Ford, Daimler Chrysler and GM Now Require ISO 14001 Registration

C

Cheryl

#51
I have a letter from DaimlerChrysler dated Oct. 5/00 it reads:

Effective January 1, 2003, DaimlerChrysler will require its suppliers to be third party registered to an environmental management system based on ISO 14001.
 
Elsmar Forum Sponsor
#52
Registration Requirement

I have heard that the Big 3 have or will sometime in the future require registration to the requirements of ISO-14000.
Does anyone have info on this. I haven't seen anything in writing.
The standard presently allows " a self-determination and self-declaration of conformance with the internationaal standard".
 

Randy

Super Moderator
#53
GM is apparently buying off on self declaration. The others (Ford, Chrysler) want 3rd party registration. Old news. Check their web sites or look in the archives here.
 
K

Kenen

#54
Big three requirements for ISO 14001

Hi everyone good day to ya'll. I have two questions to ask.

1. My company is ISO 14001 certified in addition to QS 9000. We are a Tier one supplier to the big three and then some. My question is: Is there a memo, document or anything from the big three (3) that states registration / certification to ISO 14001 is a must. I looked up the AIAG site but found nothing. Is there a web site I can go to?? Reaon for this question is the higher ups (it's always them) want to scrap the program.

2. Can I get samples of good flowcharts to guide me in establishing PPAP requirements. One from a Supplier's point of view and one from a customer's point of view. Naturally I do not have a budget nor have I had any training except I have read the PPAP manual.

Any and all help is appreciated. Thanks in advance.
 

Randy

Super Moderator
#55
If you're a Tier 1 supplier to the Big 3 you ought to already have all the documentation you need. This issue was addressed by the back in '99 when they told all their Tier 1's to do this. There is a pretty good trail of the discussions we had here in the Forum archives I think. Just search back to 1999 and follow what we said then.

I can tell you this though. If your top guys want to quit 14K to save money or make it easy tell them to forget getting money from those other guys. Ford has stated in no uncertain terms. No 14K-No moola. The others are about the same. Oh yeah to varying degrees so are the Japanese, Koreans, Germans and most of the rest of the civilized industrial world of automakers. Either get in the boat or learn to tread water. There are probably other companies waiting in the wings to fill your spot.

What never ceases to amaze me is how when people get to the TOP they automatically become smarter or sharper businessmen through osmosis, or the water, or through the crak they share in the boys room.

Tell them peeing and moaning about 14K with the Big 3 is a dead horse that doesn't need to be beaten anymore.:bigwave:

JMMHO:)
 
#56
Big three requirements for ISO 14001

Here is what we are telling folks about the Big Three Requirements:

Ford
•At least one manufacturing site from each production and non-production supplier must be third-party registered by December 31, 2001, and all manufacturing sites shipping products by July 1, 2003
General Motors
•All suppliers must implement an EMS by December 31, 2002 that is third-party certified or self-certified through a written declaration by a responsible executive. Third- party confirmation is strongly preferred.
DaimlerChrysler
•All suppliers must be third-party registered to an EMS based on ISO 14001 by January 1, 2003. The requirements of the EMS do not need to be established independently of the Quality Management System.

Hope it helps. Also, we have used ISO 14K to "find" real dollars in customer operations! In many cases, it more than paid for the effort.
 
C

Cheryl

#58
Latest letter from Ford dated Oct. 15/01 reads:

"As an interim checkpoint, all suppliers were requested to third-party at least one of their sites by December 21, 2001."

Q1-2002 establishes IS014001 as a requriement. Effective February 1, 2002, ISO 14001 certification is required to obtain Q1 first time approval or re-instatement following a revocation, and effective July 1, 2003, IS014001 certification is requried to maintain Q1 status.
 

Randy

Super Moderator
#59
OK..I'm providing a copy of the GM news release requiring 14K, now where can I get copies of all the others quoted in this thread.:confused:

I really, really, really need them.:(
 
Last edited:

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#60
Re: Ford and GM Require 14000 Registration!

What's the latest, folks?
 
