SBS - The best value in QMS software

Evaluating my QMS (Quality Management System)

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#11
Re: Need to evaluate my QMS

However, it may be worthwhile asking another consultant/auditor to give it a look at.
I've done a lot of implementations over the last 15+ years, and MANY times I have another auditor 'Check My Work'. When I get really involved in the implementation, it does come to pass that the risk factor is too high to rely on my judgment totally. If it was a 'critical' implementation, I brought in an independent auditor to do a run through to see if there was anything I had missed.
 
Elsmar Forum Sponsor

harry

Super Moderator
#12
While pre-assessments are fairly common in the USA, Canada and Europe, we must realize that (in other, sometimes developing countries) such services may be cost prohibitive. Especially for very small organizations such as the OP's. We sometimes tend to take things for granted, while other areas of the world do not.

Just some thoughts.

Stijloor.
Pre-assessments are offered over here also and for a small organization its one to two mandays (reasonable cost). However for those engaging consultants, they do not expect to pay for this as the consultant is deemed capable enough to get them through this stage.

Unless you are very confident, other wise you should avoid practicing alone. It's in situations like this that you need another member of your team to come in for a second view/opinion. The often frowned upon generic audit checklist is good in this situation to check if you had covered all grounds.
 
Thread starter Similar threads Forum Replies Date
Tagin Evaluating nonconformances for escalation using Bayesian methods? Statistical Analysis Tools, Techniques and SPC 2
R Evaluating the need for preventive action Preventive Action and Continuous Improvement 3
M Informational US FDA – FDA provides updates on the agency’s continued commitment to evaluating postmarket safety of Essure device Medical Device and FDA Regulations and Standards News 0
S Evaluating the possibilities of using qmswrapper or greenlightguru Document Control Systems, Procedures, Forms and Templates 4
C Evaluating GRR Scores %Tol vs %TV Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
Q Evaluating Effectiveness of a Preventive Action after Closure Preventive Action and Continuous Improvement 7
J Potential Customers Asking for EIRs / 483s when evaluating a CRO for future work US Food and Drug Administration (FDA) 2
P FDA - Evaluating Substantial Equivalence in Premarket Notifications 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Quality Control Procedure and Procedure for Evaluating Sub Contractor Document Control Systems, Procedures, Forms and Templates 1
M Evaluating Vendor (Supplier) Products using SQC Statistical Analysis Tools, Techniques and SPC 6
K Evaluating different Startup Options in EU and MDD ISO 13485:2016 - Medical Device Quality Management Systems 4
S Trading Company - Evaluating Supplier Performance and Approved Supplier List ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
J The 510(k) Program: Evaluating Substantial Equivalence in Premarket Notifications 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
E Evaluating Lean Knowledge: Lean Philosophy Course for Production Engineering Students Lean in Manufacturing and Service Industries 1
A Evaluating an Integrated Management System - Dissertation Topic ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
optomist1 Evaluating Capability Indices with Minitab Using Minitab Software 7
C Trend Analysis - Evaluating Quality of Pricing - ANVOA or Std Dev? Statistical Analysis Tools, Techniques and SPC 25
W Re-Evaluating Corrective Actions - Recurrence of a Customer Complaint Nonconformance and Corrective Action 7
D Good source for Checking and Evaluating Control Plans needed FMEA and Control Plans 4
R EMP (Evaluating the Measurement Process) Studies for Bias Effect Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
J Evaluating a Regression Model Using the Constant Variance Assumption Six Sigma 8
Wes Bucey "Downsizing" ramifications - Evaluating and Interpreting the News World News 0
A Methods of evaluating compliance to ISO 14001 ISO 14001:2015 Specific Discussions 6
G 100% Sort Verification - Statistical Method for Evaluating Suspect Material Statistical Analysis Tools, Techniques and SPC 19
J Evaluating and Reporting the Results of Layered Process Audits Document Control Systems, Procedures, Forms and Templates 9
G Evaluating Software for GMP Criticality? Software Quality Assurance 3
M Evaluating adverse effect on device tested with out of tolerance instrument General Measurement Device and Calibration Topics 3
Q Evaluating Internal Audit Results Internal Auditing 24
P Rockwell, Brinell, Vickers Conversion - Evaluating Aluminum 6061-T6 and 6063-T6 General Measurement Device and Calibration Topics 11
U Evaluating the aspects... All judgement based or is there a more objective way? Miscellaneous Environmental Standards and EMS Related Discussions 1
D Evaluating competence on training for new ISO 13485 standard for employees ISO 13485:2016 - Medical Device Quality Management Systems 7
Q "Service" Vendor (Supplier) Evaluation - How are you evaluating suppliers? Supplier Quality Assurance and other Supplier Issues 5
N Evaluating Process Stability - Unstable Processes - Cpk/Ppk? Capability, Accuracy and Stability - Processes, Machines, etc. 6
Z Seeking GM standard GM9684P - Procedure for evaluating parting lines Customer and Company Specific Requirements 2
S Metrics for Evaluating Design process Design and Development of Products and Processes 2
C Evaluating software that measures Ppk, Cmk, Cpk, PPI, etc. Capability, Accuracy and Stability - Processes, Machines, etc. 4
H Good starting point for a new QC Manager? Evaluating Existing Procedures Document Control Systems, Procedures, Forms and Templates 21
Gman2 Evaluating training, needed for office personnel? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
G Evaluating Processes - Cycle Time Concepts - Three Levels for any process Manufacturing and Related Processes 3
C Evaluating the Effectiveness of Internal Audit Process Internal Auditing 16
Marc Evaluating 5.3 c - Quality Policy - Framework General Auditing Discussions 1
T Evaluating Customer Satisfaction ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 14
B Risk Anlysis for Evaluating then Voiding or Not Issuing CPAR's Nonconformance and Corrective Action 1
M ISO 9001:2000 - Evaluating Training Effectiveness and Why ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
C Can anyone suggest a means of evaluating a suppliers performance? Supplier Quality Assurance and other Supplier Issues 4
Raffy Evaluation Form - Re-evaluating suppliers for their performance Supplier Quality Assurance and other Supplier Issues 8
G Evaluating Training Effectiveness - 6.2.2 Competence, Awareness and Training ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 55
S Supplier Evaluation - Evaluating transport suppliers and equipment suppliers Supplier Quality Assurance and other Supplier Issues 2
D What exactly is needed on the subcontractor list for evaluating subcontractors QS-9000 - American Automotive Manufacturers Standard 4
D Evaluating Subcontractor On-time Delivery Misc. Quality Assurance and Business Systems Related Topics 3

Similar threads

Top Bottom