Failure Analysis Report Template

C

coastalbull

#11
Thanks! I just wanted to see an example of a form to get an idea of how to set one up/write one for my own use. This helped a lot!!! Thanks again.
 
Elsmar Forum Sponsor

Cari Spears

Super Moderator
Staff member
Super Moderator
#12
Our very simple one is TCF.13.02 in this post: Nonconformance Procedure Model or Example

The only thing is that we fill this out when we evaluate the unit when it's returned. The customer communicates the problem via their own form or email or phone conversation - we don't have a failure analysis form that we send to them to fill out.
 

Jim Wynne

Staff member
Admin
#14
I don't know why I didn't notice this two years ago when this thread was initiated, but I think a fitting acronym may be formed for the Failure Analysis Report Template. :tg:
 
#15
Hello,
I have the same issue, we run a multiphase pumps, I need to prepare for each failure an analysis report -AFR, could you kind as to share with me a template?
alos sometimes we just do kind of job report for machines when we decide to change a shaft's pitch, we call this Job report.

Many thanks in advance
 

Jim Wynne

Staff member
Admin
#16
Hello,
I have the same issue, we run a multiphase pumps, I need to prepare for each failure an analysis report -AFR, could you kind as to share with me a template?
alos sometimes we just do kind of job report for machines when we decide to change a shaft's pitch, we call this Job report.

Many thanks in advance
Look at this post in this thread.
 
#17
Jim Wynne,

I thank you very much for your prompt replay, I have already checked what is written in that thread, but I think there is a particularity that I used to write a Failure Report to describe the failure of Mechanical seal, bearing, or sometimes Drive and Driven shafts, but especially Mechanical seal failures occurred several time, the problem was due to the Rotary and stationary ring, but as we have not a chose to change the supplier for the moment, we kept writing FR,
I wanted a quick format to do the job.
 
Thread starter Similar threads Forum Replies Date
S Failure Analysis Report for Project Problem Solving, Root Cause Fault and Failure Analysis 3
T Root Cause Failure Analysis - Not following Customer packaging Specification Problem Solving, Root Cause Fault and Failure Analysis 9
R How to properly use Survival Analysis to predict time to machine failure Reliability Analysis - Predictions, Testing and Standards 0
P Electronic component failure analysis turnaround time Reliability Analysis - Predictions, Testing and Standards 0
L First Time Completing a 5 Why/RootCause Failure Analysis Nonconformance and Corrective Action 8
P UFMEA - Use Failure Mode Effects Analysis FMEA and Control Plans 7
S Seeking Feedback on ASQ Guide to Failure Mode and Effect Analysis FMEA and Control Plans 2
T Weibull analysis of life time test of 8 electric motors until failure Reliability Analysis - Predictions, Testing and Standards 9
M Failure Analysis on Cracking SMT Capacitors Problem Solving, Root Cause Fault and Failure Analysis 7
A Repairable System Reliability Analysis: Uptime/Downtime Hours, Failure Modes Data Reliability Analysis - Predictions, Testing and Standards 2
S Root Cause Analysis of Motor Performance Failure Manufacturing and Related Processes 5
Q Failure Analysis Procedure for Electro-Mechanical Devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
Moncia How to do a Root Cause Failure Analysis ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 72
A FPA (Failure Prevention Analysis) and FMA (Failure Mode Avoidance) info wanted FMEA and Control Plans 6
S EMI/EMC Failure Cause Analysis per IEC 60601 IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
J Supplier Warranty and Product Responsibility including Failure Analysis Design and Development of Products and Processes 9
Marc A NASA Failure Analysis of the April 28 2010 failed balloon launch World News 0
Z Root Cause Failure Analysis for NADCAP AMS2750D Audit Finding help wanted AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
B Service Contract for VMP for our failure analysis and material science lab question US Food and Drug Administration (FDA) 1
J Root Cause Failure Analysis of a Shipping Error Problem Solving, Root Cause Fault and Failure Analysis 37
Marc --> Related Forum - Root Cause and Failure Analysis Nonconformance and Corrective Action 0
Marc --> Related Forum - Root Cause and Failure Analysis Preventive Action and Continuous Improvement 0
R Difference between approaches of Failure Analysis and of Failure Prevention Quality Tools, Improvement and Analysis 3
S The difference between NCR vs. FRACAS (Failure reporting, analysis, and corrective action system) Nonconformance and Corrective Action 4
S Process Failure Mode Effects Analysis (PFMEA) Basics FMEA and Control Plans 4
M PAA (Process Assurance Assessment) vs. FMEA (Failure Modes and Effects Analysis) FMEA and Control Plans 3
U Conference on Failure Analysis Misc. Quality Assurance and Business Systems Related Topics 0
Q FMEA (Failure Modes and Effects Analysis) and Control Plan Process Diagrams FMEA and Control Plans 3
S Basic PFMEA (Process Failure Mode Effects and Analysis) Questions FMEA and Control Plans 22
S Corrective Action vs. Failure Analysis - Corrective Action for Every Defect Found? Nonconformance and Corrective Action 5
A Failure Analysis - can anyone recommend a method to use other than '5-Whys"? Quality Tools, Improvement and Analysis 8
E Failure Analysis on our Manufactured Goods ISO 13485:2016 - Medical Device Quality Management Systems 3
U Failure of Root Cause Analysis Problem Solving, Root Cause Fault and Failure Analysis 17
R Failure analysis process or activity need to be audited? Internal Auditing 3
D ISO 14971 Risk Analysis - Effects of component failure on the patient ISO 14971 - Medical Device Risk Management 7
A FRACAS (Failure Reporting, Analysis and Corrective Action System) software Quality Assurance and Compliance Software Tools and Solutions 15
P Sample for Failure Analysis - How to conduct Failure Analysis - Criteria Reliability Analysis - Predictions, Testing and Standards 4
D FRACAS (Failure Reporting, Analysis and Corrective Action System) Form - MIL-HBK-2155 Document Control Systems, Procedures, Forms and Templates 2
S Root Cause Analysis and/or Failure Investigation Training Problem Solving, Root Cause Fault and Failure Analysis 1
K How to apply QC (Quality Control) in Failure Analysis Laboratory? General Measurement Device and Calibration Topics 1
J What determines the contents of an FMEA (Failure Modes and Effects Analysis)? FMEA and Control Plans 12
C Training for RCA - Root Cause Failure Analysis Problem Solving, Root Cause Fault and Failure Analysis 9
1 Director of Reliability & Failure Analysis - Semiconductors Reliability Analysis - Predictions, Testing and Standards 0
M Family or individual PFMEA's (process failure modes effects analysis)? FMEA and Control Plans 3
A What is FRACAS? Failure Reporting Analysis and Corrective Action System AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 16
Wes Bucey "Failure Mode Effect Analysis" 2nd Ed. by D.H. Stamatis Book, Video, Blog and Web Site Reviews and Recommendations 4
T Process FMEA (Failure Modes Effects Analysis) Severity Rating and RPN IATF 16949 - Automotive Quality Systems Standard 17
C Root Cause Failure Analysis Problem Solving, Root Cause Fault and Failure Analysis 3
J Seeking: FMEA (Failure Modes Effects Analysis) Training Advice Training - Internal, External, Online and Distance Learning 10
Marc An Interesting Failure Analysis - Ejection Seat Failure Nonconformance and Corrective Action 8

Similar threads

Top Bottom