First Piece Inspection classified as a Key Process Input

Elsmar Forum Sponsor

Chennaiite

Never-say-die
Trusted Information Resource
#2
For a PFMEA:

Would a First Piece Inspection be classified as a key process input, current process controls or both?


:frust:
It's definitely a process control. I don't see any reason why it could be seen as key process input of course if that means key inputs to the process.

Interestingly, First piece inspection, if used to confirm process setting condition as a validation of sorts, is seen as current prevention control.
 

dsanabria

Quite Involved in Discussions
#3
For a PFMEA:

Would a First Piece Inspection be classified as a key process input, current process controls or both?


:frust:
First Piece Inspection is just that - the first piece of production that validates that your process meets the requiremnts of the customers. It does not tell you how your production / process are functioning or deviating nor does it give you any indication if your process is effective - it just tells you that is ready to proceed.
 
Thread starter Similar threads Forum Replies Date
S Improving Quality inspection gate in one piece flow manufacturing process Manufacturing and Related Processes 0
J AS9100D Sections related to 1st Piece and In-Process Inspection Manufacturing and Related Processes 15
5 First Piece Inspection (Primarily Standard Machining) Question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
Q Effective 1st Piece Inspection Sign Off Procedure Quality Manager and Management Related Issues 8
M Example of a typical First Piece Inspection Procedure Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
B CNC Machining Shop still heavily relies on First Piece and Final QC Inspection Manufacturing and Related Processes 5
D First Piece Set-Up Inspection question Manufacturing and Related Processes 11
jkuil Recording of First Piece Inspection to meet 21 CFR 820.80e and ISO 13485 7.5.1.1 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
J Software or template to manage first piece, in process and final inspection reports Software Quality Assurance 2
K First Piece vs. First Article - QC Inspection Terminology Inspection, Prints (Drawings), Testing, Sampling and Related Topics 24
P No In-process or first piece inspection - Final Inspection ONLY! Am I wrong? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 37
P Is the first piece inspection method supposed to be in the Control Plan? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 18
D Does every piece of equipment used in a laboratory need to have an IQ protocol written and executed? ISO 13485:2016 - Medical Device Quality Management Systems 1
S "X-MR charts do not separate piece-to-piece repeatability of the process" Statistical Analysis Tools, Techniques and SPC 2
S Setting up the process - First piece inspections Statistical Analysis Tools, Techniques and SPC 3
S If a piece of software receives approval as part of a medical device system Canada Medical Device Regulations 5
K Gage R on a 10 Piece Sample with a CMM using Minitab Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
A Simple 125 piece part Capabilty Excel .xls sheet to calculate Cpk Capability, Accuracy and Stability - Processes, Machines, etc. 3
H Do we need all three AS9102 forms if we manufacture only Piece Parts? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
C One sample piece from standard production? AS9102 FAIR questions AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
N Designing an attribute MSA for a new piece of metrology equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
CalRich Retention of First Piece from each Production Run IATF 16949 - Automotive Quality Systems Standard 11
D Distribution of a Kit composed of Piece Parts from several Manufacturers EU Medical Device Regulations 3
8 Single Piece Flow Game - Understanding the Principles and Logic of Single Piece Flow Lean in Manufacturing and Service Industries 3
M About First and Last Piece Procedure & Marking, Packing, Traceability IATF 16949 - Automotive Quality Systems Standard 7
M TS 16949 Sampling Plan Information - List the specific dimensions for each piece? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
C Traceability without Working Order - Batch to One Piece Flow AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
N Nonconforming Product - 1st Piece Rejection Nonconformance and Corrective Action 3
R Control on Setting piece mix-up - Are there any fool proof systems? Quality Tools, Improvement and Analysis 2
R Anyone know how to establish one piece flow in apparel industry? Lean in Manufacturing and Service Industries 9
ScottK Inspecting surface finish on SS on a piece that can't be measured with current equip. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T Employee home piece work and supplier control ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 22
K Chrysler requirements for First Piece Approval IATF 16949 - Automotive Quality Systems Standard 3
J Process Capability Sheet for a short term 30 piece study needed Statistical Analysis Tools, Techniques and SPC 1
Y Implementing One Piece Flow Lean in Manufacturing and Service Industries 9
C Cost per Piece of Powder Painted Part Manufacturing and Related Processes 3
Q Teeth Sharpness Measurement - Broaching into a flat aluminum piece General Measurement Device and Calibration Topics 7
S Calibration Labels Per Piece or is a Listing Acceptable? General Measurement Device and Calibration Topics 4
K Looking for some Quality Catch Phrases - First Piece and Last Piece Displays Document Control Systems, Procedures, Forms and Templates 34
B Should 1st Piece Process be a Control or a Line Item in the Control Plan FMEA and Control Plans 10
B ISO10012:2003 Question - Choosing or assessing the capability of a piece of equipment Other ISO and International Standards and European Regulations 1
D What does 1st piece (1st Article) mean to a lay person like myself? IATF 16949 - Automotive Quality Systems Standard 12
A The Numeracy Piece - Word is new to me, does anyone know about it? Statistical Analysis Tools, Techniques and SPC 1
A Customer wants to invoke AS9103 on one time buy of 25 piece order. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
A Customer wants AS9103 applied to 30 piece order. Quality Tools, Improvement and Analysis 2
M Management Review: "Powerful Tool" (ISO 9004 5.6.3) or Redundant Piece of Paper? Management Review Meetings and related Processes 17
S Can a trained person in our lab "certify" a piece of steel gauge General Measurement Device and Calibration Topics 3
M Single piece APQP APQP and PPAP 1
M Document Evidence for One Piece Flow Processes Misc. Quality Assurance and Business Systems Related Topics 8
M Determining a tolerance value for Measuring devices in-house inspection General Measurement Device and Calibration Topics 12

Similar threads

Top Bottom