SBS - The Best Value in QMS software

Error in data recording - Recording measurements in SAP

chris1price

Trusted Information Resource
#1
Hi, we are recording measurements in SAP using height gauges linked through a Steinwald interface. Occasionally, about 1 time in 100 the gauge indicates a different measurement to that recorded in SAP, usually an error of +/-0.01mm.

Can anyone suggest the cause of this discrepancy?

Thanks, Chris
 
Elsmar Forum Sponsor

Ninja

Looking for Reality
Staff member
Super Moderator
#2
Check to see if there are any subfunctions running in SAP for the data collection field (triggered scripts, validation/recalcs, etc.)

Another trouble shooting test would be to load off into XL instead of SAP and see if the same behavior exists. If so, it is likely the gage interface software.

HTH
 
Thread starter Similar threads Forum Replies Date
Z Adding 1% error to data in a column in Minitab Using Minitab Software 3
A Minitab ANOVA Error Message - *ERROR* No data in column. Using Minitab Software 3
C Client Order Data Error Tracking ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
bobdoering Dr. Wheeler on "How Measurement Error Affects the Four Ways We Use Data" Measurement Uncertainty (MU) 0
S Maximum error of a z value from sample data Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
F Error in Minitab (no statistics can be calculated with these data) Using Minitab Software 10
D Use Error Risk Controls and Control Verification ISO 14971 - Medical Device Risk Management 5
H California Instrument AC Load - 222 Error Message Manufacturing and Related Processes 0
O Problem in Minitab - ERROR * Factor Voltage is highly correlated with other terms Using Minitab Software 10
bobdoering Informational Ndc Calculation Error Caution Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
I IMDS Error Message Question RoHS, REACH, ELV, IMDS and Restricted Substances 1
P Pooled Standard Error - Minitab Statistical Analysis Tools, Techniques and SPC 0
R Clinical accuracy and repeatability of IR(infrared) thermometer, no maximum error criteria is recommended in ISO Other Medical Device Related Standards 11
P IATF 16949 requirement - error-proofing in control plan IATF 16949 - Automotive Quality Systems Standard 3
R Error Proofing Label process Manufacturing and Related Processes 4
M Measurement Error - How to determine what is acceptable? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
Jimmy123 What is the difference between Error Proofing and Controls? ISO/IATF 16949 - Control Plans FMEA and Control Plans 16
F No reproducibility Error in Gage R&R? Reliability Analysis - Predictions, Testing and Standards 4
M Error trying to Start a New Thread Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 2
M Trouble with Europa website - Internal Server Error (March 2019) EU Medical Device Regulations 5
Marc Definition MPEE - Maximum Permissible Error for Length Measurement Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
S Need help wrapping my head around confidence vs beta error Statistical Analysis Tools, Techniques and SPC 2
D Error proofing ideas sheet metal punches Manufacturing and Related Processes 8
G How to include machine error in uncertainty calculations? Measurement Uncertainty (MU) 5
R Rank Deficiency Error Minitab Using Minitab Software 7
W IMDS - Help (Common Warning and Error Fixes) RoHS, REACH, ELV, IMDS and Restricted Substances 9
K Documented problem solving and documented error-proofing - IATF 16949 10.2.3 & 10.2.4 Internal Auditing 7
M Methods of reducing/eliminating the systematic component of error General Measurement Device and Calibration Topics 0
J Hardness inspection Audit Finding Employee error Nonconformance and Corrective Action 6
G ANAB ISO 17025 Accreditation - Uncertainty and systematic error? ISO 17025 related Discussions 6
shimonv IEC 60601-1-8 - When does an error message become an alarm signal? IEC 60601 - Medical Electrical Equipment Safety Standards Series 14
E Non Conformity due to Outsourced Internal Audit Error ISO 14001:2015 Specific Discussions 2
T Human Error vs Technique Root Cause (Categories) Human Factors and Ergonomics in Engineering 9
W Using MPE (Mean Percentage Error) for Linearity and Type-1 study Measurement Uncertainty (MU) 1
P IATF 16949 Clause 10.2.4 - Error Proofing IATF 16949 - Automotive Quality Systems Standard 33
K Poka-Yoke for Quantity Shortage caused by Human Error Quality Tools, Improvement and Analysis 7
E How to use the Standard Error and how to set the error limits? Reliability Analysis - Predictions, Testing and Standards 2
optomist1 Error Mistake Proofing Color Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
T Standard Deviation vs. Standard Deviation of the Mean (Standard Error) Measurement Uncertainty (MU) 7
N How Can I Prevent A Labeling Error? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
M Are 'Error Proofing Methods' required to be mentioned in Control Plans? FMEA and Control Plans 7
N Non-conformances due to Human Error Nonconformance and Corrective Action 64
B How to check the parallelism error of v axis w.r.t to lateral surfaces General Measurement Device and Calibration Topics 1
C List Error Proofing in the Process FMEA or the Control Plan FMEA and Control Plans 2
P Taguchi Anova Error with Minitab Using Minitab Software 9
R Repeatability in MSA - Is repeatability a measure of Location Error Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R Error in Master Weighing Stone General Measurement Device and Calibration Topics 2
K Sample size and type 1-error when use special cause test Statistical Analysis Tools, Techniques and SPC 8
Y No permissible error statement on the thermometer calibration report General Measurement Device and Calibration Topics 7
9 Ideas for reducing Human Error during Order Receipt Quality Manager and Management Related Issues 4

Similar threads

Top Bottom