SBS - The best value in QMS software

Hardware Naming and Description issue - Is TAP BOLT an industry common term?

Jim Wynne

Jim Wynne

Staff member
Admin
#11
#11
Re: Hardware Naming Question

Phil Fields said:
All good information, and dare I say it, common sense. What I really wanted to verfy was:
Is “TAP BOLT” and industry common term?
If it is I wanted Engineer to chnge its description from SPCL (special) which it is not.

Phil
Click to expand...
Yes, "tap bolt" is commonly used to describe a fully-threaded bolt. In fact, if you included "tap bolt" in the description you would probably be safe in eliminating the "fully-threaded" wording.
 
Standard Work Instruction Software by Dozuki
Elsmar Forum Sponsor
L

Lisequality

#12
#12
Re: Hardware Naming Question

"Tap bolts are full thread with coarse or fine threads. Tap bolts meet SAE J-429 specifications. "

This description is used by bolts manufacturers. It does not say anywhere that they are suppossed to be half threaded. But I agree that with a part number, the mistake should not have happenned.
Lise
 
Jim Wynne

Jim Wynne

Staff member
Admin
#13
#13
Re: Hardware Naming Question

Lisequality said:
"Tap bolts are full thread with coarse or fine threads. Tap bolts meet SAE J-429 specifications. "

This description is used by bolts manufacturers. It does not say anywhere that they are suppossed to be half threaded. But I agree that with a part number, the mistake should not have happenned.
Lise
Click to expand...
Lise,

You put that first sentence in quotes but don't say who you're quoting. Not all tap bolts meet SAE J-429 requirements.
 
L

Lisequality

#14
#14
Re: Hardware Naming Question

Jim,
You are right, I was quoting a specific supplier and wrote his comment.
It does not mean that all suppliers of tap bolts meet these requirements.
My apologies.
Lise
 
Jim Wynne

Jim Wynne

Staff member
Admin
#15
#15
Re: Hardware Naming Question

Lisequality said:
Jim,
You are right, I was quoting a specific supplier and wrote his comment.
It does not mean that all suppliers of tap bolts meet these requirements.
My apologies.
Lise
Click to expand...
Thanks--no need to apologize. I just wanted to make sure no one got confused (like me :D).
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
F Biocompatibility evaluation for Hardware/Interface Components? Other Medical Device Related Standards 12
D IEC 62304 Risk Classification - With and without hardware control IEC 62304 - Medical Device Software Life Cycle Processes 2
W Air Quality Measurement Hardware and Software General Measurement Device and Calibration Topics 11
A Components of a medical device - Hardware robotic hand EU Medical Device Regulations 3
B Documenting hardware on Form 2 of AS9102 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
R Validation of Medical Device Hardware containing Software - How many to Validate ISO 13485:2016 - Medical Device Quality Management Systems 1
S Mammography standards or regulations for radiology software (no hardware)? Other Medical Device and Orthopedic Related Topics 0
C PCBA Hardware Component different failure types - How to rate detection? FMEA and Control Plans 8
P Software requirement and design specifications - Medical device contains both hardware and software IEC 62304 - Medical Device Software Life Cycle Processes 2
N Configuration Management - Physical Audit and Functional Audit for Software and Hardware General Auditing Discussions 4
C Supplier Assessment for Hardware supporting SaMD ISO 13485:2016 - Medical Device Quality Management Systems 1
M Missing Hardware in Accessory Kits Manufacturing and Related Processes 5
J Hardware Receiving Inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 12
S Testing software-only device on hardware - What are the hardware parameters? Software Quality Assurance 6
C Aerospace Hardware Revision Control AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
M Finding a hardware supplier/distributor compliant with RoHS RoHS, REACH, ELV, IMDS and Restricted Substances 1
N Specifying a MINITAB PC Hardware - What matters? Using Minitab Software 2
K Hardware and OS Responsibility in FDA 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 6
E Hardware (Such as Rivets and Bolts) - Chemical and Physical Test Reports AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
T Necessary test documents for Class II Medical Device Hardware and Firmware ISO 13485:2016 - Medical Device Quality Management Systems 9
V What are the criteria for determining extent of requalification (hardware upgrade) ISO 13485:2016 - Medical Device Quality Management Systems 2
S Use of Non-Medically Test Hardware in Medical Environment IEC 60601 - Medical Electrical Equipment Safety Standards Series 15
K Use of off the shelf hardware in Medical Devices class II IEC 60601 - Medical Electrical Equipment Safety Standards Series 10
S CMM Hardware - Renishaw Probe Magnetism question Calibration and Metrology Software and Hardware 8
R Triggering Root Cause Analysis for Hardware Returns Nonconformance and Corrective Action 3
F Traceability Requirements for Computer Hardware Equipment under ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 2
I Defining the scope for ISO 9001 Registration - Software, Hardware and Customer Care ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
G Assessing Process Capability on Variation (Hardware Adjustment Mean Shift) Capability, Accuracy and Stability - Processes, Machines, etc. 4
M Mobile Medical Platforms - How to deal with Supplier Hardware/Software Changes? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
michellemmm Hardware Design Standards - Printed Circuit Board Assembly EASA and JAA Aviation Standards and Requirements 2
B Optical Steel Surface Inspection System (best hardware to recommend) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
B J-STD-001DS Space Applications Electronic Hardware Addendum Certification Manufacturing and Related Processes 3
I Minitab 14 USB Hardware Key Availbility Using Minitab Software 7
K AS9100 Suppliers of Hardware, Fasteners, Washers, etc. - What standard to use? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
R Supplier Quality Investigation - Software and Hardware Issues Supplier Quality Assurance and other Supplier Issues 8
N Audit questions for software/hardware selling company Software Quality Assurance 17
N Internal Auditing - IT software hardware selling company Internal Auditing 5
C AS9102 Form 2 and Standard Hardware clarification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
U 1. Hardware Life Cycle; 2. Requirements tracking; 3. FMEA Risk Analysis ISO 13485:2016 - Medical Device Quality Management Systems 7
N What Defines Flight hardware? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 25
A DFMEA for Hardware (Automotive ECU with embedded software) FMEA and Control Plans 3
M Mil-Spec Hardware (MS, AN, NAS) Suppliers on AS9100 Approved Suppliers List AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
J AS9102 section 3 - Who can explain what ''standard catalog hardware '' means AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
J AS9102 - Do I have to do FAI for all Standard Catalog Hardware items???? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
G What PC System (OS, Hardware, etc.) do you run? After Work and Weekend Discussion Topics 28
O GRR (Gage R&R) Method for Camera Vision Inspection System Hardware and Software Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
apestate Custom hardware product - What acceptable quality level (AQL) is expected in the US? AQL - Acceptable Quality Level 4
F Definition Test Hardware - "Comparative References such as Test Hardware" Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
I Hazard Identification and Naming ISO 14971 - Medical Device Risk Management 10
D Naming of SOP doc's - Specific to Calibrations ISO 13485:2016 - Medical Device Quality Management Systems 2

Similar threads

Top Bottom