I'm looking for an ethernet isolation transformer that I can place on our pcb that is medical grade ive contacted many of the large suppliers but haven't had any luck. Could someone suggest any part numbers. I know they are out there because medical devices do have them
Hi Nikolaos,
Thank you for the suggestion. For our specification required creepage is 4.6mm and 2.5mm with as isolation voltage of 1,500 is that what your requirments are. Also the parts have to be UL certified to these specifications I don't see that the ones you recommended are UL certified.
How does your UL Auditior verify that the part actually meets these specifications?
Hello eephotoki,
I am in the same situation as you were. 1.5KV & creepage 4.6mm & air 2.5mm
I can't see any information about distance from attach pdf file, what is the final solution you are choosing?
Thanks
Thought you might be interested in a new paper from Littlefuse examining ESD protection of ethernet datalines. The paper discusses how the ESD pulse can be introduced directly into the open port, or into the disconnected end of the cable.
I had a similar design problem creating a 60601-1 compliant ethernet port. I found the solution with a specially designed PCB mounted transformer from EMO Systems Inc in Texas.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to the use of cookies.