Thread starter Similar threads Forum Replies Date
Marc NHTSA - Ford Focus and Dodge Durango (Daimler-Chrysler) to be recalled World News 1
S Do Ford, GMC, and/or Daimler have ISO/TS 16949 certification? IATF 16949 - Automotive Quality Systems Standard 29
Techilady Ford Special Characteristics Communication and Agreement Form (SCCAF) provides production requirements? FMEA and Control Plans 4
B Struggling with using the 5.6 version Ford Capacity Analysis Report APQP and PPAP 5
O Informational Ford Motor Company Customer Specific Requirements for IATF 16949:2016 - 08 Jan 2021 Customer and Company Specific Requirements 0
O IATF 16949 News Ford Motors Customer Specific Requirements Update - Nov 2020 IATF 16949 - Automotive Quality Systems Standard 5
C Ford's MMOG/le Template wanted Manufacturing and Related Processes 0
H FORD's project milestone acronyms Customer and Company Specific Requirements 4
R Ford Q1 Manufacturing Site assessment result Customer and Company Specific Requirements 3
Ron Rompen Ford Method - Position Capability with MMC Modifier Capability, Accuracy and Stability - Processes, Machines, etc. 14
M Ford Q1 Revocation Recovery Process Customer and Company Specific Requirements 5
A Is normal for FORD EU ask for the PSW every year APQP and PPAP 5
C A couple CSR (Customer Specific Requirements) questions... Esp. Ford & Toyota Customer and Company Specific Requirements 5
V What document to use to document Welding PV testing - Supplier to Ford APQP and PPAP 1
E Ford Phased PPAP and T2 timing APQP and PPAP 1
S Where to get Ford document FAP 03-111 FMEA and Control Plans 10
Q Ford's Q1 Score Prediction Customer and Company Specific Requirements 2
V Ford Dimensional Tag Characteristics requirements APQP and PPAP 2
R Ford Motor Company new CSR document - May 2014 Customer and Company Specific Requirements 1
K Q1-Ford - Does anyone have any Q1 templates? Document Control Systems, Procedures, Forms and Templates 2
Ron Rompen Ford Paint Audit Checklist Customer and Company Specific Requirements 4
S ASTM-D4000 & FORD "ZW" Call-Outs Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
S Dimensional Issues because of the last years FORD Recall Manufacturing and Related Processes 2
J JMP Gauge R&R with FORD MSA Data Quality Tools, Improvement and Analysis 2
A Statistical Software Calibration using Ford's "Sample Calibration File" Statistical Analysis Tools, Techniques and SPC 8
V Where I can find an AAR form on Ford Covisint? APQP and PPAP 1
Marc Ford is introducing an Aluminum F-150 Pick 'em Up Truck World News 1
V Webasto Ford Exceptions Form APQP and PPAP 1
Marc Ford - Self-parking technology called Fully Assisted Parking Aid World News 1
M Advise on R Chart with Ppk of 17.85 for Ford Capability, Accuracy and Stability - Processes, Machines, etc. 37
V What Ford Phase PPAP Level should DV testing be submitted? APQP and PPAP 1
Stijloor Ford - June 2013 Customer Specific Requirements (CSR) Customer and Company Specific Requirements 1
T What innovations led to Ford's production line? Coffee Break and Water Cooler Discussions 5
Ajit Basrur On Henry Ford's 150th Birthday, His Greatest Insight Has Been Tragically Forgotten Coffee Break and Water Cooler Discussions 11
D How long must we provide service parts to Ford? IATF 16949 - Automotive Quality Systems Standard 7
S Ford Motor Engineering Change Level definition Customer and Company Specific Requirements 6
C Will Ford accept AS9100 certification in place of ISO9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
R Ford SQDCME manual Manufacturing and Related Processes 1
D What is the Ford Troubled Supplier group? Manufacturing and Related Processes 7
V Ford SREA (Supplier Request for Engineering Approval) 2007 revision Document Control Systems, Procedures, Forms and Templates 2
C New Ford CQI 15 Rollout Requirement and reference to ESBC24-5005-AB IATF 16949 - Automotive Quality Systems Standard 3
D What is a Ford Single Scale? Customer and Company Specific Requirements 2
J Ford changing their acronym for Significant Characteristics from HIC to CTQ Customer and Company Specific Requirements 2
K How to fill out an SREA (Supplier Request for Engineering Approval) form at Ford? APQP and PPAP 3
G Ford - Type 1 Gage Study MSA (Measurement Systems Analysis) acceptable? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
xfngrs What does the Ford Europe acronym ISRD stand for? APQP and PPAP 6
V Where to find FORD Specific PPAP Training Training - Internal, External, Online and Distance Learning 3
M For Bulk Material (eg. paint), are there any guidelines for Ford PPAP Requirements? APQP and PPAP 1
J Ford Acronym - What the acronym "ym" means in Ford lingo? Customer and Company Specific Requirements 1
B FORD CPA (Capacity Planning Analysis) User Guide for Suppliers Customer and Company Specific Requirements 13

Similar threads

Top Bottom