Establishing a Gage R&R Studies Program in a Testing Laboratory

S

stlwtrs

#1
Looking for any pointers on conducting or estabilishing a gage r&r program in a testing lab. How should the lab go about setting it up, what gages should be first, second , so on, how to prioritize. I believe they only need to address the gage families, but where should they start. I feel that the important gages are those that mimic production or could have a direct impact on the test results. Looking for any pointers.
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
K Basis for Establishing Gage Tolerancing - "Gage Maker's Tolerances" General Measurement Device and Calibration Topics 4
A Help establishing regulatory requirements - Plastic dental cartridge syringe US Food and Drug Administration (FDA) 0
K ISO 13485 section 5.3 Quality Policy - No framework for establishing and reviewing quality objectives ISO 13485:2016 - Medical Device Quality Management Systems 2
N Use part of high risk device for establishing low risk device EU Medical Device Regulations 0
J ISO 13485:2016 Section 6.2 - Documenting the process for establishing competence ISO 13485:2016 - Medical Device Quality Management Systems 6
M Establishing a FTQ (First Time Quality) process for an engine assembly line Quality Tools, Improvement and Analysis 1
R Establishing the quality policy for ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
N Establishing a monthly scrap cost target Lean in Manufacturing and Service Industries 11
T Establishing -F- datum - need advice Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M Establishing traceability from calibrated glassware to non calibrated ones General Measurement Device and Calibration Topics 5
O Establishing SPC for small batches of 10-15 units Statistical Analysis Tools, Techniques and SPC 10
M Establishing Metrics - Where do you document metrics? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
alonFAI Establishing a Receiving Inspection Procedure Document Control Systems, Procedures, Forms and Templates 5
optomist1 Establishing Sigma or Capabilty Indices for Automotive Safety Quality Tools, Improvement and Analysis 1
S Establishing an MSA Plan and Justification Suggestions wanted Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
M Establishing a QMS - What Daily/Weekly/Monthly activities in Auto Industry IATF 16949 - Automotive Quality Systems Standard 4
T Help establishing a good Customer Complaints Procedure? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
V Process Validation Guidance establishing the Integration with QbD - April 2012 Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
M Establishing Ranges for Weights for Calibration Verification of a Micro-Balance Calibration Frequency (Interval) 1
D Preparing for ISO 29001/API Q1- Establishing Control Features Oil and Gas Industry Standards and Regulations 3
D Establishing Key Process Characteristics (KPC's) Quality Tools, Improvement and Analysis 6
C New Quality Manager - Establishing Teams in different Business Units Quality Manager and Management Related Issues 4
H Noob Frequency Distribution and establishing achievable goals Using Minitab Software 2
K How to apply IEC 62366 and what shall be changed in establishing a Technical File ISO 13485:2016 - Medical Device Quality Management Systems 2
M Establishing monthly production targets with varying number of employees Lean in Manufacturing and Service Industries 6
A Why do I need batch size in establishing control plan to certain AQL?? AQL - Acceptable Quality Level 4
E Need help establishing a DMR (Device Master Record) 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
K Establishing the Environmental Aspects and Impacts for a Septic Tank Miscellaneous Environmental Standards and EMS Related Discussions 5
M Establishing simple procedure and work instruction using chart or photo or video Document Control Systems, Procedures, Forms and Templates 2
L Criteria for Establishing Control Plan Sample Size and Inspection Frequency FMEA and Control Plans 7
K Inventory Management - Establishing a procedure for Inventory Management Document Control Systems, Procedures, Forms and Templates 2
K Establishing Item Codes for Production Raw Materials Misc. Quality Assurance and Business Systems Related Topics 2
O Establishing the current value of KPI's (Key Performance Indicators) Manufacturing and Related Processes 1
Y Establishing and Measuring Individual Performance to Product Quality Standards Misc. Quality Assurance and Business Systems Related Topics 5
C Establishing alert and action limits for clean room bioburden Other Medical Device and Orthopedic Related Topics 9
E Establishing a biocompability test lab for testing EN 10993 series EU Medical Device Regulations 1
D Establishing and controlling process capability - Meaning of Phrases Capability, Accuracy and Stability - Processes, Machines, etc. 2
P Establishing Thickness Specifications from Measured Data Capability, Accuracy and Stability - Processes, Machines, etc. 11
A Initial condition for establishing significant environmental aspects Miscellaneous Environmental Standards and EMS Related Discussions 1
S Establishing Control of Regulations that concern my company Quality Manager and Management Related Issues 12
D Establishing New Training Procedure - Past Training of Existing Employees Training - Internal, External, Online and Distance Learning 6
J Establishing Proposal Metrics in a Factory Construction Company Quality Tools, Improvement and Analysis 6
A How to do Equipment Validation - Establishing our ISO 13485 QMS procedures Qualification and Validation (including 21 CFR Part 11) 26
B True Position without tertiary datum? Establishing a proper rotation Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
Coury Ferguson Interpretation of IAF Guide 62 - Establishing the Competence of the Auditors Registrars and Notified Bodies 11
S Establishing Internal Audit Nonconformity Level Criteria - Major vs. Minor? Internal Auditing 46
H Establishing Employee Competencies and Training - Future Training Plan ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
P China - Establishing Quality Systems for Chinese Suppliers Supplier Quality Assurance and other Supplier Issues 8
Q Feedback System (8.2.1) - Requirements for "..establishing a documented procedure..." ISO 13485:2016 - Medical Device Quality Management Systems 5
Douglas E. Purdy Transition to ISO 9001:2000 - RFI - 009, RFI-003, & Establishing a QMS ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9

Similar threads

Top Bottom