Fundamentals of Industrial Management - CCS Manual Online

D

Don Winton

#1
I received this recently and thought I would share it with the group.

-------Snip-------

DENizens,

I was starting to get pressure from folks wanting the CCS Manual available on the DEN web site. I have been working on an "elegant" solution... OK - in a case of "form follows function" a bare bones page is now up at:

***DEAD LINK REMOVED***

This is _The Fundamentals of Industrial Management - CCS Management Course_ written and taught by Homer Sarasohn and Charles Protzman in Japan immediately following the Second World War in the late 1940's. This is, in my opinion, a critical part of the history of management and quality.

The good folks at CSIRO in the 'land downunder' - specifically Nick Fisher and Suzanne Lavery put alot of work into converting a 50 year old document to a series of 15 <.pdf> files for easy downloading. Homer Sarasohn has reviewed the work and provides a few notes. When you go to the page above, pull down File #1 first, which is the front pages of the book -- these explain the work and provide Homer's current thoughts.

You may have noted the word "giants" in the web address. This will be the first addition to a new section of the DEN web site to be called "On the Shoulders of Giants" There is alot of research going on of the people that preceded Dr. Deming and whose shoulders he frequently acknowledged. This section will begin to house the fruits of that research.

Thanks to Homer and the folks at CSIRO - we now have access to this key document - thanks to them!!!

Jim Clauson [email protected]
Breakthrough Systems http://www.jclauson.com

-------End Snip-------

Regards,
Don
 
Last edited by a moderator:
Elsmar Forum Sponsor
D

Don Winton

#3
No poblem. I try to keep my eye out for jewels like this. For the most part, the DEN listserve is pretty tame, but on occasion, a jewel slips in.

Regards,
Don

BTW, Welcome back!

[This message has been edited by Don Winton (edited 01-23-99).]
 

Marc

Hunkered Down for the Duration
Staff member
Admin
#4
Don:

I assume you read the CCS manual? I never saw it before. Just read thru some of it. I'm impressed!
 
D

Don Winton

#5
Marc,

Like yourself, I have given it an overview for now. I marked areas for detailed reading at a later time (if I ever get any time). But, it is an impressive work.

Regards,
Don
 
C

Chicoria

#6
I have been looking for this, but it doesn't seem to be there any more - the site is for sale. Any other way to get it. I have looked all over and no links and no copies for sale that I can find. Any help on this?
 

Marc

Hunkered Down for the Duration
Staff member
Admin
#7
Since this thread is from 1999 the information is probably long gone and I doubt anyone here has copies from back then - But you never know.

I don't know where you can get copies today. Maybe one of the others here can help. Don still stops by from time to time - It may be that he can help if he reads this.

As an "extra":

Stranger in a Strange Land: How Homer Sarasohn Brought Industrial Quality to Japan and Why It Took Japan So Long to Learn

QualityMgt_Japan_Origins_26Oct08.pdf

CCS Memos

Kenneth Hopper Archives

Claremont Library - Sarasohn
 
C

Chicoria

#10
Thank you very much, Don and Marc, for the providing me with this valuable data. A pity that Homer's work is not more readily available.
 
