Generating samples from a population in Minitab

A

AntoineR

#1
Hello everybody, I am Antoine Renson, I'm new on this thread. I'm a student in Belgium in chemical engineering.

For a research, I have to accomplish a task on Minitab which I am not able to do after long hours of triying.

The task is to generate from a population (For example {1,2,4,5,7,9,11}) the maximum amount of samples of 3. On these samples, I would like to get the median.

So the samples are (1,1,1), (1,1,2), (1,1,4)....
(2,1,1), (2,1,2), (2,1,4)... you get the idea

How do we do to generate all these samples on Minitab ? And once we get the samples, how do we figure out the median value for all of them ?

Thank you very much for your help

Antoine
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
M IVD - Generating clinical data for IVD’s in the EU EU Medical Device Regulations 2
D Our company is considering generating a QMS Process to IATF 16949 IATF 16949 - Automotive Quality Systems Standard 1
A Generating Purchase Orders - Orders made over the Internet or a Phone ISO 13485:2016 - Medical Device Quality Management Systems 8
S Colors of Controls - RF Generating Device Handpiece Connector IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
D Generating a detailed Process Plan - Help needed Process Audits and Layered Process Audits 6
B Can we stop Customer Surveys as they are generating low return rates ? Customer Complaints 16
G Cost for Generating one Class IIb Medical Device GMDN Code Other Medical Device and Orthopedic Related Topics 2
J Obtaining / Generating a Global Medical Device Nomenclature Classification ISO 13485:2016 - Medical Device Quality Management Systems 4
C QA is 'non revenue generating'- Contract testing laboratory Service Industry Specific Topics 14
R Responsibilities for generating level 2 through 4 documents/forms Document Control Systems, Procedures, Forms and Templates 1
K Opinion on Radiological Aspects - Nuclear power generating EMS Miscellaneous Environmental Standards and EMS Related Discussions 5
A Device Serialization - Generating a unique identifying serial number ISO 13485:2016 - Medical Device Quality Management Systems 1
Raffy Preventive Action - Does generating an FMEA help future containment? Preventive Action and Continuous Improvement 2
V Lead Auditor Requirements and Generating A Procedure For The Lead Auditor Training General Auditing Discussions 4
T IVD Risk - destruction of patient samples - Harm to property? ISO 14971 - Medical Device Risk Management 5
G MDR Requirements for Samples EU Medical Device Regulations 5
V Sterility samples requirements for AAT Manufacturing and Related Processes 9
A MSA samples Preparation. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
L ASTM F88 Seal Strength of pouches - amount samples per pouch (discussion) Qualification and Validation (including 21 CFR Part 11) 8
A Samples preparation for GRR Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
M Selecting Samples for an R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
G Change Control for Test Samples Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
D Conductivity Water Samples testing temperature Qualification and Validation (including 21 CFR Part 11) 2
Watchcat REGULATORY WATCHCAT - De Novo Proposed Rule - Samples & Labeling Other US Medical Device Regulations 0
R Select the 1 Supplier based on the Parts Durability from 6 Supplier Samples using Minitab Using Minitab Software 11
P Retention Samples for medical devices ISO 13485:2016 - Medical Device Quality Management Systems 2
N Master Samples - What should we be keeping? IATF 16949 - Automotive Quality Systems Standard 9
P PPAP samples retention time IATF 16949 - Automotive Quality Systems Standard 5
B Retention Samples when Customer Leaves Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
R Accelerated Aging - Creating test samples - Implantable medical device Question Other Medical Device Related Standards 4
A AQL - How to count samples with defects for each defect class AQL - Acceptable Quality Level 17
Z Labeling for Medical Device Samples - Surgical instruments 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
S Retained samples from each batch of spinal implant medical screws that we make ISO 13485:2016 - Medical Device Quality Management Systems 7
S Samples for GR&R - Can we get the 10 samples from multiple models Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
WEAVER Retention of golden samples for GR&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
K How Many Samples to send for Chemistry Testing Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
A Interpretation of Article 16 (2b) - Packaging, samples and Certificate EU Medical Device Regulations 10
G How many samples you require to test during PQ for validation of a equipment? ISO 13485:2016 - Medical Device Quality Management Systems 1
S Help develop sampling plan for prototype samples (medical devices) Statistical Analysis Tools, Techniques and SPC 7
K UDI Labeling for Medical Device Samples 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
B Guidance Required for Examining 168 Hour Salt Spray Test Samples Manufacturing and Related Processes 5
bobdoering "nds" or Number of Discriminate Samples - the Necessary Tool to Work With "ndc"! Imported Legacy Blogs 0
E Requirements for sending Medical Device Samples to Indonesia Other Medical Device Regulations World-Wide 5
Z Labeling Requirements for Free Samples supporting Clinical Evaluation EU Medical Device Regulations 2
D Should Biocompatibility Tests be performed on Production Samples? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9
R Customer Complaint - Samples vs. Removal - FDA Requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
GURU SDI Cleanliness Requirements for Initial Samples Customer Complaints 4
WEAVER Gage R&R Sample Selection - Can we include NG Samples? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 12
knightarmourus Keeping the test samples in after market nlight alloy wheel production Manufacturing and Related Processes 2
knightarmourus Initial Samples with dimensional deviation in Serial Production Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2

Similar threads

Top Bottom