Gage R&R Form in Excel for Calculating Gauge R&R - Attached

Jim Wynne

Staff member
Admin
#41
What do you enter in the box for "gage discrimination" and "unit"? Also, entering a gage measurement eg. .03125, it automatically rounds up.
Gage discrimination is the smallest unit of measure the device is capable of. For example, for a 0-1" micrometer that can measure in thousandths, the discrimination value might be .0001, or perhaps .0005 for some digital micrometers.

The "unit" is unit of measure--inches, millimeters, etc.

As for the rounding, select the cell (or a range of cells), right-click and choose Format Cells. From there you can choose the number of decimal places to display. Note that the precision of the numbers in question isn't affected by the number of decimal places displayed; calculations will be done using the value entered. Thus if the cell is formatted to display three decimal places (.313 is displayed when .3125 is entered, e.g.), .3125 will be used in calculations.
 
Last edited:
Elsmar Forum Sponsor
M

Mr.Happy

#44
Hi,

I update form to MSA 4th edition. If someone found some nonconformity in calculations plese inform me.

Thanks
Hi Automoto,

Could you explane what the function of "Process Pp" is ?
When and how to use it, or not to use it !

Mr.Happy :confused:
 
A

allan.guo

#46
Hello Automoto,
Thanks for your kindly sharing.
But could you also tell us the password if your really want to sharing with us.
 
I

Ingo1966

#47
Hello

Look's good !
I like your very efficiant Excel style. ( I am still learning Excel :)

Attached I have an alternative approach with ANOVA and also some Graphics which MiniTAb gives as "Health Charts".
In my MSA Training Class I give it to my Participants for free of use.
The calculations were checked with MiniTab.

Regards Ingo
 

Attachments

Last edited by a moderator:
T

tsmooth12

#49
Re: Gage R&R Form in Excel for calculating gauge R&R attached

Hello everyone! i am new to the forum and i have a question. Does anyone have a gage RR study that is done with one appraiser?
 
I

Ingo1966

#50
Re: Gage R&R Form in Excel for calculating gauge R&R attached

Hello tsmooth12,

A Gage R&R with one Appraiser makes only sense if you have an automated Measurement process without Appraiser Influence.

The calculation Procedure is described in some Procedures as Study 3 or Study 4 depending on Situation.
But the calculation is different to the classical Study 2 Gage R&R approach.

It is not a big deal to create an Excel which is doing Study 3 or 4 but it depends on your Customers requested Procedure.

In moste cases it is a simple Range Calculation.

Hope it helps you a little bit
 
Thread starter Similar threads Forum Replies Date
T Gage R&R Excel .xls form and SPC Xbar and R template (lost it.. ) Excel .xls Spreadsheet Templates and Tools 13
I Gage R&R Form - Excel or other - Calculations Questions Excel .xls Spreadsheet Templates and Tools 13
A What should be the contents of the New Gage Introduction Form ? General Measurement Device and Calibration Topics 3
U Root Cause for a Form not having all info (traceability standard and the gage number) Problem Solving, Root Cause Fault and Failure Analysis 14
H Gage R&R Data Collection Form w/ Appraisers Names, Number of Parts, Number of Trials Document Control Systems, Procedures, Forms and Templates 2
M AS9100 Gage R&R Form Needed Document Control Systems, Procedures, Forms and Templates 6
M Gage R&R form for 2 operators 10 parts and 3 trials needed Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
S GD&T Rule 1: Gage size for form check at MMC (maximum material condition)? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
B Gage calibration form needed Document Control Systems, Procedures, Forms and Templates 8
P Gage Repeatability (1x1x10) form - 1 part measured 10 times by 1 appraiser Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
Q Gage R&R lite? This form only uses two operators measuring five parts one time Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
M Attribute Gage R&R Form - Long Version - AIAG's MSA Manual Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 35
T Plug Gage Calibration Calibration and Metrology Software and Hardware 1
L Gage R&R TMV Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S MSA for attribute relation gage Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
E Zero part to part variation - Gage R&R project Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
M Gage R&R and right way to measure Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
L Gage RandR on automated equipment. IATF 16949 - Automotive Quality Systems Standard 7
B Gage calibration frequency, ISO and IATF - What are the requirements Calibration Frequency (Interval) 3
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
R Determining Uncertainty from Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
C Correct Calibration Method for Dial Depth Gage General Measurement Device and Calibration Topics 6
C Gage Block Wringing General Measurement Device and Calibration Topics 3
B Gage R&R with NDC=1 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
S Type 1 Gage R&R or something else? Reliability Analysis - Predictions, Testing and Standards 6
G Should I perform Gage R&R only at the beginning of a new project? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
G Gage R&R - Where am I going wrong? Part of a FAIR submission (Aerospace) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R Gage R&R Excel templates Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K Gage R&R with more than 3 appraisers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Anerol C Gage R&R Template AIAG 4th Edition IATF 16949 - Automotive Quality Systems Standard 3
T Attributes SPC study - Attributive control (Go gage) Statistical Analysis Tools, Techniques and SPC 5
S Capability or Gage R&R Study for Leak Tester? Reliability Analysis - Predictions, Testing and Standards 15
N % Tolerance - Type 1 study on the gages, then a gage R&R (ANOVA) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Definitive answer on Type 1 vs Type 2 vs Type 3 Gage Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
V Gage Management and Gage R&R Software General Measurement Device and Calibration Topics 1
D Gage R&R Study on Load Cells - Large chemical blending tanks IATF 16949 - Automotive Quality Systems Standard 1
B Minitab Type 1 Gage Study on True Position Question Measurement Uncertainty (MU) 1
S Gage R&R on alloy Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
8 Need Help - Runout - Function Gage Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
L Gage R&R studies for identical Devices - Need to confirm the requirement to perform them Reliability Analysis - Predictions, Testing and Standards 2
G Stab Pin Size For Check Gage Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
E Functional Gage for TOP applied at RFS Design and Development of Products and Processes 5
F No reproducibility Error in Gage R&R? Reliability Analysis - Predictions, Testing and Standards 4
M Template for Attribute Gage R & R wanted Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
G Warning about Deltronic Gage Pins - The "Certification of Accuracy" document General Measurement Device and Calibration Topics 13
A Gage type 1 study on CMM Capability, Accuracy and Stability - Processes, Machines, etc. 2
Q Gage R&R for Instant Measurement Machine Manufacturing and Related Processes 6
M Gage R&R with large inter part variance - Torque Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
D Do we need normal data for gage r&r studies? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5

Similar threads

Top Bottom