Go/No Go tap gage vs. Go/No Go thread gage

E

Eloy Gomez

#1
Go/No Go tap gage vs. Go/No Go thread gage? Are these the same?
I came across a question on the best way on how to measure a tapped hole - Answer A= Go/No Go Tap and anwer B= Go/No go plug gage and C= A threaded ring gage.

Now I now what a ring gage is and I know a plug gage as well, but what is a Go/No Go Tap gage? Is this the same as a Thread Plug Gage?
 
Elsmar Forum Sponsor

Jim Wynne

Staff member
Admin
#2
Go/No Go tap gage vs. Go/No Go thread gage? Are these the same?
I came across a question on the best way on how to measure a tapped hole - Answer A= Go/No Go Tap and anwer B= Go/No go plug gage and C= A threaded ring gage.

Now I now what a ring gage is and I know a plug gage as well, but what is a Go/No Go Tap gage? Is this the same as a Thread Plug Gage?
"Go/No Go Tap" ≠ "Go/No Go Tap Gage." Answer "A" refers to a tap, not a tap gage.

ETA: Also, there is no such thing as a Go/No Go tap, so you can be pretty sure that "A" is not the right answer.
 
Last edited:
B

brahmaiah

#3
Go/No Go tap gage vs. Go/No Go thread gage? Are these the same?
I came across a question on the best way on how to measure a tapped hole - Answer A= Go/No Go Tap and anwer B= Go/No go plug gage and C= A threaded ring gage.

Now I now what a ring gage is and I know a plug gage as well, but what is a Go/No Go Tap gage? Is this the same as a Thread Plug Gage?
Answer B is correct.
V.J.BRAHMAIAH
 
Thread starter Similar threads Forum Replies Date
kedarg6500 What is a 5/8 inch NS HSG tap & drill size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
somashekar Why does a tap leak... Funny Stuff - Jokes and Humour 2
P Cutting and Tapping Titanium Material - What tap material is recomended Manufacturing and Related Processes 3
M Measuring a tap hook angle - ANY illustrations/pictures for the correct method? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Hardware Naming and Description issue - Is TAP BOLT an industry common term? Manufacturing and Related Processes 14
P Poka Yoke For Breaking Screw Tap Manufacturing and Related Processes 26
Claes Gefvenberg Tap.... beer?! A dream come true? Coffee Break and Water Cooler Discussions 0
Marc The FBI Wants to Tap the Net - 2001 to 2014 After Work and Weekend Discussion Topics 21
T Plug Gage Calibration Calibration and Metrology Software and Hardware 1
L Gage R&R TMV Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
S MSA for attribute relation gage Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
E Zero part to part variation - Gage R&R project Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 15
M Gage R&R and right way to measure Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
L Gage RandR on automated equipment. IATF 16949 - Automotive Quality Systems Standard 7
B Gage calibration frequency, ISO and IATF - What are the requirements Calibration Frequency (Interval) 3
D Difference between Test Method Validation and Gage R&R Qualification and Validation (including 21 CFR Part 11) 18
R Determining Uncertainty from Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
C Correct Calibration Method for Dial Depth Gage General Measurement Device and Calibration Topics 6
C Gage Block Wringing General Measurement Device and Calibration Topics 3
B Gage R&R with NDC=1 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
S Type 1 Gage R&R or something else? Reliability Analysis - Predictions, Testing and Standards 6
G Should I perform Gage R&R only at the beginning of a new project? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
G Gage R&R - Where am I going wrong? Part of a FAIR submission (Aerospace) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R Gage R&R Excel templates Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K Gage R&R with more than 3 appraisers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Anerol C Gage R&R Template AIAG 4th Edition IATF 16949 - Automotive Quality Systems Standard 3
T Attributes SPC study - Attributive control (Go gage) Statistical Analysis Tools, Techniques and SPC 5
S Capability or Gage R&R Study for Leak Tester? Reliability Analysis - Predictions, Testing and Standards 15
N % Tolerance - Type 1 study on the gages, then a gage R&R (ANOVA) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Definitive answer on Type 1 vs Type 2 vs Type 3 Gage Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
V Gage Management and Gage R&R Software General Measurement Device and Calibration Topics 1
D Gage R&R Study on Load Cells - Large chemical blending tanks IATF 16949 - Automotive Quality Systems Standard 1
B Minitab Type 1 Gage Study on True Position Question Measurement Uncertainty (MU) 1
S Gage R&R on alloy Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
8 Need Help - Runout - Function Gage Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
L Gage R&R studies for identical Devices - Need to confirm the requirement to perform them Reliability Analysis - Predictions, Testing and Standards 2
G Stab Pin Size For Check Gage Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
E Functional Gage for TOP applied at RFS Design and Development of Products and Processes 5
F No reproducibility Error in Gage R&R? Reliability Analysis - Predictions, Testing and Standards 4
M Template for Attribute Gage R & R wanted Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
G Warning about Deltronic Gage Pins - The "Certification of Accuracy" document General Measurement Device and Calibration Topics 13
A Gage type 1 study on CMM Capability, Accuracy and Stability - Processes, Machines, etc. 2
Q Gage R&R for Instant Measurement Machine Manufacturing and Related Processes 6
M Gage R&R with large inter part variance - Torque Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
D Do we need normal data for gage r&r studies? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
D Do I need part variation while doing Destructive Variable Gage R&R MSA study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
S Gage R&R Standard Deviations Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
J Informational Gage R&R: Swapping operators Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
S Gage R & R for large amount of inspections IATF 16949 - Automotive Quality Systems Standard 10

Similar threads

Top Bottom