SBS - The Best Value in QMS software

Ergonomics & Time study - Concepts for experiments in above mentioned topics?

A

avkulkar

#1
hello,
i am a faculty of mechanical engg.we are planning to add some basic experiments for our industrial engg. lab. on topics like method study, time stdy, two hand and man-machine charts , ergonomics & human factors etc. can anyone put suggestions and/or rough skech/concepts for experiments in above mentioned topics?

----amit

we are having experiments like NUT BOLT ASSEMBLY for time and motion study but the problem is that these are in their 'crudest' form and lack the "glamour" , so students get bored .
 
Elsmar Forum Sponsor
S

srrenganathan

#3
Hi Amit

I think the best time study experiments would be done thru the videos of the operations. Do the video of anything you want the students to do the experiment and run it for them.

Let them 'see' and perform the study. This way you give them real live experiences.

Hope my suggestion is helpful - but may be a bit difficult to establish.

Pl ask if you want more info on this.

Rgds
Renga
 
M

MysterHK

#4
Here's my contribution:

The next operation that these sheet metal panels go to is the welding department. Fillet welds and square welds are to be applied on all four corners.

In the first picture, why would stacking these panels in a "criss-cross" manner (on the right) save time for both the welder and the QC inspector?

The answer is simple. All the welder would have to do is go from top to bottom and apply the welds on each corner by just simply rotating the pallet that the panels are stacked on. Likewise, the inspector could do a 100% inspection on all the welds in the same manner.

This not only will save you time and money, but another important benefit is that the material is not "double-handled".

Hope this helps. :)
 

Attachments

Thread starter Similar threads Forum Replies Date
A ISO 9001 Ergonomics and Manual Handling Requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
P Ergonomics .ppt presentation Training - Internal, External, Online and Distance Learning 2
M Ergonomics - Human Hand - Maximum force - Wheel/Flywheel - Help ASAP :) Human Factors and Ergonomics in Engineering 8
V Have you any materials for Ergonomics and Motion? Training - Internal, External, Online and Distance Learning 3
V Looking for Ergonomics Advice - Operators will run two machines simultaneously Human Factors and Ergonomics in Engineering 13
H Ergonomics Metrics (Measureables) - Human factors engineering Lean in Manufacturing and Service Industries 39
F Human Factors & Ergonomics - FAR Part 145.163 'Training Program' - Aviation Industry Human Factors and Ergonomics in Engineering 20
S OHSAS 18001 - Ergonomics in OHSAS implementation Occupational Health & Safety Management Standards 7
M Type 1 Gage r study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
A Mistakes in the CQE Study Guide Misc. Quality Assurance and Business Systems Related Topics 3
Nihls MSA Study Type 2 (special conditions ) IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
D What are the acceptance criteria/requirements for Stability Study? General Measurement Device and Calibration Topics 7
S 95% UCL - Attaching an excel for recovery study Statistical Analysis Tools, Techniques and SPC 0
Nihls MSA Study Type 1 (CMM) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
D Low risk IVD study in the UK, do I need MHRA approval? UK Medical Device Regulations 1
M MSA Study Type 1 not capable. We are at the limit. And manufacturing wants to continue producing. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
cnbrosa Study Type 1 on a CMM using a measuring support Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Lean: Conducting Capacity Study, calculating Cycle times on laser cutting machines Lean in Manufacturing and Service Industries 2
P MSA study for visual system with artifical inteligence Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
A Capability Study - in the beginning of your career what should you have known about the tool Quality Tools, Improvement and Analysis 11
Q Capability study with a minimum spec Statistical Analysis Tools, Techniques and SPC 8
E Use of OQ cleared batch for stability and clinical study use ISO 13485:2016 - Medical Device Quality Management Systems 0
S Study sign off question / responsibilities ISO 13485:2016 - Medical Device Quality Management Systems 3
M ISO 9001:2015 case study sample ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Case study help as per ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
M Case study solution help required as per ISO 9001 : 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
M Case study resources ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
S A clinical performance evaluation study with an IVD product as Investagional Use product - Clinical Monitor requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
T Attributes SPC study - Attributive control (Go gage) Statistical Analysis Tools, Techniques and SPC 5
S Capability or Gage R&R Study for Leak Tester? Reliability Analysis - Predictions, Testing and Standards 15
N % Tolerance - Type 1 study on the gages, then a gage R&R (ANOVA) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Definitive answer on Type 1 vs Type 2 vs Type 3 Gage Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
D Gage R&R Study on Load Cells - Large chemical blending tanks IATF 16949 - Automotive Quality Systems Standard 1
A CE Mark and PMCF study EU Medical Device Regulations 3
Q % Study variation low, % tolerance high - GR&R Interpretation help Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
A Gauge Study for Small Lots Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
K IATF & Attribute Study requirements IATF 16949 - Automotive Quality Systems Standard 9
T Correct MSA study for an automated camera system which makes attribute inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
DuncanGibbons Looking for example aerospace part CAD files to be used for a case study Career and Occupation Discussions 2
B Minitab Type 1 Gage Study on True Position Question Measurement Uncertainty (MU) 1
L ASQ CBA biomedical auditor - CBA primer material is enough to study? ISO 13485:2016 - Medical Device Quality Management Systems 6
S Machine Setup for a CNC Machine Capability Study Capability, Accuracy and Stability - Processes, Machines, etc. 1
M Brazil forced degradation study requirements Reliability Analysis - Predictions, Testing and Standards 0
P RAC-US Spring 2020 Study group_Discussions Professional Certifications and Degrees 19
M Custom Medical Device For Clinical Study Other Medical Device Regulations World-Wide 1
G Capability Study for Tapped Hole Reliability Analysis - Predictions, Testing and Standards 3
R PMCF plan to justify that our product not require PMCF study EU Medical Device Regulations 9
E How much a bioequivalence study will cost in the UK Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
A Gage type 1 study on CMM Capability, Accuracy and Stability - Processes, Machines, etc. 2
N MSA Study for a Leak Testing Device Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6

Similar threads

Top Bottom