standards, and related Requirements 3
N EN 10204 3.1B Material Certification and Identification Various Other Specifications, Standards, and related Requirements 19
ScottK Is there a US equivalent to BS EN 10204? Various Other Specifications, Standards, and related Requirements 3
M EN 10204 type 2.2 certificate example - Titanium component - Aerospace Industry Various Other Specifications, Standards, and related Requirements 2
ebrahim QMS as per ISO 13485, Clause 4.2 Requirements for regulatory purposes for Medical Devices Authorized Representatives. ISO 13485:2016 - Medical Device Quality Management Systems 3
R AS5553 Clause 3.1.7 f - "Implement a returns process....." AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
C Requirement to link Quality Manual to ISO 9001 clause numbers? ISO 13485:2016 - Medical Device Quality Management Systems 13
V Setup for testing against ISO14708 clause 16 (protection of the patient from herms caused by heat) Other Medical Device Related Standards 0
M IATF16949 Clause 9.1.2.1e - Customer notification related IATF 16949 - Automotive Quality Systems Standard 4
N 60601-2-2 Ed 6 Clause 201.8.8.3.102 - HF instrument leakage IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
R IEC 60601-1 Clause 15.3.2, Push test IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
A ISO 13485 Sterilization Clause Applicability ISO 13485:2016 - Medical Device Quality Management Systems 7
A AS9100D - Clause 8.1 Operation - Coating service company AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
T AS9100D Clause 10.2.1g Supplier Corrective Action for each and every nonconformity? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
H AS9100D clause 8.5.1 f) & 8.5.1 g) - Special Processes AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S ISO 9001 Clause 8.2.3 - Review of the requirements for products and services in a Cafe ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
C ISO/IEC 17021-1 clause 7.1.2 - Determination of competence criteria Document Control Systems, Procedures, Forms and Templates 2
S API Spec. Q1 clause 5.6.1.2 On site evaluation Oil and Gas Industry Standards and Regulations 10
K ISO 13485 clause 8.5.2 'Any necessary CA shall be taken without undue delay' ISO 13485:2016 - Medical Device Quality Management Systems 11
lanley liao How to understand the clause 6 Planning of ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
lanley liao How to understand the term 3.1.21 'Servicing' and the clause 5.7.1.2 'Servicing' of API Spec Q1? Oil and Gas Industry Standards and Regulations 19
earl62 IATF 16949 Clause 9.1.1.1 - What is the batch conformance to specification method? IATF 16949 - Automotive Quality Systems Standard 3
D Layered Process Audits - FCA 9.2.2 - Exemption Clause? IATF 16949 - Automotive Quality Systems Standard 5
T Single Fault Condition IEC 60601 Clause 8.7.1 shorting Cr/Cl in Patient Applied Part IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
J Scope of ISO 9001 clause 10.2 in the product life cycle ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
E PEMS Hazards - IEC 60601 Clause 14.6 - Internal data use - Pressure sensor IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
S MDR GSPR Clause 17 - Software Requirements EU Medical Device Regulations 2
B IEC 60601-2-43 - Clause 203.6.103 - Physical button? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
K Contamination Control - Class Is medical devices (Clause 6.4.2 ISO 13485:2016 (E)) ISO 13485:2016 - Medical Device Quality Management Systems 12
R Clause 7.7 Replicate, Recalibration and Intermediate checks using Artifact ISO 17025 related Discussions 1
A ISO 13485 - Clause 8.3.3 appropriate actions in response to nonconforming product ISO 13485:2016 - Medical Device Quality Management Systems 2
M Description of the requirements of clause 9.2.2.3 manufacturing process audit- needs your feedback IATF 16949 - Automotive Quality Systems Standard 0
A ISO 41001:2018 - Clause No.8 Operations Part Quality Management System (QMS) Manuals 2
L AS5553 Clause 3.1.7 e "Control packaging material ..................reused" AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
R What is meant by Use of COMPONENTS WITH HIGH-INTEGRITY CHARACTERISTICS in ME EQUIPMENT (clause no 4.9) IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
K What is mean by Oxygen Rich Environment as per the IEC 60601-1 clause no 11.2.2 IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
P Definition of production tooling in IATF16949 clause 8.5.1.6 IATF 16949 - Automotive Quality Systems Standard 4
K ISO 13485:2016, Clause 4.2.3 Medical Device File ISO 13485:2016 - Medical Device Quality Management Systems 4
I Master Document Access - ISO 9001:2015 clause 7.5.3 Document Control Systems, Procedures, Forms and Templates 5
qualprod Why new clause (7.1.6) in ISO 9001:2015? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
B Clause 5.1.12 of Technical Standard IEC 62304/A1 IEC 62304 - Medical Device Software Life Cycle Processes 5
F ISO 13485 8.2.3 Reporting to regulatory authorities: Question regarding a procedure for this clause. ISO 13485:2016 - Medical Device Quality Management Systems 4

Similar threads

Top Bottom