Error in Master Weighing Stone

raghu_1968

Involved In Discussions
#1
After getting the weighing stone stamped from our government agency (It is the routine practice that every year stamping has to be obtained), observed the error between the master weighing stone and the primary stone in the plant. How to handle this.

Thanks.
 
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#2
Does the stamping involve calibration? In other words, when the stamping is done, is the weight checked against a calibrated master? Is the error significant with regard to the tolerance? Has the primary stone been calibrated?

If you could provide more information we can give better advice.
 

raghu_1968

Involved In Discussions
#3
Yes Stamping involves calibration and the report not received. Even though stamping involves calibration our practice is to get calibrated after stamping with the third party calibration agency.Error is significant with respect to the tolerance. Primary weight is calibrated and there is no error in the primary error.
 
Thread starter Similar threads Forum Replies Date
P Pooled Standard Error - Minitab Statistical Analysis Tools, Techniques and SPC 0
R Clinical accuracy and repeatability of IR(infrared) thermometer, no maximum error criteria is recommended in ISO Other Medical Device Related Standards 11
P IATF 16949 requirement - error-proofing in control plan IATF 16949 - Automotive Quality Systems Standard 3
R Error Proofing Label process Manufacturing and Related Processes 4
M Measurement Error - How to determine what is acceptable? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
Jimmy123 What is the difference between Error Proofing and Controls? ISO/IATF 16949 - Control Plans FMEA and Control Plans 16
F No reproducibility Error in Gage R&R? Reliability Analysis - Predictions, Testing and Standards 4
M Error trying to Start a New Thread Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 2
M Trouble with Europa website - Internal Server Error (March 2019) EU Medical Device Regulations 5
Marc Definition MPEE - Maximum Permissible Error for Length Measurement Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
S Need help wrapping my head around confidence vs beta error Statistical Analysis Tools, Techniques and SPC 2
D Error proofing ideas sheet metal punches Manufacturing and Related Processes 8
G How to include machine error in uncertainty calculations? Measurement Uncertainty (MU) 5
R Rank Deficiency Error Minitab Using Minitab Software 7
W IMDS - Help (Common Warning and Error Fixes) RoHS, REACH, ELV, IMDS and Restricted Substances 9
K Documented problem solving and documented error-proofing - IATF 16949 10.2.3 & 10.2.4 Internal Auditing 7
M Methods of reducing/eliminating the systematic component of error General Measurement Device and Calibration Topics 0
chris1price Error in data recording - Recording measurements in SAP Capability, Accuracy and Stability - Processes, Machines, etc. 2
J Hardness inspection Audit Finding Employee error Nonconformance and Corrective Action 6
G ANAB ISO 17025 Accreditation - Uncertainty and systematic error? ISO 17025 related Discussions 6
shimonv IEC 60601-1-8 - When does an error message become an alarm signal? IEC 60601 - Medical Electrical Equipment Safety Standards Series 14
E Non Conformity due to Outsourced Internal Audit Error ISO 14001:2015 Specific Discussions 2
T Human Error vs Technique Root Cause (Categories) Human Factors and Ergonomics in Engineering 9
W Using MPE (Mean Percentage Error) for Linearity and Type-1 study Measurement Uncertainty (MU) 1
P IATF 16949 Clause 10.2.4 - Error Proofing IATF 16949 - Automotive Quality Systems Standard 25
K Poka-Yoke for Quantity Shortage caused by Human Error Quality Tools, Improvement and Analysis 7
E How to use the Standard Error and how to set the error limits? Reliability Analysis - Predictions, Testing and Standards 2
optomist1 Error Mistake Proofing Color Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
T Standard Deviation vs. Standard Deviation of the Mean (Standard Error) Measurement Uncertainty (MU) 7
Z Adding 1% error to data in a column in Minitab Using Minitab Software 3
N How Can I Prevent A Labeling Error? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
M Are 'Error Proofing Methods' required to be mentioned in Control Plans? FMEA and Control Plans 7
N Non-conformances due to Human Error Nonconformance and Corrective Action 64
B How to check the parallelism error of v axis w.r.t to lateral surfaces General Measurement Device and Calibration Topics 1
C List Error Proofing in the Process FMEA or the Control Plan FMEA and Control Plans 2
P Taguchi Anova Error with Minitab Using Minitab Software 9
R Repeatability in MSA - Is repeatability a measure of Location Error Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
K Sample size and type 1-error when use special cause test Statistical Analysis Tools, Techniques and SPC 8
Y No permissible error statement on the thermometer calibration report General Measurement Device and Calibration Topics 7
9 Ideas for reducing Human Error during Order Receipt Quality Manager and Management Related Issues 4
J Corrective Action Process and Human Error ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
T Error Proofing / Poka-Yoke Textbook by Productivity Inc Book, Video, Blog and Web Site Reviews and Recommendations 7
S 'Over Compliance' Error message in Wavetek 9100 General Measurement Device and Calibration Topics 10
A Scale Error Calculator wanted General Measurement Device and Calibration Topics 2
N Calibration Lab unable to issue Accredited Certificate when error is too high? General Measurement Device and Calibration Topics 3
P Countermeasure For CMM Operator Error Problem Solving, Root Cause Fault and Failure Analysis 4
J Minitab Error - * ERROR * Unbalanced Design - Unbalanced Anova Using Minitab Software 9
S Manufacturing Error-proofing Packers mixing up which 4 Mats go together in a Kit Manufacturing and Related Processes 3
K Step by Step Gauge R&R with 10% maximum allowable Gauge Error Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
N 5 or 7 P Concept - Human Error Six Sigma 6

Similar threads

Top Bottom