EN 10204 type 3.1 question - Chinese Steel Mill Certificate

B

booman83

#1
Hi, I have mill certificate of some chinese steel. But it does not state that it is in accordance with EN 10204 type 3.1. I am obligated to provide my customer type 3.1, am I right to assume that this certificate is in accordance to this standard if it fulfills the description of type 3.1?
 
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#3
Hi, I have mill certificate of some chinese steel. But it does not state that it is in accordance with EN 10204 type 3.1. I am obligated to provide my customer type 3.1, am I right to assume that this certificate is in accordance to this standard if it fulfills the description of type 3.1?
It depends on (A) the nature of the "certificate," and (B) whatever customer requirements you might need to satisfy. If you have a test report that includes actual test results traceable to a heat (lot) of material, and the results comply fully with the requirements in the standard, the supplier has given what you asked for unless you have a requirement for the report to cite the standard. This would be expected in automotive work, for example.
 
R

Riverbend

#4
If your customer is requiring conformance to the PED 97/23/EC, then the answer would be no, the MTR must state the EN10204 and the 3.1, or the previous 3.1.A. And the supplier must have a quality system certified by a competent body, established within the community, aka, an ISO 9000 cert or equal and have been registered by a notified body from Europe, such as a TUV. AKA/Trade Barrier, about like a CRN for Canada is.
This is from the PED annex 1, 4.3
Hope this helps,
 
Thread starter Similar threads Forum Replies Date
B QCP (Quality Control Plan) from client with EN 10204 type 3.1 Material Certificates Various Other Specifications, Standards, and related Requirements 2
J Compliance to EN 10204 Type 3.2 Certification Various Other Specifications, Standards, and related Requirements 3
M EN 10204 type 2.2 certificate example - Titanium component - Aerospace Industry Various Other Specifications, Standards, and related Requirements 2
K Inspection Certificate EN 10204 2.1 - Distribution company Other ISO and International Standards and European Regulations 4
T EN 10204 3.1 Inspection Certificate - Machine Shop Various Other Specifications, Standards, and related Requirements 4
J Is there an ISO doc that is similar to DIN EN 10204? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
C Certificate EN 10204 for Elastomer (materials other than metals)? CE Marking (Conformité Européene) / CB Scheme 6
D Is EN 10204 3.1 an Equivalent Standard to 'COD QC 3.1 Rev 7 2009'? CE Marking (Conformité Européene) / CB Scheme 5
L Is En 10204:2004 (e) 3.1 equivalent to ASTM A788? Various Other Specifications, Standards, and related Requirements 4
N EN 10204 3.1B Material Certification and Identification Various Other Specifications, Standards, and related Requirements 19
ScottK Is there a US equivalent to BS EN 10204? Various Other Specifications, Standards, and related Requirements 3
RoxaneB EN 10204 Clause 3.1B - Definition, Summary and Form Various Other Specifications, Standards, and related Requirements 29
M Class II type machine , and its compliance with 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 14
W What is the difference between TYPE B and TYPE BF? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
Nihls MSA Study Type 1 (CMM) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
D Separation of F-type applied part and remaining parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
M MSA Study Type 1 not capable. We are at the limit. And manufacturing wants to continue producing. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
cnbrosa Study Type 1 on a CMM using a measuring support Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
A Fabric roll inspection - What type of Control Chart to use? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A AMSQQP416E Class 2 type 2 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
S Are EC type examinations still being conducted under MDR? EU Medical Device Regulations 5
S Medical watch Class II (AP Type CF) with USB connection IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
Johnnymo62 Non Aerospace topics - Anything for military trucks, trailers, Humvee type vehicles? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
N BF-type applied part MOPP vs secondary IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
Marcel DS GOST-R (Type approval for Vehicles in Russia) Other ISO and International Standards and European Regulations 0
S Type 1 Gage R&R or something else? Reliability Analysis - Predictions, Testing and Standards 6
I Old Time Scatter diagrams for defect type and location- software Quality Tools, Improvement and Analysis 7
P Surgical masks ( type IIR) - Cleanroom Requirements EU Medical Device Regulations 3
W Insulation requirements of BF type infant skin temperature probe IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4
N Infant radiant warmer - Heater Quartz Element type Other Medical Device Related Standards 0
N % Tolerance - Type 1 study on the gages, then a gage R&R (ANOVA) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Definitive answer on Type 1 vs Type 2 vs Type 3 Gage Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
K Validation of new machine (second machine of the same type) Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
F Operator Manual and Type B Uncertainty Measurement Uncertainty (MU) 3
B Minitab Type 1 Gage Study on True Position Question Measurement Uncertainty (MU) 1
M SI #7 8.4.2.1 Type and extent of control_supplemental IATF 16949 - Automotive Quality Systems Standard 3
B F-type applied part - Separation from ALL(?) other parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
A Gage type 1 study on CMM Capability, Accuracy and Stability - Processes, Machines, etc. 2
A IATF Sanctioned Interpretation No. 7 - Type and Extent of Control (supplemental) IATF 16949 - Automotive Quality Systems Standard 4
K F-TYPE APPLIED PART IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
I AS9100 8.4.2 Type and Extent of Control - External provider test reports Manufacturing and Related Processes 24
F Determining what type of scrap to include in my internal PPM calculation Quality Manager and Management Related Issues 5
R In this type of Legal Manufacturer-CMO arrangement, what happens to the DHR? ISO 13485:2016 - Medical Device Quality Management Systems 1
J AQL for Effectiveness Check - What AQL tiers to use on this type of sampling? Nonconformance and Corrective Action 9
T Type BF or CF (Direct conductive contact with the heart) IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
G MSA Type 1 - Cg and Cgk ranges Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
P IVDD - IFU related requirements - Type of information/statement expected EU Medical Device Regulations 1
B Documented process for type and extent of control IATF 16949 - Automotive Quality Systems Standard 6
P Definition Business Type - Definition of what we do-Business Type Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 4

Similar threads

Top Bottom