Error Mistake Proofing Color Parts

optomist1

A Sea of Statistics
Trusted Information Resource
#1
Good Day To All,

Searched the Cove but came up empty handed:
Anyone have any experience error/mistake proofing automotive interior parts to insure that the correct parts are approved and shipped.

Sounds simple yet in this case it is a matter of distinguishing between different shades of black. We manufacture the same part but in different shades of black.

Any assistance would be great....

Optomist1
 
Elsmar Forum Sponsor
P

PaulJSmith

#4
Good ideas, but as always, make sure any color coding you use doesn't mean something different in your customer's facility.
 

optomist1

A Sea of Statistics
Trusted Information Resource
#5
Thanks for the insight, yes "Green" may have different meaning to different customers/manufacturing location.....
 

somashekar

Staff member
Super Moderator
#6
Master part (at least three different batch) for comparison.
Ensure that are stored well and life determined.
Defined lighting.
Defined viewing angle.
Defined time of inspection.
Training and validation of personnel inspecting about what is point defect, line defect, area defect.
 
Thread starter Similar threads Forum Replies Date
sathis Definition Error Proofing vs. Mistake Proofing - Differences? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 11
D Definition Error-Proofing vs. Mistake-Proofing - Differences Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 5
R Error Proofing Label process Manufacturing and Related Processes 4
M Measurement Error - How to determine what is acceptable? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
Jimmy123 What is the difference between Error Proofing and Controls? ISO/IATF 16949 - Control Plans FMEA and Control Plans 16
F No reproducibility Error in Gage R&R? Reliability Analysis - Predictions, Testing and Standards 4
M Error trying to Start a New Thread Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 2
M Trouble with Europa website - Internal Server Error (March 2019) EU Medical Device Regulations 5
Marc Definition MPEE - Maximum Permissible Error for Length Measurement Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
S Need help wrapping my head around confidence vs beta error Statistical Analysis Tools, Techniques and SPC 2
D Error proofing ideas sheet metal punches Manufacturing and Related Processes 8
G How to include machine error in uncertainty calculations? Measurement Uncertainty (MU) 5
R Rank Deficiency Error Minitab Using Minitab Software 5
W IMDS - Help (Common Warning and Error Fixes) RoHS, REACH, ELV, IMDS and Restricted Substances 9
K Documented problem solving and documented error-proofing - IATF 16949 10.2.3 & 10.2.4 Internal Auditing 7
M Methods of reducing/eliminating the systematic component of error General Measurement Device and Calibration Topics 0
chris1price Error in data recording - Recording measurements in SAP Capability, Accuracy and Stability - Processes, Machines, etc. 2
J Hardness inspection Audit Finding Employee error Nonconformance and Corrective Action 6
G ANAB ISO 17025 Accreditation - Uncertainty and systematic error? ISO 17025 related Discussions 6
shimonv IEC 60601-1-8 - When does an error message become an alarm signal? IEC 60601 - Medical Electrical Equipment Safety Standards Series 13
E Non Conformity due to Outsourced Internal Audit Error ISO 14001:2015 Specific Discussions 2
T Human Error vs Technique Root Cause (Categories) Human Factors and Ergonomics in Engineering 9
W Using MPE (Mean Percentage Error) for Linearity and Type-1 study Measurement Uncertainty (MU) 1
P IATF 16949 Clause 10.2.4 - Error Proofing IATF 16949 - Automotive Quality Systems Standard 25
K Poka-Yoke for Quantity Shortage caused by Human Error Quality Tools, Improvement and Analysis 7
E How to use the Standard Error and how to set the error limits? Reliability Analysis - Predictions, Testing and Standards 2
T Standard Deviation vs. Standard Deviation of the Mean (Standard Error) Measurement Uncertainty (MU) 7
Z Adding 1% error to data in a column in Minitab Using Minitab Software 3
N How Can I Prevent A Labeling Error? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
M Are 'Error Proofing Methods' required to be mentioned in Control Plans? FMEA and Control Plans 7
N Non-conformances due to Human Error Nonconformance and Corrective Action 64
B How to check the parallelism error of v axis w.r.t to lateral surfaces General Measurement Device and Calibration Topics 1
C List Error Proofing in the Process FMEA or the Control Plan FMEA and Control Plans 2
P Taguchi Anova Error with Minitab Using Minitab Software 9
R Repeatability in MSA - Is repeatability a measure of Location Error Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R Error in Master Weighing Stone General Measurement Device and Calibration Topics 2
K Sample size and type 1-error when use special cause test Statistical Analysis Tools, Techniques and SPC 8
Y No permissible error statement on the thermometer calibration report General Measurement Device and Calibration Topics 7
9 Ideas for reducing Human Error during Order Receipt Quality Manager and Management Related Issues 4
J Corrective Action Process and Human Error ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
T Error Proofing / Poka-Yoke Textbook by Productivity Inc Book, Video, Blog and Web Site Reviews and Recommendations 7
S 'Over Compliance' Error message in Wavetek 9100 General Measurement Device and Calibration Topics 10
A Scale Error Calculator wanted General Measurement Device and Calibration Topics 2
N Calibration Lab unable to issue Accredited Certificate when error is too high? General Measurement Device and Calibration Topics 3
P Countermeasure For CMM Operator Error Problem Solving, Root Cause Fault and Failure Analysis 4
J Minitab Error - * ERROR * Unbalanced Design - Unbalanced Anova Using Minitab Software 9
S Manufacturing Error-proofing Packers mixing up which 4 Mats go together in a Kit Manufacturing and Related Processes 3
K Step by Step Gauge R&R with 10% maximum allowable Gauge Error Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
N 5 or 7 P Concept - Human Error Six Sigma 6
E Inter-Laboratory Proficiency Testing Result Analysis - z Score or Normalized Error General Measurement Device and Calibration Topics 3

Similar threads

Top Bottom