Gage R&R - Need template

B

banthony

#1
Its been several yrs since i conducted a gage r & r, and need an excel template to get me started. Would anyone have one to share?
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2
Thread starter Similar threads Forum Replies Date
Ron Rompen Need help with MSA/Gage R&R - Seeking Minitab template file/sample GR&R study Using Minitab Software 7
8 Need Help - Runout - Function Gage Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
L Gage R&R studies for identical Devices - Need to confirm the requirement to perform them Reliability Analysis - Predictions, Testing and Standards 2
D Do we need normal data for gage r&r studies? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
D Do I need part variation while doing Destructive Variable Gage R&R MSA study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
A Does Torque Gage Need Validation? Reliability Analysis - Predictions, Testing and Standards 4
A Does an attribute study (Go/NoGo pin gage) need two studies (1 for each pin) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
B Do I need to perform Gage R&R on a Digital Temperature & Humidity Gage Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 18
K Qualifications I need to adhere to for Thread Gage Calibration Calibration Frequency (Interval) 1
Z My first Gage R&R - Paper/Poly/Foil Material Bond Test, need help Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
A Destructive Attribute (Crossed) Gage R&R - Need Help! Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
M Do we need a Gage R&R on Caliper used for Product Audits? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
G New gage calibrated at factory do I need the certificate? Calibration Frequency (Interval) 4
C Need source for temperature and humidity gage General Measurement Device and Calibration Topics 8
S Need to find good set of Gage Blocks General Measurement Device and Calibration Topics 3
K Validating a gage/fixture in-house under TS 16949 - Need information General Measurement Device and Calibration Topics 2
D Do I Need To Do Gage R&R (GR&R) On Each Device Or Just Each Family Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
B Sampling in GRR - Why do we need 10 samples to do a Gage R&R? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
E Successful Gage R&R Anova or X/R? Need example Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
E Digital Height Gauge Gage R&R - Need Advise and Help Quick Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
Q Gage Supplier - Need a 72" (min) Digital Read Out LLM for the Shop Floor General Measurement Device and Calibration Topics 2
Z Determining how many measurement devices need gage R&R? MSA Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 13
C I need to understand gage R&R - University Instruments Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
D Need help with Gage R&R method Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
K Need Assistance Interpreting Gage R&R Data - Stylus profilometer Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
S Need help purchasing a Digital Borematic gage (Mitutoyo was suggested) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 13
C Need 3 appraisers for GR&R (Gage R&R) of Automatic Test Measurements? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
C Need Help with Gage R&R Spreadsheet Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S Statistical Process Control and the need for Measurement System Analysis (Gage R&R) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
B Need to know how to calibrate inch and metric gage blocks correctly. General Measurement Device and Calibration Topics 2
D Gage Correlation - I need more information General Measurement Device and Calibration Topics 5
T Plug Gage Calibration Calibration and Metrology Software and Hardware 1
L Gage R&R TMV Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S MSA for attribute relation gage Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
E Zero part to part variation - Gage R&R project Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
M Gage R&R and right way to measure Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
L Gage RandR on automated equipment. IATF 16949 - Automotive Quality Systems Standard 7
B Gage calibration frequency, ISO and IATF - What are the requirements Calibration Frequency (Interval) 3
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
R Determining Uncertainty from Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
C Correct Calibration Method for Dial Depth Gage General Measurement Device and Calibration Topics 6
C Gage Block Wringing General Measurement Device and Calibration Topics 3
B Gage R&R with NDC=1 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
S Type 1 Gage R&R or something else? Reliability Analysis - Predictions, Testing and Standards 6
G Should I perform Gage R&R only at the beginning of a new project? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
G Gage R&R - Where am I going wrong? Part of a FAIR submission (Aerospace) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R Gage R&R Excel templates Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K Gage R&R with more than 3 appraisers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Anerol C Gage R&R Template AIAG 4th Edition IATF 16949 - Automotive Quality Systems Standard 3

Similar threads

Top Bottom