Extent of Gage R&R necessary on two Digital Height Gages

A

Anonymous12

#1
All,

I am in the process of completing the R&R on two digital height gages: Brown and Sharpe MicroHite and a Fowler Sylvac Z_Cal 300.
There is a debate as to how extensive the R&R has to be on these particular devices.
In use, parts are measured down, up, using sweeps, and determining the distance between the center of circles.
For the R&R is it necessary to look at more than down?

Thank you
 
Elsmar Forum Sponsor

Miner

Forum Moderator
Staff member
Admin
#2
Probably.

Down and up might be similar, but distance between center of circles will almost definitely be different. Sweeps are very likely to be different.

I would run the full gamut on one of the units to see whether there are differences. If you find similarities, you could combine on the second machine.
 
Thread starter Similar threads Forum Replies Date
C 8.5.1.1 Control of Equipment, Tools, and Software Programs - Questions about the extent of control of NC programs AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
J Extent of 2017/745: providing 3rd party mass produced devices to NHS patients EU Medical Device Regulations 0
M SI #7 8.4.2.1 Type and extent of control_supplemental IATF 16949 - Automotive Quality Systems Standard 3
J Extent of Validation - New machine installed in manufacturing ISO 13485:2016 - Medical Device Quality Management Systems 8
A IATF Sanctioned Interpretation No. 7 - Type and Extent of Control (supplemental) IATF 16949 - Automotive Quality Systems Standard 4
DuncanGibbons To what extent are NASA standards applicable to commercial aviation? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
I AS9100 8.4.2 Type and Extent of Control - External provider test reports Manufacturing and Related Processes 24
B Documented process for type and extent of control IATF 16949 - Automotive Quality Systems Standard 6
Q ISO 9001:2015 - Extent of Policy and Scope with Context and Interested Parties ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
S Complying with IATF 16949 Cl. 8.4.2.1 - Type and extent of control IATF 16949 - Automotive Quality Systems Standard 1
E IATF 16949 Cl. 8.4.2.5 - Supplier Development Type and Extent IATF 16949 - Automotive Quality Systems Standard 2
N Extent of Product Traceability Required by ISO 13485 (Low Level Class I Devices) ISO 13485:2016 - Medical Device Quality Management Systems 3
V What are the criteria for determining extent of requalification (hardware upgrade) ISO 13485:2016 - Medical Device Quality Management Systems 2
I Definition Insubordination in Organizations - Definition, extent; vis-a-vis employee's rights. Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 14
E Extent of modification to be considered as Modified Adoption Other ISO and International Standards and European Regulations 1
L Can Extent of Documentation differ due to the Competence of Personnel? ISO 13485:2016 - Medical Device Quality Management Systems 9
M TS 16949 Cause 7.4.1: Type of Control vs. Extent of Control (Definitions) IATF 16949 - Automotive Quality Systems Standard 5
R 820.50 (A) (2)Define the Type and Extent of Control to be exercised over Vendor Misc. Quality Assurance and Business Systems Related Topics 5
P Risk Management - To what extent is Risk Management required by AS9100? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 17
J Extent of information required in COC (aka C of C and Certificate of Conformance) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
O Information on the extent of Statistics in the Six Sigma Green Belt Exam Professional Certifications and Degrees 9
R Extent of Recognition of ISO 10993-1 US Food and Drug Administration (FDA) 5
R FDA recognition standard - Extent of Recognition 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
T Raw Material Verification - AS9100 Rev. B - 7.4.3 - To what extent must a company go? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
T Traceability SOP Audit Finding - SOP does not describe the extent of the traceability ISO 13485:2016 - Medical Device Quality Management Systems 15
S Extent of Site manager (SM) Commitment - Upper Management issues Quality Manager and Management Related Issues 8
hogheavenfarm Extent of certification - Companies sharing manufacturing space in a building ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Sidney Vianna Outsourced Processes - Type and Extent of Control to be Applied - ISO 9001:2008 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 40
F Need help about being more socialized - Hard to fit into my groups to some extent Career and Occupation Discussions 4
M Document Control Database - To what extent do document control requirements apply? Document Control Systems, Procedures, Forms and Templates 12
C To what extent should ppap be repeated according to the European Union ELV? APQP and PPAP 3
G Document Control - Extent of Responsibility Document Control Systems, Procedures, Forms and Templates 7
F Controlled Forms - To what extent do forms need to be controlled? Document Control Systems, Procedures, Forms and Templates 41
J To what extent does Emergency Prepardness need to be extended Miscellaneous Environmental Standards and EMS Related Discussions 2
T Plug Gage Calibration Calibration and Metrology Software and Hardware 1
L Gage R&R TMV Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S MSA for attribute relation gage Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
E Zero part to part variation - Gage R&R project Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
M Gage R&R and right way to measure Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
L Gage RandR on automated equipment. IATF 16949 - Automotive Quality Systems Standard 7
B Gage calibration frequency, ISO and IATF - What are the requirements Calibration Frequency (Interval) 3
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
R Determining Uncertainty from Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
C Correct Calibration Method for Dial Depth Gage General Measurement Device and Calibration Topics 6
C Gage Block Wringing General Measurement Device and Calibration Topics 3
B Gage R&R with NDC=1 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
S Type 1 Gage R&R or something else? Reliability Analysis - Predictions, Testing and Standards 6
G Should I perform Gage R&R only at the beginning of a new project? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
G Gage R&R - Where am I going wrong? Part of a FAIR submission (Aerospace) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2

Similar threads

Top Bottom