SBS - The best value in QMS software

FOC (3 lots) - First of Code - Are you still doing 3 lots for FOC?

MasterBB

Involved In Discussions
#1
First of Code...

I am looking for an article/paper explaining the omission of using 3 lots for FOC..

To my understanding; this requirement is no longer valid.

Are you still doing 3 lots for FOC?

If not, what is your current practice/success stories to share.

Any documents/procedures would be helpful to share.
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2
Anyone "in the know" in this field with comments?
 
Thread starter Similar threads Forum Replies Date
K 510k FDA review, will they accept Biocompatibility result generated using feasibility product lots? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4
K Analysis variation among the lots during cpk calculation. Design and Development of Products and Processes 1
A Gauge Study for Small Lots Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
V 3 PQ lots mentioned as requirement in PPAP. Is this necessary? APQP and PPAP 2
N FDA Traceability Requirements - Component lots ISO 13485:2016 - Medical Device Quality Management Systems 2
lilybef Number of lots required for stability testing of a Class II device in the 510(k) Qualification and Validation (including 21 CFR Part 11) 3
L Why is initial production units, lots, or batches, or their equivalents required for Design Validation? US Food and Drug Administration (FDA) 3
Q Is it acceptable to mix components from two different lots into an assembly? ISO 13485:2016 - Medical Device Quality Management Systems 1
C Sampling plan for destructive tests on small lots ISO 13485:2016 - Medical Device Quality Management Systems 20
S Labeling for Validation Lots Products EU Medical Device Regulations 5
D Number of Manufacturing Lots for Process Validation Manufacturing and Related Processes 10
T Combining multiple lots of the same raw component for packaging or kitting 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
K Sampling Plan for Small Lots of Single Use Items Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
Ronen E Covidien recalls some Monoject Insulin Safety Syringe lots Other Medical Device and Orthopedic Related Topics 0
Ronen E Ethicon recalls some ECHELON 60 ENDOPATH? STAPLER Endoscopic Linear Cutter lots Other Medical Device and Orthopedic Related Topics 0
Ronen E Moog Medical Devices Group is Recalling certain Lots of IV Sets Other Medical Device and Orthopedic Related Topics 1
V Sample Size for Attribute Data - Large Production Lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T How to calculate AQL on Small Lots AQL - Acceptable Quality Level 1
A Looking for a wordsmith - Little compensation - Lots of appreciation! General Auditing Discussions 8
T Sampling Plan for Small Lots between 20 and 100 or so units Statistical Analysis Tools, Techniques and SPC 1
A What is a good Sampling Plan for LARGE Lots of Supplier Components Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
M Zero Acceptance Number Sampling Plans for Isolated Lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
B Addressing Lots that were measured with Out of Tolerance Gage Pins Nonconformance and Corrective Action 5
N Re-Packaging and Re-Labeling Bulk Lots of Class II Medical Devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
P Testing 3 Manufacturing Production Lots EU Medical Device Regulations 4
N AQL (Acceptable Quality Level) Sampling Plan for Small Lots AQL - Acceptable Quality Level 8
T Partial Shipping of Lots - Shipping of product prior to the lot being completed ISO 13485:2016 - Medical Device Quality Management Systems 4
F Determining the Number of Samples for receiving large lots of wire? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Silver Plating (Lots of questions) Manufacturing and Related Processes 8
A Traceability and Control of Manufacturing Lots IATF 16949 - Automotive Quality Systems Standard 7
Z Tracking Lots for Reduced and Tightened Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
D Samples from Lots of Incoming Raw Materials - Sampling Protocol Help Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
D Device History Record - Single file for each lot with all the lots history? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9
K Reproducibility between different lots using minitab Using Minitab Software 1
A Combining Lots under ANSI/ASQC Z1.4 Inspection Sampling Plan Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
Marc Telcos: The Internet Will Collapse If The Gov't Doesn't Gives Us Lots Of Money After Work and Weekend Discussion Topics 0
I Traceablity of Small Part Lots Supplied to Production taken from Large Lots? Lean in Manufacturing and Service Industries 7
R Sample Size and Confidence question for Small Sample Size on Large Lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
H Medical Devices and Mixed Lots Manufacturing and Related Processes 4
S Mixing lots at the platers - Electrical Contacts Manufacturing and Related Processes 11
Q AQL - Can progressive acceptance be used with longer/bigger lots? AQL - Acceptable Quality Level 5
R Sampling plan for lots smaller than 25 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
D Confidence interval for % overuse in component lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
C Qualification Lots and product transfer elements affected IATF 16949 - Automotive Quality Systems Standard 1
M Individual or Moving Range Chart? Parts run in lots of 7 with 4 key wall thicknesses Statistical Analysis Tools, Techniques and SPC 5
R Reject Rates - Lots and split lots Quality Tools, Improvement and Analysis 3
M Basics of a Quality System - Novice Book with lots of illustrations Book, Video, Blog and Web Site Reviews and Recommendations 5
S Lots of products - need CP's IATF 16949 - Automotive Quality Systems Standard 9
I TS 16949 Quality Manual Templates - Lots of free examples and great discussion! Quality Management System (QMS) Manuals 159

Similar threads

Top Bottom