GMW 15571 - Flammability

R

rbriggs5145

I am fairly new to plastics and am being told that this specification requires you to have flammability tests performed on each part instead of a test sample as most customers accept. The language is, "All plastic parts located in the vehicle interior must test to GMW3232." Does anyone have experience with this and let me know if indeed each part has to be tested or just a sample? We have many parts that are made out of the same material so I do not want to pay $200-300 for a flammability test for each one. Thanks!
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
K GMW15920 and other GMW Requirements IATF 16949 - Automotive Quality Systems Standard 2
V Interpreting Zinc Plating Specification GMW 3044 - 6K96/48 APQP and PPAP 2
V PPAP Requirements including GMW 3179 Zinc Plating Specification Requirements APQP and PPAP 3
Q Does any one have a copy of GMW 3034? Various Other Specifications, Standards, and related Requirements 2
K GMW 3107 GMLAN Functional Handler Specification Customer and Company Specific Requirements 17
D GM's GMW 3059 - Restricted and Reportable Materials For Parts Specification Customer and Company Specific Requirements 4
M Substance reporting for PPAP GMW 3059 APQP and PPAP 41
R Flammability requirements for applied parts as per 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
H Electronic care product on patient bed side - Flammability requirements (62368-1) Hospitals, Clinics & other Health Care Providers 0
T Flammability testing Reliability Analysis - Predictions, Testing and Standards 6
P Flammability Testing of Aircraft Interior Materials Federal Aviation Administration (FAA) Standards and Requirements 0
O Flammability Requirement for Gaskets and Seals - UL 61010-1 CE Marking (Conformité Européene) / CB Scheme 6
S MSA (measurement system analysis) on Flammability tester? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
E IEC & UL 60601-1 Plastics Flammability - Guidance on flame-rated plastics usage IEC 60601 - Medical Electrical Equipment Safety Standards Series 11
R FMVSS 302 Flammability Testing Certification Quality Manager and Management Related Issues 2
J Flammability: Testing Burn Rate with Improper Sample Size fmvss 302 Various Other Specifications, Standards, and related Requirements 1
B Flammability Ratings for Internal Battery & Hand-Held ME Equipment IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
K ISO 3795 FMVSS 302 Flammability - Automotive Quality Manager and Management Related Issues 5
L Flammability Rating - is FT4 a better rating than FT1? Other US Medical Device Regulations 2
D Should all materials used for ME Equipment have flammability of class V-0 or higher? IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
P Medical Device Insulated Wire Flammability Classifications FV-1, VW-1 and FT-1 (CSA) EU Medical Device Regulations 3
T Enclosure Flammability Rating of Molded-In Custom Color Liquid Concentrates IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
D Flammability EN 1021 - Polyurethane Foam that meets EN 1021-1 & 2 Other ISO and International Standards and European Regulations 3
M Cal 133 flammability standard - Medical Devices - Stupid Customer Tricks 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
C Flammability of medical textile - any relevant standards? ISO 13485:2016 - Medical Device Quality Management Systems 2
S What's difference between fmvss302 and GM6090M? Flammability of interior materials Various Other Specifications, Standards, and related Requirements 5
M Honda Requirement HES C 206 - Flammability specification Customer and Company Specific Requirements 10

Similar threads

Top Bottom