FPDS now GPDS - How does GPDS align with the 23 elements of APQP

Elsmar Forum Sponsor

John B.

Registered Visitor
#3
Thank you Howard.

Since Ford has combined the FPDS, VPDS & MPDS into the GPDS their logic has changed. Now the timing template is split into two categories, Powertrain and Vehicle. Not too mention that alot of the milestones have different names. The new timelines still have the basic five phases of APQP, but everything matches up exactly.

When will documentation be availible?

BTW. I have called our STA and she is still trying to get up too speed on GPDS as well.

Thanks,
John
 
S

spitubbe

#5
Does anyone know how GPDS aligns with the 23 elements of APQP? I cannot find any info on FSN.

Thanks for your time,
John
If you go to the following link, there is an online training class to give you more information about GPDS. You must have access to covisint to get to this site.

https://web.fsli.ford.com/secure/index.cgi

If you can't use the link: go to Covisint.com - log in using the automotive log in option - choose the Ford portal - under applications click on Ford Supplier Learning Institute (FSLI) - Click "Enter the Institute" - click on the "Courses" tab near the top of the page - click on option 2 "Web-based solutions" - from this page, choose the GPDS training.
 

John B.

Registered Visitor
#6
Thank you for the reply.

I have already taken the on line class. It is a good overview but IMHO it does not deep dive into the aligning with the 23 elements of APQP.

Thanks,
John
 
S

spitubbe

#7
You are correct about that. Have you ever found a resource, other than in a classroom enviroment, that has that information? I really need to know more about it.
 
T

Tomasz S.

#8
Hello everybody,

Is there someone who can share info about How fit Ford Gates into project timeline? I mean which gate respond to which phase of the project and what is the time period between each Ford gate? Is it determined by Ford? Maybe approximately? E.g. when we have one component for Ford and Ford and we established start (SI) and end (J1) of the project how we should fit every Ford Gate into this project timeline? Sorry if it is stupid but I am trying to do this without contacting STA or someone on Ford side. I know that gates are: <KO>; <SI>; <SC>; <PH>; <PA>; <ST>; <PR>; <CP>; <CC>; <HTFB>; <LR>; <1PP>; <FEU>; S>; <CB>; <J1>; <FS>. Correct me if I am wrong. I am learning.
 
S

SUNJUAN

#9
There is a Schedule A form with all elements and necessary requriements and information. The template and manual has been attached.
 

Attachments

Thread starter Similar threads Forum Replies Date
J Ford GPDS, APQP, Product & Process Development Plans, Purchasing Department Processes Customer and Company Specific Requirements 1
S Ford Project Delivery Processes - GPDS, eFDVS Misc. Quality Assurance and Business Systems Related Topics 4
B Does FDA Registration QSR need to cover non-medical devices for contract repackager? US Food and Drug Administration (FDA) 0
lanley liao Does all of the suppliers need to integrated into the supplier list qualified of the company? Oil and Gas Industry Standards and Regulations 2
0 To which part of 13485 does this refer? ISO 13485:2016 - Medical Device Quality Management Systems 3
A Medical Device Contract Manufacturer - Does the CM need to register with FDA? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
J Records Control - Does each individual record need to be numbered? Records and Data - Quality, Legal and Other Evidence 2
lanley liao Does the customer`s trademark belong to customer-supplied property? Oil and Gas Industry Standards and Regulations 2
H How does a gas turbine work on diesel fuel? Oil and Gas Industry Standards and Regulations 12
G What does performance specification include? US Food and Drug Administration (FDA) 1
W Where does a coatings and paint company fall in IATF? IATF 16949 - Automotive Quality Systems Standard 5
A How much does a complete biocompatibility test package cost? Other ISO and International Standards and European Regulations 1
B Does anybody know how to get older versions of Minitab to work in Windows 10? Quality Tools, Improvement and Analysis 9
M Does the ISO 9001:2015 standard require a disaster recovery plan or emergency response plan ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
C Does an accessory need an IFU if it use is discussed in the Parent device IFU? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
S How long does it take to register a product with MHRA? UK Medical Device Regulations 3
M Quality Manual - Where does Revision History Section go? Document Control Systems, Procedures, Forms and Templates 8
U Does *anyone* know a lab that will test to EN 455-4 Medical Gloves shelf life determination? EU Medical Device Regulations 1
A Brexit When does the UK responsible person need to be in place? UK Medical Device Regulations 10
M How does IEC-60601-1 apply to a non-medical device in the patient vicinity? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
N Does anyone have experience of GB/T 34986-2017? China Medical Device Regulations 1
Z Does anyone have experience with EN ISO 17664 ? IEC 62366 - Medical Device Usability Engineering 9
F Does anyone have an ESD quality/cooler talk to share? Training - Internal, External, Online and Distance Learning 4
A What does this line from MDCG 2020-3 (MDR art. 120 substantial change) mean to you? EU Medical Device Regulations 4
D Change Approval Requirements - Does every change need formal customer approval? Design and Development of Products and Processes 17
T What does AS9100 mean when it says you must establish a process to do X? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 24
L Does a backdate form format can be changed if wrong revision is used? Document Control Systems, Procedures, Forms and Templates 8
B General Motors and Honda Alliance - What does this mean to suppliers? IATF 16949 - Automotive Quality Systems Standard 3
C ISO 13485 :2016 - CAPA - Does every CAPA need to be checked by regulations? ISO 13485:2016 - Medical Device Quality Management Systems 9
A Does ISO 9001:2015 cover all the requirements of ISO 10012:2003? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
N FDA UDI - Label vs. Labeling - Does the insert need to include UDI? Other US Medical Device Regulations 1
A Does anyone have a checklist of API Spec 650 13th Edition? Oil and Gas Industry Standards and Regulations 0
D Does Manufacture can submit CE mark application under MDD with NB for his New product after May 2020? EU Medical Device Regulations 3
A What does this sentence "this symbol shall be used in the orientation shown" mean in ISO 780:2015? Other Medical Device Related Standards 4
L Turkish Requirements - Does the Software need to be translated? CE Marking (Conformité Européene) / CB Scheme 2
R Where does IATF 16949 address Process mapping? IATF 16949 - Automotive Quality Systems Standard 3
J Does Pakistan Medical Device Import License allows parallel import? Other Medical Device Regulations World-Wide 0
BeaBea Interesting Discussion Where Does Marketing/ Advertisement of Products fit in to ISO 9001? Process Maps, Process Mapping and Turtle Diagrams 39
P Does anyone have a API Q1 Documentation Package? Quality Management System (QMS) Manuals 1
N What is our product classification? (Does Unclassified classification still exists) Other US Medical Device Regulations 14
C Does a CE mark infer meeting all applicable standards? CE Marking (Conformité Européene) / CB Scheme 4
N Small Company - Internal audit process - Who does the audit? Internal Auditing 16
J Does anyone have an excel IATF 16949 Internal Audit checklist I could use? IATF 16949 - Automotive Quality Systems Standard 7
A Does AS9100 require traceability to operators performing the work? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
I Does anybody use Detection in medical device Design FMEA? ISO 14971 - Medical Device Risk Management 18
A EN ISO 14971:2019 does not include the Annex Zs ISO 14971 - Medical Device Risk Management 4
Watchcat Does "Similar Device" = "Predicate"? EU Medical Device Regulations 7
C Document Control Stamps - Does anyone still stamp their documents? Document Control Systems, Procedures, Forms and Templates 24
Y Does Solidworks (2D/3D drafting modules) need validation? Other Medical Device and Orthopedic Related Topics 5
M Definition Open Audit - What does an Open Audit mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3

Similar threads

Top Bottom