FRACAS - Failure Reporting And Corrective Action System

M

Massimo Tosi

#1
Torino 19.05.99

Building an improvement process on designing our welding assembly lines, I think that the better way to achieve our target would be to use a FRACAS system. Do you agree with my choice? If so. Where can I find some modules for collecting data on corrective actions? Thank you. Best regards: M. TOSI
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
FRACAS - Failure Reporting And Corrective Action System, correct? In automotive it's 8-D or Nonconformance and Corrective Action System. It's been a while since I've seen the FRACAS initials. Think it was military manufacturing some years ago.

There are quite a few software solutions or you can write your own database in Filemaker Pro or similar database.
 
Thread starter Similar threads Forum Replies Date
S The difference between NCR vs. FRACAS (Failure reporting, analysis, and corrective action system) Nonconformance and Corrective Action 4
A FRACAS (Failure Reporting, Analysis and Corrective Action System) software Quality Assurance and Compliance Software Tools and Solutions 15
D FRACAS (Failure Reporting, Analysis and Corrective Action System) Form - MIL-HBK-2155 Document Control Systems, Procedures, Forms and Templates 2
A What is FRACAS? Failure Reporting Analysis and Corrective Action System AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 16
M Failure Reporting Analysis and Corrective Action Systems (FRACAS) Programs Nonconformance and Corrective Action 5
alonFAI Definition Failure Review Board and FRACAS - Relationship and differences Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
G FRACAS Tools Problem Solving, Root Cause Fault and Failure Analysis 1
S Does anyone use a FRACAS system to track lab equipment issues? Calibration and Metrology Software and Hardware 1
Q Definition FRACAS - What is the meaning of FRACAS Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
A Defect Data Collection or FRACAS Presentation - Looking for presentations Quality Tools, Improvement and Analysis 6
silentmonkey How to measure severity if my product is designed for emergency use and failure would result in death? ISO 14971 - Medical Device Risk Management 9
C Corrective action for failure in documents control ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
T Root Cause Failure Analysis - Not following Customer packaging Specification Problem Solving, Root Cause Fault and Failure Analysis 9
A Exact terms for a plating failure and difference between rejection rate and failure rate Manufacturing and Related Processes 9
JoCam Failure to test Class I medical device to IEC 60601-1-11 IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
C Kaizen Events - Factors Affecting Failure Lean in Manufacturing and Service Industries 13
C Failure nets - Same level effects FMEA and Control Plans 0
C Failure mode at 0h, vs. 1 year vs. 5 year... FMEA and Control Plans 8
R How to properly use Survival Analysis to predict time to machine failure Reliability Analysis - Predictions, Testing and Standards 0
D Testing to failure for design verification Reliability Analysis - Predictions, Testing and Standards 11
M Informational US FDA – Ethicon Recalls Circular Staplers for Insufficient Firing and Failure to Completely Form Staples Medical Device and FDA Regulations and Standards News 0
C Detection Action for Failure Effects - AIAG 4th Edition Layout FMEA and Control Plans 5
Marc NASA Says Oregon Company Metals Fraud Caused $700 Million Satellite Failure - 2019 World News 16
C PCBA Hardware Component different failure types - How to rate detection? FMEA and Control Plans 8
N PFMEA repetitive failure modes in subsecuent stations. FMEA and Control Plans 1
P Detection rating for a user (surgeon) related failure mode in DFMEA APQP and PPAP 3
J How to look up Failure Modes on FDA website FMEA and Control Plans 4
P Electronic component failure analysis turnaround time Reliability Analysis - Predictions, Testing and Standards 0
C Design for Assembly in DFMEA - Failure Effect of Sub-System(s) FMEA and Control Plans 5
Marc Server RAM Failure - 7 Dec 2018 Forum News and General Information 3
K Spot weld - Peel test failure Manufacturing and Related Processes 3
C Electrical Power Plant Supply failure in PFMEAs FMEA and Control Plans 10
kisxena Memo to File - Failure to Validate Supply Chain Security Management Systems 1
Y IEC 62304 Section 4.3(a) - 100% probability of failure IEC 62304 - Medical Device Software Life Cycle Processes 3
S FMEA column column ''therblig motion'' for a given potential failure FMEA and Control Plans 12
J What does "factional and failure dependencies“ mean? FMEA and Control Plans 1
N PFMEA Potential Failure Mode for Weight FMEA and Control Plans 5
P Root Cause for a Process Validation Batch Failure 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
M Infusion Pump Power Failure Alarm IEC 60601-2-24 IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
K Determining Effect of Failure without a DFMEA (Design FMEA) FMEA and Control Plans 1
R Will multi-time flashovers constitute a failure of Hi-Pot test? IEC 60601 - Medical Electrical Equipment Safety Standards Series 9
P IATF 16949 - 10.2.5 Warranty and 10.2.6 Field failure IATF 16949 - Automotive Quality Systems Standard 1
J Medical Device Failure Effects - Where to draw the line? FMEA and Control Plans 8
kedarg6500 Potential Effects of Failure(s) FMEA and Control Plans 23
Marc Definition PFH - Probability of dangerous failure per hour Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
Marc Definition PFD - Probability of failure on demand Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
C Squeeze in one more - Rate of failure Statistical Analysis Tools, Techniques and SPC 6
L First Time Completing a 5 Why/RootCause Failure Analysis Nonconformance and Corrective Action 8
Z Failure Mode Identification in PFMEA according to AIAG FMEA Rev.4 FMEA and Control Plans 6
B IPCD Sterility test failure during MPQ (EO sterilization validation) ISO 13485:2016 - Medical Device Quality Management Systems 2

Similar threads

Top Bottom