Factors Influencing Implementation of Risk Management Policies

What is the most influencing factor for implementation a risk management policies.

  • Customer requirement.

    Votes: 2 28.6%
  • Avoiding product/process failures (robustness/predictability of quality.)

    Votes: 3 42.9%
  • Knowledge management tool-capture experience/expertise gained-to ensure the continuous improvement

    Votes: 2 28.6%

  • Total voters
    7

v9991

Trusted Information Resource
#1
These factors indicate the approach of management.... from short-term/immediate requirements to holistic approach which puts the systems/processes on the path of continuous improvement. Feel free to add any other driving factors behind adopting/selecting risk management tools/policies.
 
Last edited:
Elsmar Forum Sponsor
J

jasonb067

#2
I said customer. Not because that is the way is should be but because it seems to be the situation most of the time.
 

v9991

Trusted Information Resource
#4
I agree with Jason: what it is and what should be are not always the same.
I agree... current state of implementation is mostly influenced by knowledge/vision and short-term goals of people/systems-processes within ...what are the ways of driving them towards "desired state";

one such way could be establishing right-metrics... focusing on the continuous improvement not just measuring/ensuring for implementation of risk tool for every product/process/investigation...BUT, to measure something which reflects continuous improvement & the implementation process etc.,

an example which could (almost!) explain the above point is, if, we measure a kid-education on competition (being first, scoring high etc.,) then he is going to get better at knowledge/numbers; but may not always be good for application/practice of that knowledge (this is real purpose of the education right!). Same is the way for systems/processes;

right focus aeas ---> right measures--->right results!


(probably i will have to initiate separate discussion on this topic of ensuring continuous improvement, but pl. share your thoughts which are specific to risk management policies.)
 
Last edited:
Thread starter Similar threads Forum Replies Date
M Regression Analysis Help - Factors influencing a Dependent Variable Using Minitab Software 7
G What to do with correction factors overlooked by an accredited standard (6.4.11)? ISO 17025 related Discussions 5
P Human Factors / Usability validation in the time of COVID Human Factors and Ergonomics in Engineering 17
C Kaizen Events - Factors Affecting Failure Lean in Manufacturing and Service Industries 13
D Is Human Factors testing mandatory for a 510(k) submission? Human Factors and Ergonomics in Engineering 16
J Selecting factors for screening DoE design Statistical Analysis Tools, Techniques and SPC 8
T Determination of TENSION SAFETY FACTORS - Table 21 IEC 60601-1 Other Medical Device Regulations World-Wide 5
J DoE (Design of Experiments) - Multiple responses with different factors Using Minitab Software 2
P Usability/human factors engineering requirement (standard) for IVD medical device Other Medical Device Related Standards 2
A Interesting Discussion Human Factors as Root Cause AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
P Global medical device human factors/usability requirement IEC 62366 - Medical Device Usability Engineering 3
M Medical Device News FDA News - 14-09-18 - Benefit-Risk Factors to Consider for Substantial Equivalence Other US Medical Device Regulations 0
H Minitab 15 - Factorial Design - 3 factors: 4x3x2 - How to? Using Minitab Software 4
P Interesting Discussion Addressing Human Factors in Corrective Action AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 23
M I have 3 different factors - DOE help Statistical Analysis Tools, Techniques and SPC 3
A How do I create a 3^k factorial design with factors be treated as continuous where I Using Minitab Software 0
V Screening DOE with 7 Input factors and 4 responses - Significant factors Using Minitab Software 1
H Taguchi mixed model DoE [L16 (4^3 2^6): factors interaction and ANOVA calculation Using Minitab Software 3
S Taguchi Design with ANOVA - 3 factors each with 3 levels Quality Assurance and Compliance Software Tools and Solutions 13
R Is there any Excel .xls Spreadsheet available for DOE with 3 factors? Six Sigma 1
T New EU Medical Device Regulations - Q1/2 2017 and Human Factors Other Medical Device Related Standards 10
M New MHRA guidance on Human Factors - Usability Engineering IEC 62366 - Medical Device Usability Engineering 1
L BSI White Paper on Human Factors/Usability Engineering IEC 62366 - Medical Device Usability Engineering 12
M Requiring action on factors alone of RPN in FMEA APQP and PPAP 7
S IEC 62366 vs. FDA Human Factors Requirements Human Factors and Ergonomics in Engineering 2
S DOE Analysis - Experiments with 5 Factors Statistical Analysis Tools, Techniques and SPC 11
Ajit Basrur FDA issues Guidance Document - Benefits-Risks Factors to consider for 510(K) US Food and Drug Administration (FDA) 1
C MU (Uncertaincy of Measurements) definition and MU Factors Measurement Uncertainty (MU) 4
E ANOVA for Taguchi method - Four factors and three levels and nine runs (Minitab) Using Minitab Software 6
M How to compare 2 independent samples having 3 factors 3 levels Statistical Analysis Tools, Techniques and SPC 5
Y Taguchi Design with 6 levels and 3 factors in Minitab Using Minitab Software 11
J When to use k-Factors vs TUR Measurement Uncertainty (MU) 6
R Taguchi design for 3 level 4 factors Using Minitab Software 12
V Selection of Design - 8 Factors, almost sure about Target Levels Using Minitab Software 8
R 4 Factors 3 Level DOE to determine which factors are significant Using Minitab Software 2
C Cost Factors of Iso 8 vs. ISO 8/9 Cleanroom Other Medical Device and Orthopedic Related Topics 2
M Human Factors Testing for CE Marking of a Cosmetic Device CE Marking (Conformité Européene) / CB Scheme 9
Z A DOE in Minitab - 3 factors and 3 levels for each factor Using Minitab Software 12
J What are the Design Factors in APQP? APQP and PPAP 3
Q Risk Factors Checklist identifying the Risks for meeting the Customer Indent AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
B DOE Question: 3 factors with 2 levels and 1 factor with 3 levels Six Sigma 2
C Analyzing 3 Factors 3 Levels using Minitab Using Minitab Software 9
J Metal Stampers Feasibility form that includes Risk Factors IATF 16949 - Automotive Quality Systems Standard 5
J DOE Analysis Experiment, 5 factors, 4 factors having 3 levels, and 1 factor having 5 Using Minitab Software 38
D What Factors to consider to determine the Number of Auditors Internal Auditing 3
E 5^2 DOE (Design of Experiments) with 3 Replications, 5 Levels 2 Factors Statistical Analysis Tools, Techniques and SPC 6
N Applying Correction Factors to Furnaces Manufacturing and Related Processes 5
D Resolution V Factorial Design with 5 factors (3 numerical and two text) Using Minitab Software 1
N CE Mark and Third Party Companies Evaluation Factors CE Marking (Conformité Européene) / CB Scheme 5
L DOE with 2 factors (3,4 levels) and optimized factor Using Minitab Software 12

Similar threads

Top Bottom