SBS - The Best Value in QMS software

For Parts Manufacturer Approval (PMA) Is 100% Inspection Required?

Elsmar Forum Sponsor

Perspicuity

Starting to get Involved
#2
AC 21-43A states:
2.7.3 Statistical Processes
2.7.3.1 PAHs should document the use of statistical processes in the quality manual. Statistical processes will ensure that criteria for acceptance or rejection prevent the acceptance of nonconforming products or articles.
2.7.3.2 Statistical sampling should include sampling plans appropriate for the type of product or article being accepted. Personnel should be trained in statistical sampling techniques.
2.7.3.3 Engineering and manufacturing organizations should participate in the review, implementation, and maintenance of statistical quality/process control techniques used for product or article acceptance. PAHs may use SAE ARP9013, Statistical Product Acceptance Requirements.....
 
Thread starter Similar threads Forum Replies Date
A TSO (Technical Standard Order) and PMA (Parts Manufacturer Approval) - Differences Federal Aviation Administration (FAA) Standards and Requirements 5
J PMA (Parts Manufacturer Approval) FAA Submittal Federal Aviation Administration (FAA) Standards and Requirements 7
O Identifying KPI for AS9100 8.1.4 - Prevention of Counterfeit Parts - PCB assembly contract manufacturer AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 16
M Component Manufacturer of Food Stuffs Mfg. Equipment Parts - Eat Drink Policy ISO 13485:2016 - Medical Device Quality Management Systems 1
Moncia Tall Manufacturer - VDA Audit - Which parts of the audit apply to us? IATF 16949 - Automotive Quality Systems Standard 4
O REACH Registration - Automotive Parts Manufacturer based in Morocco RoHS, REACH, ELV, IMDS and Restricted Substances 4
Rameshwar25 Who has Design Responsibility in this Scenario - Rubber Parts Manufacturer IATF 16949 - Automotive Quality Systems Standard 23
V Is SPC & MSA mandatory for ISO 9001:2008 - Automotive Parts Manufacturer ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
A PMA (Parts Manufacturer Approvals) parts in Europe Federal Aviation Administration (FAA) Standards and Requirements 1
P TS Certification for Manufacturer of Aftermarket Automotive Parts? IATF 16949 - Automotive Quality Systems Standard 4
S Inspection Parts as saleable goods - IS0 13485 OEM medical device manufacturer ISO 13485:2016 - Medical Device Quality Management Systems 4
S Green Channel Parts - No Receiving Inspection - Cable Harness Contract Manufacturer Inspection, Prints (Drawings), Testing, Sampling and Related Topics 18
N Service Parts and PPAP - Outsourcing service parts to a third-party manufacturer APQP and PPAP 2
aleexander Grounding of metallic accessible parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
K 10 parts, 4 operators, 3 replications and each part has 3 location to measure. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
K Unused Service Parts in Newly Manufactured Medical Device? Other US Medical Device Regulations 1
M MSA angle issue - Nylon parts using Aberlink 3D Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
I What revalidation is necessary if we change parts in a WFI loop ? Qualification and Validation (including 21 CFR Part 11) 1
Fjalar Spare parts for discontinued MDD compliant class I medical device EU Medical Device Regulations 4
S Defibrillator Protection applicability When using Multiple applied parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
F Recording Nonconforming Purchased Parts Nonconformance and Corrective Action 5
D Suggestions for Ishikawa for hyperdetailed customer - plastic molding automotive parts Nonconformance and Corrective Action 9
R Is a FAIR required on parts that we design? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
C Packaging Long Parts Manufacturing and Related Processes 3
D Separation of F-type applied part and remaining parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
John C. Abnet VDA 6.3 - Question 7.3 - "blocking of parts" VDA Standards - Germany's Automotive Standards 6
I When is necessary to have RoHS declaration on non-electrical parts? REACH and RoHS Conversations 1
Z Rapid audit template for plastic parts manufacturing process Manufacturing and Related Processes 12
C Scrapping on production floor - Setup parts 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
G Bad Parts cause Customer line stop IATF 16949 - Automotive Quality Systems Standard 13
G Calibration of "Master Parts" Used as Gauges Calibration Frequency (Interval) 5
P FDA Approved Product Contact Parts ISO 13485:2016 - Medical Device Quality Management Systems 6
M Identifying Applied Parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Nonconforming parts accepted by operator with intention Human Factors and Ergonomics in Engineering 33
J Mechanical inspection techniques of close tolerance parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Sister-company providing parts is only ISO 9001 registered IATF 16949 - Automotive Quality Systems Standard 7
A AS9100D 8.1.4 Prevention of Counterfeit Parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
C Difficulties getting RoHS/REACH for cheap parts RoHS, REACH, ELV, IMDS and Restricted Substances 1
G Same parts but new customer - What will the auditor ask me? IATF 16949 - Automotive Quality Systems Standard 2
G Need to change KPI we called NC parts (maximum 3%.) to FTQ (first time quality) IATF 16949 - Automotive Quality Systems Standard 4
Q Do you classify applied parts? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
R Defib-proof applied parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
S Earthing of moving parts, designing tips IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
C Quantifying risk in choosing the number of parts, operators and replicates in a GR&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
Ed Panek Corona Virus impact on Supplier Audits and Received Parts ISO 13485:2016 - Medical Device Quality Management Systems 4
E IEC 60601-1 - Unearthed Medical Device Metal Parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
bryan willemot Shipping Aerospace parts without Stress certs Manufacturing and Related Processes 20
H Capability Data for Paint Thickness on Painted Parts Statistical Analysis Tools, Techniques and SPC 10
J SPC - Stamping parts - Small batch size Statistical Analysis Tools, Techniques and SPC 6
D 3 Companies - Medical device parts and substances - Responsibilities EU Medical Device Regulations 4

Similar threads

Top Bottom