GM PMP characteristics on a GM print next to the gage points

soulmas

Involved In Discussions
#1
Hi!

Anyone know what PMP characteristics are? I found it on a GM print, next to the gage points... some of the gage points were identified as "PMP". what's the meaning of that? are these considered as Special characteristics? what PMP stand for?

:)
soulmas
 
Elsmar Forum Sponsor

soulmas

Involved In Discussions
#2
I did a research and PMP stands for: Process Monitoring Points. I found a document that specifies PMP's and KPC's.. so, they are making a difference between both of them.. however, the chart for controlling both characteristics is the same.. so, again my question is.. does anybody from GM knows if the PMP's should be controlled by SPC - Cpk's, or could be just controlled on the control plan, like a non-special characteristic?
 

Stijloor

Staff member
Super Moderator
#3
I did a research and PMP stands for: Process Monitoring Points. I found a document that specifies PMP's and KPC's.. so, they are making a difference between both of them.. however, the chart for controlling both characteristics is the same.. so, again my question is.. does anybody from GM knows if the PMP's should be controlled by SPC - Cpk's, or could be just controlled on the control plan, like a non-special characteristic?
Are you a direct (1st Tier) supplier to GM?
If so, you could ask them directly.

I will investigate....

Stijloor.
 
Thread starter Similar threads Forum Replies Date
R PMP Gateway systems - Looking for a robust automotive gateway system Quality Assurance and Compliance Software Tools and Solutions 1
L PMP Project Management and APQP - Differences APQP and PPAP 9
S Parts, Materials and Processes (PMP) Control Plan - Mil-Std-3018 Misc. Quality Assurance and Business Systems Related Topics 1
Techilady Ford Special Characteristics Communication and Agreement Form (SCCAF) provides production requirements? FMEA and Control Plans 4
R Critical Characteristics & Special Characteristics FMEA and Control Plans 2
S What should i choose for "testing procedure" characteristics? (N95) General Information Resources 0
M Critical Characteristics APQP and PPAP 1
C AIAG-VDA PFMEA - 1st special Characteristics? [5step vs. 6step] FMEA and Control Plans 3
J 1.11 Preliminary Identification of Special Product and Process Characteristics APQP and PPAP 4
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
earl62 What is the best way to control special characteristics in Control plan? Is it Mandatory to have SPC for IATF 16949? IATF 16949 - Automotive Quality Systems Standard 12
B FCA US Customer Specific IATF 16949- Critical Characteristics 8.6.2 Customer and Company Specific Requirements 0
K PSA Special characteristics Customer and Company Specific Requirements 0
A Demonstration of Equivalence - Need for comparing biological characteristics for an SamD EU Medical Device Regulations 1
K EU MDR Annex 1 Chapter III: Information in the Instructions for Use-23.4 (e) the performance characteristics of the device; EU Medical Device Regulations 1
A AS9102B - 3.6 Design Characteristics and form 3 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
R What is meant by Use of COMPONENTS WITH HIGH-INTEGRITY CHARACTERISTICS in ME EQUIPMENT (clause no 4.9) IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
H SPC for special characteristics - CSR - Control of SC and CC Statistical Analysis Tools, Techniques and SPC 1
Prashant G AS9100 Requirement - Verification of characteristics results with drawing requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
F Assignment of Special Characteristics to government regulations IATF 16949 - Automotive Quality Systems Standard 5
C AS9100 8.3.5.e Design and Development Outputs - Key Characteristics / Critical Items AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
N PQC (Product Quality Characteristics) and PFMEA FMEA and Control Plans 3
P Sanctioned Interpretations - IATF 16949 Cl. 8.3.3.3 Special characteristics IATF 16949 - Automotive Quality Systems Standard 3
E IATF 16949 Cl. 8.2.3.1.2 - Customer-designated special characteristics IATF 16949 - Automotive Quality Systems Standard 1
J Are Capability Requirement(s) Valid for All Characteristics? Capability, Accuracy and Stability - Processes, Machines, etc. 6
D Customer-Designated Special Characteristics vs. Special Characteristics IATF 16949 - Automotive Quality Systems Standard 2
S IATF 16949 Clause 8.3.3.3 - Documentation of all Special Characteristics in Drawings IATF 16949 - Automotive Quality Systems Standard 2
S What should the FMEA Severity for SC & CC Characteristics be? FMEA and Control Plans 4
A Not all characteristics follow a Normal Distribution - How do you do SPC Chart Capability, Accuracy and Stability - Processes, Machines, etc. 5
Y Process Characteristics for Inspection and Storage FMEA and Control Plans 4
S FMEA's - Severity and Classification of Print Characteristics FMEA and Control Plans 1
C Special Characteristics - ISO/TS 16949 Clause 7.3.2.3 IATF 16949 - Automotive Quality Systems Standard 8
N VDA 1 Critical Characteristics Requirements Help needed VDA Standards - Germany's Automotive Standards 6
Q Choosing In-Process Inspection Characteristics Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
B Is SPC data For Special Characteristics always required? TS 16949 clause 8.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Douglas E. Purdy C=0 Sampling for Variable Characteristics Quality Manager and Management Related Issues 14
V Ford Dimensional Tag Characteristics requirements APQP and PPAP 2
R New draft guidelines for 510 (K) with Different Technological Characteristics. 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
U SC (Special Characteristics) in CP (Control Plan) not on all Prints IATF 16949 - Automotive Quality Systems Standard 1
Q TS 16949 Clause 7.2.1.1 Customer Designated Special Characteristics IATF 16949 - Automotive Quality Systems Standard 6
Ron Rompen Seeking Test Lab which can do 1440 Hour Accelerated Weathering Characteristics Misc. Quality Assurance and Business Systems Related Topics 1
Z Pass-Though Characteristics in PFMEA (Process FMEA) FMEA and Control Plans 2
G How to manage/control critical items and key characteristics? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
A MSA (Measurement System Analysis) for Characteristics with One Tolerance Limit Capability, Accuracy and Stability - Processes, Machines, etc. 10
J Special characteristics in TS 16949 7.3.2.1 - Why 7.3.2.3 not 7.2.1.1 IATF 16949 - Automotive Quality Systems Standard 4
G How to identify Key Characteristics (KC) in a Design FMEA (DFMEA) FMEA and Control Plans 2
Q Identifying Critical Items and Key Characteristics - Product Realization Process AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
A Special Characteristics revisited IATF 16949 - Automotive Quality Systems Standard 4
A Special Characteristics -> Any specific additional requirements to be met? IATF 16949 - Automotive Quality Systems Standard 7
D Is Cpk required for all Attribute Data Special Characteristics? IATF 16949 - Automotive Quality Systems Standard 6

Similar threads

Top Bottom