Glove Protein Content in μg/dm2 to μg/g and Powder Amount mg/dm2 to mg/glove

S

Sztpyol

#1
Hi Friends,

can anyone help to compare the protein content of the gloves in μg/dm2 to μg/g ?

And the powder amount
mg/dm2 to mg/glove?

Thank you very much for your help!!!

Best regards
 
Elsmar Forum Sponsor

Ronen E

Problem Solver
Staff member
Moderator
#3
Hi Friends,

can anyone help to compare the protein content of the gloves in μg/dm2 to μg/g ?

And the powder amount mg/dm2 to mg/glove?

Thank you very much for your help!!!

Best regards
Let GDF ("Glove Density Factor") be glove material weight (in g) per dm^2 (if you can't get this data from the manufacturer, you can roughly estimate it from the glove's weight and surface area, which should be the projected area x2).

(dm^2 = 100cm^2)

Protein content of the gloves in μg/dm2 / GDF = protein content of the gloves in μg/g.

Once you know the glove surface area in dm^2, just multiply the powder amount in mg/dm^2 by this value, to get the powder amount in mg/glove.
 
S

Sztpyol

#5
Dear Ronen,

Thank you again. I found this article on the internet:

"The powder free type gloves shall have a maximum 2.0 mg (milligrams) total per glove of residual donning powder as specified in ASTM D3578-05.
1. The powdered type gloves shall have a maximum 10 mg/dm2(milligrams of powder per square decimeter) of glove surface area OR 10 mg/g of glove (milligrams of powder per gram) of glove weight with a maximum of 120 mg total per glove of residual donning powder as specified in ASTM D3578-05e1.

[FONT=&quot]The latex gloves shall have a maximum 200 μg/dm[/FONT][FONT=&quot]2[/FONT][FONT=&quot](micrograms per square decimeter of surface area) OR 200 μg/gram (micrograms per gram of glove weight) with a maximum of 1200 (μg) micrograms per glove of Aqueous Soluble Protein Content as specified in ASTM D3578-05e1. [/FONT]"

It means that GDF ("Glove Density Factor") is 1. (?) And the glove surface area in dm^2 is 12. (?)
 
Thread starter Similar threads Forum Replies Date
supadrai Remote Opportunity - Large Scale Glove Factory QMS / RA / Legal Job Openings, Consulting and Employment Opportunities 0
K Section 13.6 Annex 1 MDD 93/42/EEC for Glove EU Medical Device Regulations 0
D Is there a specific location for PPE such as safety glass holders and glove dispensers should be mounted Occupational Health & Safety Management Standards 10
Q FDA To Publish Powdered Glove Ban Monday (December 19, 2016) Other US Medical Device Regulations 0
N Declaration of Conformity from the Notified Body for our Surgical Glove Class IIa CE Marking (Conformité Européene) / CB Scheme 6
N Protein content limit in condom according to ASTM standard Other ISO and International Standards and European Regulations 3
K Data Analysis of Milk Composition (Seven Parameters like Protein, Fat, Lactose, etc.) Using Minitab Software 18
shimonv Document Control Procedure Header Content Document Control Systems, Procedures, Forms and Templates 3
S Looking for Quality Content to Build Medical Device Curriculum - Concept to Commercialization Training - Internal, External, Online and Distance Learning 4
A Several sections of traditional 510(K) have the same or similar requirement of content. US Food and Drug Administration (FDA) 4
F Calibration certificate content - Average Value and True Value ISO 17025 related Discussions 6
Raffy ISO 14001 9.2.2 Internal Audit Programme Content Internal Auditing 10
F Control of medical device IFU content Other Medical Device and Orthopedic Related Topics 3
U Manufacturing solutions and keeping records on quality Content CE Marking (Conformité Européene) / CB Scheme 3
L Label Content Requirements under MDR regulation EU Medical Device Regulations 5
dgrainger MHRA - Creation of new UK Responsible Person section with added content. Medical Device and FDA Regulations and Standards News 0
L Content of Declaration of conformity (MDR) EU Medical Device Regulations 1
E Calibration Certificate Content Requirements General Measurement Device and Calibration Topics 3
G ISO 9001 - 9.3.1 Management Review - Content and Frequency Management Review Meetings and related Processes 12
Dean Bell QMS Content for one-man consultancy Consultants and Consulting 19
I Environmental Policy Content - ISO 14001 Clause 5.2 ISO 14001:2015 Specific Discussions 2
F Organising IQ, OQ and PQ content in a "smart" way Qualification and Validation (including 21 CFR Part 11) 3
M Informational USFDA final guidance – Recommended Content and Format of Non-Clinical Bench Performance Testing Information in Premarket Submissions Medical Device and FDA Regulations and Standards News 0
L Class IIa Medical Device, CE Mark & 510k - Labeling Content CE Marking (Conformité Européene) / CB Scheme 4
M Informational EU – MDCG 2018-8 – Guidance on Content of the certificates, voluntary certificate transfers Medical Device and FDA Regulations and Standards News 0
L EU-MDR-Annex I - 10.4 (CMR & Endocrine-disrupting properties) - Labeling Content EU Medical Device Regulations 5
M FDA News USFDA Final Guidance – Manufacturing Site Change Supplements: Content and Submission Medical Device and FDA Regulations and Standards News 1
G Regulatory requirements for secondary packages in terms of label content Other Medical Device Regulations World-Wide 2
M Is referenced content sufficient to meet record content requirements? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
S Corrections and Removals - Fiber Content in our textile products was incorrect Other US Medical Device Regulations 1
D Technical file structure/content requirements for Class IIa devices & new MDR EU Medical Device Regulations 14
H Numbering for documents with same content but different language ISO 13485:2016 - Medical Device Quality Management Systems 4
R ISO 9001:2015 Transition Quality Manual Update - Redundant Content ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
C Software for Medical Devices - Requirements Content for compliance with IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 1
V Periodic Audit Trail Review - Scope, Content & Frequency Qualification and Validation (including 21 CFR Part 11) 10
P Content of an IVD Technical Dossier to Register a Device to Japan Japan Medical Device Regulations 0
Q Changing Terminology in ISO 9001:2015 - Documentation Content ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
M Work Instruction Content or Sequence Changes and Operation Numbering Document Control Systems, Procedures, Forms and Templates 3
C AS9102 FAIR Form 1 Content Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
Ronen E FDA issues draft guidance on form & content of UDI Other US Medical Device Regulations 0
T ISO 62304 - Software requirements content IEC 62304 - Medical Device Software Life Cycle Processes 3
H Cause analysis for an Audit Finding - Purchasing Procedure Content ISO 13485:2016 - Medical Device Quality Management Systems 9
O Question on the Content of an Abbreviated 510(k) US Food and Drug Administration (FDA) 1
Q Scope in procedure and content for 7.6 Monitoring and Measuring Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
A API (American Petroleum Institute) Design Package Content Requirements Oil and Gas Industry Standards and Regulations 1
S Required PFMEA Content - Final QC Inspection FMEA and Control Plans 7
R Inconsistent Form Content including User Changes Document Control Systems, Procedures, Forms and Templates 3
B External Label Content of multi-device (sterile and nonsterile) EU Medical Device Regulations 2
J Document Control Features (Document Content Requirements) and 21 CFR 820.40 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
M Scope content of TS 16949 certificate under Rules 4 IATF 16949 - Automotive Quality Systems Standard 6

Similar threads

Top Bottom