Explain the meaning of 8.2.4 Monitoring and Measurement of Product

A

Angelika

#1
Hello,

Can anybody explain the meaning of the following paragraphs of 8.2.4:

a) When the organization uses sampling inspection as a means of product acceptance, the plan shall be statistically valid and appropriate for use. The plan shall preclude the acceptance of lots whose samples have known nonconformities.....................

b) Product shall not be used until it has been inspected or otherwise verified as conforming to specified requirements, except when product is released under positive-recall procedures pending completion of all required measurement and monitoring activities.

What's the significance of the blue-marked sentences? What does these mean in practical terms?

:thanks:
 
Elsmar Forum Sponsor
D

D.Scott

#2
Re: 8.2.4 Monitoring and measurement of product

Hello,

Can anybody explain the meaning of the following paragraphs of 8.2.4:

a) When the organization uses sampling inspection as a means of product acceptance, the plan shall be statistically valid and appropriate for use. The plan shall preclude the acceptance of lots whose samples have known nonconformities.....................

b) Product shall not be used until it has been inspected or otherwise verified as conforming to specified requirements, except when product is released under positive-recall procedures pending completion of all required measurement and monitoring activities.

What's the significance of the blue-marked sentences? What does these mean in practical terms?

:thanks:
a) Whichever sampling plan you use the accept/reject decision must be based on zero defects. If any defects or nonconformities are found the entire lot must be rejected.

b) You may periodically need to release product to the production area before all the tests/results are completed. This is saying you must have a positive-recall procedure which is followed in that event. All the tests/inspections must be done and if a failure results, you must have a way to stop the product from being used in production.

Hope this helps.

Dave
 
D

Duke Okes

#3
Acceptance sampling plans include a sample size "n" and an acceptance number "c" This is saying c=0

Positive recall means you would be able to find all the material that you released before inspection, if you later find that the inspection results indicated the product was no good. In effect, it means some sort of traceability.
 
A

Angelika

#4
Thanks a lot, Duke and Dave. Your explanations are really good and absolutely clearly to understand - also to a non-technician like me! .:applause:

Angelika
 
Thread starter Similar threads Forum Replies Date
E Definition QUALITY 4.0 - Somebody here could explain the meaning of Quality 4.0? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
Ronen E Can anyone please explain this? (510k submission requirement) Other US Medical Device Regulations 14
A Please explain MDR Rule 11 to me EU Medical Device Regulations 67
R Explain what "design change" is to people new to the industry ISO 13485:2016 - Medical Device Quality Management Systems 9
Sidney Vianna Interesting Discussion Hello IAF. Are you listening? Please explain the inconsistency in your IAF Mandatory Documents (2019) ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 6
John Predmore Explain Quality Management System (QMS) for the uninitiated ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
I Trying to explain some of the Management Review Inputs (AS9100D) Management Review Meetings and related Processes 10
T From 21 CFR to IEC 60601 - Please explain IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
E IATF 16949 Clause of 8.4.3 - Approvals - Can you explain to me IATF 16949 - Automotive Quality Systems Standard 1
J Please Recommend books that explain how to understand IATF 16949 IATF 16949 - Automotive Quality Systems Standard 3
M Please explain the following Automotive Acronyms IATF 16949 - Automotive Quality Systems Standard 3
M Help trying to explain accuracy procedure General Measurement Device and Calibration Topics 1
S Please explain Medical Device Product Classification Rationale 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
C Can anybody explain h.2 equation of GUM? Measurement Uncertainty (MU) 3
M Shewhart Control Chart for SPC In Excel - Explain the yellow and red marked column Statistical Analysis Tools, Techniques and SPC 2
S Class III Sampling Plan - Explain AQL vs. 95%C & 90%R Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
B AS 9104/1 - Can anyone briefly explain me what AS 9104/1 calls for? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
B Please Explain Clause 8.3 in ISO 9001:2008 Nonconformance and Corrective Action 4
A Flowchart to explain the Medical Device Vigilance Reporting Process wanted EU Medical Device Regulations 4
A Customer Demands (MSA=Bias + GRR/2). Can somebody explain what it means? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
V Is there a form I can use to explain what I'm submitting PPAP for? APQP and PPAP 9
Sidney Vianna The GRI Report or Explain Campaign (Sustainable Development) Sustainability, Green Initiatives and Ecology 4
P EN ISO vs. ISO - Please explain to me EN ISO vs. ISO standards Other ISO and International Standards and European Regulations 3
R ISO 9001 and ISO 9004 - Can somebody briefly explain their difference? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
R Explain about fractional half 2^(k-1) and fractional quarter 2^(k-2) Using Minitab Software 1
A AQL Sample Sizes - Explain how Sample Sizes in an AQL table are calculated AQL - Acceptable Quality Level 4
L Please Explain Inspection Levels including C=0 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
D En 62366:2006 - Can someone explain what EN 62366:2006 covers? Other ISO and International Standards and European Regulations 3
J Please explain what formula is correct for "Mean and Range Control Chart" Statistical Analysis Tools, Techniques and SPC 1
V Define vs. Determine vs. Document - Explain ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
A Calibration vs. Inspection - Please explain the difference General Measurement Device and Calibration Topics 3
D Two Gauges (Gages) - Two measurements correlation I do not know how to explain Reliability Analysis - Predictions, Testing and Standards 4
R How would you explain DoF (Degrees of Freedom) to a non-statistician? Statistical Analysis Tools, Techniques and SPC 3
V The GM asked me to explain to the board about AQL (using layman terms). AQL - Acceptable Quality Level 11
V Can you explain about "QUALITY FOUNDATION" ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
F Explain the two different methods of coding of categorical predictors Software Quality Assurance 1
V Can you explain about "MATERIAL REVIEW BOARD" (MRB)? Misc. Quality Assurance and Business Systems Related Topics 13
Q REACH - Is it not the same as RoHS /IMDS? Can someone explain? RoHS, REACH, ELV, IMDS and Restricted Substances 1
B Recommendation for a book to Explain Control Charts Book, Video, Blog and Web Site Reviews and Recommendations 6
R Can you explain Six Sigma to me? Six Sigma 12
D How to Prove and Explain to Consultant (Internal Auditor) and Manager? Internal Auditing 7
P Criteria for operator's readings at setup - Seeking help to explain chosen limits. Statistical Analysis Tools, Techniques and SPC 4
A Theory of Constraints - Can anyone explain something? Six Sigma 6
G Please explain to me what .asp does Software Quality Assurance 5
C Explain to me the differences between ISO9000 and TQM ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
S Cpk Help needed - Explain to me where I made a mistake Capability, Accuracy and Stability - Processes, Machines, etc. 8
A Please explain to me in laymans terms how to calculate a single T-test Six Sigma 14
ScottK Can someone explain the marketing behind this ad? Coffee Break and Water Cooler Discussions 21
P Layered Process Audit & the Document Audit - Can anyone explain to me, Please? Process Audits and Layered Process Audits 2
Manix GM GP9 procedure - [email protected] - Can anybody explain the figure "% True Scrap"? Document Control Systems, Procedures, Forms and Templates 2

Similar threads

Top Bottom