Thread starter Similar threads Forum Replies Date
F ISO 9001:2008 Fundamentals: Basic Questions - Controlled Documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
J Cp and Cpk Chart Fundamentals Statistical Analysis Tools, Techniques and SPC 16
BradM Calibration Fundamentals: The How-To Thread General Measurement Device and Calibration Topics 3
Q QMS (Quality Management System) Fundamentals Training Training - Internal, External, Online and Distance Learning 4
V Quality Fundamentals - Teaching Materials in Arabic? Training - Internal, External, Online and Distance Learning 4
G Fundamentals of Color and Appearance - Seminar with Nick Lena - Worth the cost? Training - Internal, External, Online and Distance Learning 0
B Basic Fundamentals of Quality - Total Quality Management Registered Visitor Articles Archive 9
ccochran Effective Problem Solving - Six Problem Solving Fundamentals The Reading Room 22
M Fundamentals ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
C Industrial scales and MSA (IATF 16949 requirement 7.1.5.1.1) IATF 16949 - Automotive Quality Systems Standard 30
P Design FMEA for Industrial Machinery FMEA and Control Plans 3
P Average access height into an industrial machine (average base plate height) Human Factors and Ergonomics in Engineering 2
M Informational Feira Hospitalar – Programação da X Jornada de Ação em Política Industrial e Regulação para Produtos da Saúde (Portuguese only) Medical Device and FDA Regulations and Standards News 0
R Industrial accidents - Cleanup & disposal of blood spill Occupational Health & Safety Management Standards 1
M Informational EU – Questions And Answers Related To The United Kingdom’s Withdrawal From The European Union With Regard To Industrial Products Medical Device and FDA Regulations and Standards News 0
C What is an Airbus Industrial Process Control Assessment (IPCA) Audit Passing Score General Auditing Discussions 1
S Industrial Aseptic Bag Heat Sealing Sampling and Qualification Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
A Industrial OBL Practices EU Medical Device Regulations 5
P Industrial Painting Inspector training and certification in India Professional Certifications and Degrees 1
N Chemical Oxygen Demand (COD) Determination in Industrial Waste Water General Measurement Device and Calibration Topics 5
N Industrial MRI Diagnostic System - Which IEC standard should I use when testing? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Gert Sorensen Breast Implant Scandal in France - Industrial Silicone Used in Implants ISO 13485:2016 - Medical Device Quality Management Systems 46
E Production Planning in an Industrial Machine JOB SHOP Lean in Manufacturing and Service Industries 1
F Career Problem - Industrial design, QA, what next? Career and Occupation Discussions 5
J IFS (Industrial & Financial Systems) software and the FMEA module Quality Tools, Improvement and Analysis 2
Q Industrial Communication Display - People in the lines to know their performance Benchmarking 3
Q Career Change from Industrial Engineer to Quality Engineer Career and Occupation Discussions 30
O Industrial Marking Inks (Heat Resistant) Manufacturing and Related Processes 3
T Rotary Wing Industrial Base Suppliers Supplier Quality Assurance and other Supplier Issues 2
S What is Good International Industrial Practices (GIIP)? Miscellaneous Environmental Standards and EMS Related Discussions 2
Mohammed Gouda Latest standard for thermocouples & iprt (industrial platinum resistance thermometer) General Measurement Device and Calibration Topics 5
D Industrial Safety - Storage of Flammable Materials & Sprinkler/Electrical fires Occupational Health & Safety Management Standards 3
T Utilization of new ERP system - (IFS- Industrial and Financial Systems) Quality Assurance and Compliance Software Tools and Solutions 8
K EN746-2 Industrial thermoprocessing equipment - Safety requirements.... Other ISO and International Standards and European Regulations 1
H Effectiveness of ISO 9001:2000 Implementation in small industrial organizations? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 29
ScottK Are there any IIE (Institute of Industrial Engineers) members on board? ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 1
S ISO 9001 Certifications Analysis by Industrial Sectors ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Z Industrial Standard on Accelerated Ageing test for plastic carrier tape Reliability Analysis - Predictions, Testing and Standards 8
G Uncertainty budget for industrial temperature controllers Measurement Uncertainty (MU) 2
O Industrial Engineering department hierarchy Manufacturing and Related Processes 9
R Could Factory Process Auditor and Industrial Engineer Coexist? Lean in Manufacturing and Service Industries 2
A Functional test for industrial plastic closures Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Incoming Inspection Skip Lot - Industrial staples Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
I Top Manufacturing Systems Faculties among Industrial Engineering Departments in US Training - Internal, External, Online and Distance Learning 3
Ted Schmitt CE Marking for cast iron, cast steel, and bronze Industrial Valves CE Marking (Conformité Européene) / CB Scheme 10
T Industrial Robotics Programming Training Question Training - Internal, External, Online and Distance Learning 2
M Dock to Stock Template for Distributor/Warehouse of Industrial Metals Document Control Systems, Procedures, Forms and Templates 5
K Can we Exclude Design and Development clause in ?Industrial Design? Company? Design and Development of Products and Processes 12
S Student requests help on Lean Manufacturing - Masters in industrial engineering Lean in Manufacturing and Service Industries 14
Q Point me in the Direction of an Industrial Engineering (IE) society in IL or SE WI Lean in Manufacturing and Service Industries 5

Similar threads

Top Bottom