FMEA Manual - Page 53, Table 8 says Detection Ranking

Have you revisited the FMEA based on 3rd edition requirement

  • YES

    Votes: 1 100.0%
  • NO

    Votes: 0 0.0%

  • Total voters
    1
  • Poll closed .
A

Andrews

#1
Fmea

Sub : Detection rating

1. The FMEA manual Third edition Page 53,Table 8 says detection ranking of 2 can be assigned where "error detection is done in subsequent operations by multiple layers of acceptance: supply,select,install,verify".Can anyone please tell me what it means with an example. Likewise what detection ranking must be given in cases where "setting approval" is done to detect the failure and what ranking in the case of receiving inspection?

2. Does any of you use a format for collecting the nonconformance data and customer complaints data for assigning occurence rating?If so, can you share it with us?

3.How frequently do you review the nonconformance data and customer complaints data to change the FMEA.

4.How many of you have revisited the FMEA's,that were prepared earlier, in line with the 3rd edition requirement.
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
As a quickie to #1, Company X receives part A and does no inspection. Part A is one component of a sub-assembly. The 'item' contains 4 sub-assemblies. When complete, each sub-assembly is tested. If Part A was defective the sub-assembly test would not work thus the part was indirectly 'inspected' after its incorporation in the sub-assembly. On the same note, it may be final test of the complete 'item' before it is 'indirectly' tested.

More later - gotta get back to 'work'....
 
R
#3
On point 3 -
I would link the frequency of review to repetitive issues. If you do find that some issues are coming up time and again, it is the right time to review FMEA.
 
Thread starter Similar threads Forum Replies Date
S PFMEA Help - Page 39 in the 3rd Ed. of the FMEA Manual FMEA and Control Plans 3
M PFMEA Detection Evaluation Criteria - Visual Check - Page 52 of the AIAG FMEA manual FMEA and Control Plans 2
B AIAG/VDA’s FMEA Manual Is a Major Advance (my take on this subject) FMEA and Control Plans 2
R What are the changes in 5th Edition of FMEA manual? FMEA and Control Plans 6
C FMEA Process assessment In the Draft for the AIAG/VDA FMEA Manual is gone FMEA and Control Plans 0
M MANUAL FMEA VDA VDA Standards - Germany's Automotive Standards 1
R Information on the roll out of the new harmonized DRAFT FMEA AIAG/VDA manual IATF 16949 - Automotive Quality Systems Standard 4
Marc When will Revision 5 of the AIAG FMEA Manual be released? FMEA and Control Plans 93
N AIAG 4th ed. FMEA Manual "Fit" Changed to "Appearance" - Fit severity? FMEA and Control Plans 2
S FMEA Manual aimed at Low Volume Fabrication Industry FMEA and Control Plans 1
P Occurrence Rating in AIAG FMEA Manual 4th Edition FMEA and Control Plans 5
M AIAG FMEA Manual Request FMEA and Control Plans 9
S Changes made in Rev 4 of FMEA Reference Manual FMEA and Control Plans 1
M DFMEA Detection Ranking in AIAG FMEA Manual 4th Ed. - Explanation wanted IATF 16949 - Automotive Quality Systems Standard 6
K Design FMEA Detection Scoring - FMEA 3rd edition manual FMEA and Control Plans 7
Chennaiite FMEA Severity Rating for Potential Manufacturing Effect mentioned in the FMEA manual FMEA and Control Plans 9
P AIAG FMEA manual 4th edition - Problem with Appendix C FMEA and Control Plans 3
T RPN of Action Results per the AIAG FMEA manual FMEA and Control Plans 5
U AIAG's FMEA Manual 4th Edition Released - 2nd July 2008 FMEA and Control Plans 77
R AIAG's FMEA Manual 4th Edition pushed back to 1st quarter 2008 FMEA and Control Plans 16
S Has the AIAG published the latest FMEA manual yet? FMEA and Control Plans 2
J Changes to AIAG's FMEA manual to happen in the 3rd quarter of 2007 FMEA and Control Plans 10
K AIAG FMEA Manual - New version in June 2007? FMEA and Control Plans 6
P Bulk Materials PPAP / FMEA - Appendix F of the PPAP manual APQP and PPAP 1
C Is Risk Assessment Still Necessary? The AIAG FMEA Manual does not address FMEA and Control Plans 1
A Sae J1739:2002 - Is it different from the AIAG's latest FMEA manual? FMEA and Control Plans 1
J FMEA Handbook 2019 IATF 16949 - Automotive Quality Systems Standard 3
J Process FMEA Template with examples - Cold and Hot Forged components FMEA and Control Plans 2
B Why the Greek god Hephaestus should have done a design FMEA (DFMEA) on his giant robot APQP and PPAP 1
P Design FMEA - Detection Rating criteria ISO 14971 - Medical Device Risk Management 3
J Which OEM or customers are now requiring the new AIAG/VDA FMEA format? FMEA and Control Plans 0
C AIAG/VDA FMEA - Is the new better? FMEA and Control Plans 0
I Does anybody use Detection in medical device Design FMEA? ISO 14971 - Medical Device Risk Management 18
P VDA AIAG FMEA - Slides for Quality Audience FMEA and Control Plans 4
P Design FMEA for Industrial Machinery FMEA and Control Plans 3
B AIAG-VDA FMEA - When the new format will be required FMEA and Control Plans 5
D Where does "as far as possible" stop? FMEA - EN 14971 ISO 14971 - Medical Device Risk Management 29
M Risk and Corrective actions - Currently no FMEA's - Car systems Risk Management Principles and Generic Guidelines 8
Jimmy123 Example of a P-Diagram for Process FMEA - Uncontrollable noises FMEA and Control Plans 39
Jimmy123 FMEA - Preventive vs Detection Control FMEA and Control Plans 7
L Which one is more important for FMEA CC or SC, FMEA and Control Plans 6
G FMEA financial benefits APQP and PPAP 2
M Foundation FMEA: what is it? FMEA and Control Plans 15
eule del ayre Merging FMEA and Quality Control Process Flow FMEA and Control Plans 0
K AIAG/VDA FMEA & Process Control Plans FMEA and Control Plans 0
D FMEA-MSR in the AIAG-VDA Aligned Handbook - What is it? FMEA and Control Plans 4
bobdoering Catching up on the new FMEA book! Funny Stuff - Jokes and Humour 2
bobdoering AIAG VDA FMEA Handbook - 2019 - something familiar about this.... FMEA and Control Plans 37
S New AIAG FMEA Process - How to complete the new format FMEA and Control Plans 32
C FMEA - Multiple function failures considerations FMEA and Control Plans 3

Similar threads

Top Bottom