ESD cleanroom

Elsmar Forum Sponsor

blackholequasar

The Cheerful Diabetic
#2
So are they making the cleanroom an EPA? There are definitely ways to create a cleanroom-approved EPA. A lot of chip producers create product under these sorts of conditions. Heel straps, wrist straps and certain faraday cages may be acceptable.
 
#4
The cleanroom has been in operation for years. We have the correct gowns, booties, lab coats. proper procedures before entering and all that. We are a government sub contractor. Everything has to be tip top. I just noticed that lab coats we have already have carbon properties in them just like ESD smocks or ESD lab coats. So, does this mean the old lab jackets are ESD safe? In retro, are ESD lab coats cleanroom safe as well? ESD smocks are also made from polyester and a higher % of carbon......
 

outdoorsNW

Quite Involved in Discussions
#5
I doubt standard ESD clothing is a good idea in a cleanroom, but I am guessing that combination ESD and cleanroom clothing is available. A lot depends of how clean your cleanroom needs to be. Most computer chips are ESD sensitive, so the need for dual purpose clothing would seem to be common.
 
Thread starter Similar threads Forum Replies Date
A Metal Enclosure Connected to PCB Ground for ESD Reasons IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
A Defining a lower ESD test level in IEC 60601 safety test IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
A Preparing an ESD workstation Preventive Action and Continuous Improvement 6
F Does anyone have an ESD quality/cooler talk to share? Training - Internal, External, Online and Distance Learning 4
F ESD workbench "calibration" Manufacturing and Related Processes 2
Ed Panek Auditor driving us nuts - ESD requirements ISO 13485:2016 - Medical Device Quality Management Systems 23
M ESD (Electrostatic Discharge) Training Misc. Quality Assurance and Business Systems Related Topics 2
Q AS9120B - ESD monitoring devices part of 7.1.5 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
Q AS9120 Vendor of ESD Monitoring Equipment needs to be in the Approved Supplier List? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
R Laminate ESD Mats - Low resistance (RTT) readings Manufacturing and Related Processes 6
Tagin Recommendations for calibration labels for ESD floor mats General Measurement Device and Calibration Topics 9
I ESD - Dissipative foam on a seat for where the people sit at benches Manufacturing and Related Processes 6
C Looking for RED ESD Bags that preferably say NON-CONFORMING Manufacturing and Related Processes 5
N ESD and Humidity Monitoring in Work Areas Manufacturing and Related Processes 1
K ESD Protection in the Assembly Bay ISO 13485:2016 - Medical Device Quality Management Systems 9
M ESD flooring - The difference between tile and epoxy floors Reliability Analysis - Predictions, Testing and Standards 3
B ESD Floor Wax on standard tile Manufacturing and Related Processes 5
W EMC, ESD for battery operated apparatus Other Medical Device and Orthopedic Related Topics 1
B Detachable Power Supply Cable Connection ESD Clarification IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
L ESD Label ... but in French Misc. Quality Assurance and Business Systems Related Topics 1
L Wearing an ESD Smock with Rolled Up Sleeves Misc. Quality Assurance and Business Systems Related Topics 4
L Calibration of ESD Wrist Strap Tester General Measurement Device and Calibration Topics 14
L ESD for Class 2 Wafer Fab products Manufacturing and Related Processes 2
I Device Can't Pass IEC 60601-2 ESD Requirements IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
D ESD Policy Content Best Practices Manufacturing and Related Processes 8
R ESD issue with capacitive touch screen IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
D ESD Auditor - Qualifications Various Other Specifications, Standards, and related Requirements 2
L Drinking Water Bottle at an ESD Station Manufacturing and Related Processes 2
N IEC 60601-1-2 ESD: Lower Compliance Level for ESD Immunity IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
S Can I use a ESD cart on non-ESD flooring? Manufacturing and Related Processes 2
L ESD Protection and Danger for Operators Manufacturing and Related Processes 3
JoCam ESD Flooring vs. Concrete - Pros and Cons Manufacturing and Related Processes 2
S Differences between Conductive vs. Dissipative ESD Flooring Manufacturing and Related Processes 3
C ESD Bags and Paper Labels (Dymo) on the Bags (Packaging) Misc. Quality Assurance and Business Systems Related Topics 5
K Employee ESD Protection Methodologies - Need input. Training - Internal, External, Online and Distance Learning 8
B How often do you clean your ESD mat? Manufacturing and Related Processes 4
J ESD and Soldering Training Supplier Recommendations Needed Training - Internal, External, Online and Distance Learning 7
P ESD and Bio-Hazards in a Medical Equipment Repair/Maintenance Facility Manufacturing and Related Processes 2
J Where to find info about equivalent standards? ESD issues Other ISO and International Standards and European Regulations 4
Q How to Inspect for ESD (Electro-Static Discharge) Damage Manufacturing and Related Processes 5
B ESD Mats on Workbenches and ESD Surface Resistivity Meter Readings Manufacturing and Related Processes 6
D ESD Quantification - Standalone instrument that can log ESD field strength ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
S ESD Flooring Requirements - Seperate room for soldering process and assembly Manufacturing and Related Processes 5
S MIL-STD-1686 for ESD Compliance help wanted Various Other Specifications, Standards, and related Requirements 3
J NoiseKen ESD Simulators - Opinions on ESD simulator ESS-2002EX Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
A ESD Control Program (Flooring Requirement) Manufacturing and Related Processes 4
B Must chairs be grounded for ESD (electrostatic discharge)? Manufacturing and Related Processes 26
Z Packaging and shipping of multiple PWBA/PCBAs in one ESD protective bag Supplier Quality Assurance and other Supplier Issues 5
Q Validating ESD (Electrostatic Discharge) Flooring ISO 13485:2016 - Medical Device Quality Management Systems 2
V ESD testers and providing calibration service - 7.6.3.2 External Laboratory IATF 16949 - Automotive Quality Systems Standard 3

Similar threads

Top Bottom