Go/No Go Qualification of a Test System

C

cheowkwen

#1
Hi all, I'm building a system which testing 30 LED units per instance. I would like run a Go/No Go qualification this system to see if this system can screen out 'dead' LED. Absolute measurement is not important in this system.

Currently I have 10 units which has been certified 'dead'. How should i run the analysis? Do i need to rotate the 10 parts throughout 30 slots? How should i do it? Is there any standard template that i should follow?

Please advise.
 
Elsmar Forum Sponsor

Stijloor

Leader
Super Moderator
#2
A Quick Bump!

Can someone help?

If your questions were answered here, please consider helping others.

Thank you very much!
 
Thread starter Similar threads Forum Replies Date
Stoic Details of Operational Qualification (OQ) test design for plastic extrusion processes, effect of material property noise, and GHTF/SG3/N99-10 US Medical Device Regulations 2
O Clean room performance qualification (pq) - How many times can I do each test? Manufacturing and Related Processes 8
S Development of a WPS / Qualification Test Records for D17.1 Various Other Specifications, Standards, and related Requirements 6
T New Packaging Line Performance Qualification (PQ) - Minimum Test Times ? Qualification and Validation (including 21 CFR Part 11) 3
S AWS D17.1 - Fusion Welding - Qualification Test Record Various Other Specifications, Standards, and related Requirements 4
R Sample Failure/Qualification Test Failure? - A few units were tested many years ago! AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
L Definition ATP (Acceptance Test Procedure) vs. QTP (Qualification Test Procedure) Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
B Test Method Qualification - Measurement Capability - What else is involved? Reliability Analysis - Predictions, Testing and Standards 1
M Machinery Qualification Runoff test QS-9000 - American Automotive Manufacturers Standard 3
K Analytical Method Qualification Vs Validation expectations ISO 13485:2016 - Medical Device Quality Management Systems 1
B ISO 13485 Qualification of R&D Equipment Qualification and Validation (including 21 CFR Part 11) 1
F Supplier : Product Qualification Supplier Quality Assurance and other Supplier Issues 0
V Is it required to recalibrate reference- standard instruments after equipment qualification General Measurement Device and Calibration Topics 0
C Sample qualification to be IEC 60601-1 series tested IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
J Revamping Supplier Qualification, Re-evaluation, and Monitoring Requirements ISO 13485:2016 - Medical Device Quality Management Systems 8
S Performance Qualification and Process Validation ISO 13485:2016 - Medical Device Quality Management Systems 5
B Clean room shut down and re-validation or re-qualification? Other Medical Device Related Standards 6
Y Creating Equipment qualification protocol Qualification and Validation (including 21 CFR Part 11) 2
W Medical Device - fixture qualification and MSA Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
G RO/DI water system qualification Qualification and Validation (including 21 CFR Part 11) 3
A Qualification of clinical assessment scales EU Medical Device Regulations 1
K Supplier Qualification for Engineering Consultant? Supplier Quality Assurance and other Supplier Issues 3
F Component maintenance qualification - Regulation (EU) No 1321/2014 Article 5 EASA and JAA Aviation Standards and Requirements 6
I IATF Lab Scope Testing Qualification and Competency Documentation IATF 16949 - Automotive Quality Systems Standard 3
R Qualification list of businesses approved to Off-Shore Aerospace work. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
S Qualification question - ISO 13485 - Setting up a small lab Reliability Analysis - Predictions, Testing and Standards 2
E Qualification for non gmp service providers Supplier Quality Assurance and other Supplier Issues 1
V Process, component or full product re-qualification: leaded to unleaded solder Qualification and Validation (including 21 CFR Part 11) 8
DuncanGibbons Understanding the applicability of Design of Experiments to the IQ OQ PQ qualification approach Qualification and Validation (including 21 CFR Part 11) 5
Y Examples of TRB Reports for MIL-PRF-31032 Qualification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4
K PQ validation qualification - Asked to write a PQ protocol ISO 13485:2016 - Medical Device Quality Management Systems 6
dinaroxentool Question about qualification as a medical device or accessory in Europe EU Medical Device Regulations 2
T Qualification testing of Lead acid batteries Reliability Analysis - Predictions, Testing and Standards 0
Z Qualification of AzureDevOps in Gxp Qualification and Validation (including 21 CFR Part 11) 12
E Equipment Qualification - IQ/OQ per ISO 13485:2016 section 7.5.6 Process validation ISO 13485:2016 - Medical Device Quality Management Systems 7
D Determining of sample size for 'Operational Qualification' AQL - Acceptable Quality Level 5
B VDA 6.3 Qualification as Process Auditor training course and exam VDA Standards - Germany's Automotive Standards 0
D Performance Qualification per GHTF Guidance Other Medical Device Related Standards 12
M Informational EU – Guidance on Qualification and Classification of Software in Regulation (EU) 2017/745 – MDR and Regulation (EU) 2017/746 – IVDR Medical Device and FDA Regulations and Standards News 2
dgrainger Informational MDCG 2019-11: Guidance on Qualification and Classification of Software in Regulation (EU) 2017/745 – MDR and Regulation (EU) 2017/746 – IVDR Medical Device and FDA Regulations and Standards News 0
H How to prepare Performance Qualification (PQ) for autoclave General Measurement Device and Calibration Topics 2
D ISO 13485 - Equipment validation , qualification Qualification and Validation (including 21 CFR Part 11) 6
DuncanGibbons Qualification vs Certification in an Aerospace context AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
Z Operational Qualification for Injection Molding Supplier Quality Assurance and other Supplier Issues 6
S AIAG CQI Auditor Qualification and 3rd Party Certification Requirements General Auditing Discussions 2
D FDA Biomarker Qualification Program - Has anyone prepared an application? Medical Device and FDA Regulations and Standards News 0
R Qualification of Distributors such as McMaster-Carr and Digikey to Medical Device Companies ISO 13485:2016 - Medical Device Quality Management Systems 3
xcanals_tecno-med.es Qualification of sterilization indicators as medical devices with the EU MDR 2017/745 EU Medical Device Regulations 8
Z Training Qualification Matrix for ISO 9001:2015 Audit General Auditing Discussions 8

Similar threads

Top Bottom